Influence of calcium chloride on the thermal behavior of heavy and alkali metals in sewage sludge incineration

In order to separate and reuse heavy and alkali metals from flue gas during sewage sludge incineration, experiments were carried out in a pilot incinerator. The experimental results show that most of the heavy and alkali metals form condensed phase at temperature above 600 degrees C. With the addition of 5% calcium chloride into sewage sludge, the gas/solid transformation temperature of part of the metals (As, Cu, Mg and Na) is evidently decreased due to the formation of chloride, while calcium chloride seems to have no significant influence on Zn and P. Moreover, the mass fractions of some heavy and alkali metals in the collected fly ash are relatively high. For example, the mass fractions for Pb and Cu in the fly ash collected by the filter are 1.19% and 19.7%, respectively, which are well above those in lead and copper ores. In the case of adding 5% calcium chloride, the heavy and alkali metals can be divided into three groups based on their conversion temperature: Group A that includes Na, Zn, K, Mg and P, which are converted into condensed phase above 600 degrees C; Group B that includes Pb and Cu which solidify when the temperature is above 400 degrees C; and Group C that includes As, whose condensation temperature is as low as 300 degrees C.     

Study on 14C-BHA absorption and distribution in rat

BHA was administered to rats at doses of 5 or 500 mg/kg for seven days. ¹⁴C-BHA absorption was investigated on the eighth day and compared with animals receiving a single dose of 5 or 500 mg/kg BHA. Absorption of ¹⁴C-BHA was proportionately greater at the high dose rats. ¹⁴C distribution was 3–6 times higher in the forestomach than in the pyloric region of the stomach. The urinary excretion of BHA conjugates was not dependent on pretreatment with BHA or on the dose.     

A practical and simple method in fractional determination of ambient forms of mercury in air

A collecting method to prepare a fractional determination of ambient forms of mercury in air is proposed. Particulate mercury is collected by a glass fiber filter. Sequential trap tubes consist of four long and slender quartz tubes, in which the Chromosorb W treated with HC$\text{l}$ gas for Hg(II), the Chromosorb W treated with 0.1 M NaOH for methylmercury, the silver-wire tip for metallic mercury and the gold plate tip for dimethylmercury are packed. The collection efficiency for these trap tubes was in the range of about 85 ～ 100% at the μg or ng concentration level. With this method, the air was collected by suction at the rate of 1.5 $\text{l}$/min. for about five hours, the detection limit being 0.2 ng Hg/m³. The results indicate that the regional distribution of total mercury in air was considerably greater in the volcanic and hot spring regions. Mercury species was found to be mostly Hg(II), followed by metallic mercury, methylmercury, dimethylmercury and particulate mercury in this order.     

Effect of humic acids on the toxicity of pollutants to Chlamydomonas reinhardtii: Investigation by a microscale algal growth inhibition test

Dissolved humic substances (DHSs) are the major components of organic matter in the aquatic environment. DHSs are well known to considerably affect the speciation, solubility, and toxicity of a wide variety of pollutants in the aquatic environment. In this study, the effects of the toxicity of heavy metals and hydrophobic organic pollutants (HOPs) on Chlamydomonas reinhardtii in the presence of humic acid (HA) were examined by a microscale algal growth inhibition (μ-AGI) test based on spectrophotometric detection. To clarify the relationship between the chemical properties of HAs and the toxicity change of pollutants, eight HAs from different sources were prepared and used. HAs were responsible for mitigating the toxicity of Hg, Cu, pesticides (γ-HCH, 2,4-D, and DDT), and polycyclic aromatic hydrocarbons (PAHs) such as naphthalene (Nap), anthracene (Ant), and benzo[a]pyrene (BaP). In particular, an approximately 100-fold decrease in the toxicity of BaP was observed in the presence of 10 ppm HAs extracted from tropical peat. The results indicated that the carboxylic group content and the HA molecular weight are correlated to the changes in the heavy metal toxicity. For HOPs, the aromaticity and polarity of HAs are crucial for mitigating their toxicity. Furthermore, it was clearly shown that the lake water including a high concentration of DHSs collected from Central Kalimantan, Indonesia, reduced the toxicity of Hg and γ-HCH on Chlamydomonas reinhardtii.

Graphical abstract

     

Analysis of the migration of instantaneously injected cesium in artificial fractures of Lac du Bonnet granite, Manitoba, Canada

Breakthrough curves of ¹³⁷Cs and tritiated water injected instantaneously into artificial fractures in Lac du Bonnet granite were analyzed using the analytical solution for a single rock-fracture system and assuming the linear sorption isotherm of the solute. Parameters of nuclide diffusion and sorption in rock matrices, obtained by fitting, varied depending on the flow velocity in the fractures. According to theoretical calculations, different fracture flow velocities lead to different diffusion distances of nuclides in matrices at the same injection volume. As microscopic inhomogeneity is considered to exist in the rock matrix, the average diffusion-sorption characteristics of the matrix within the diffusion distance may have varied with the fracture flow velocity. Surface sorption was marked in fractures that had relatively high matrix sorption-diffusion capacities. The phenomenon was interpreted using the theoretical relationships developed between the surface sorption, matrix sorption and pore diffusion coefficient, and the porosity of matrices.The effect of the nonlinear sorption of solute was examined by numerically solving model equations that incorporate the nonlinear isotherm. This incorporation may contribute to the reduction of deviations between theoretical and experimental BTC's.     

Studies on the coupling product between oxidation products derived from pentachlorophenol and cyclodextrins

The coupling products (CPs), which were formed via the peroxosulfate catalyzed oxidation of pentachlorophenol (PCP) with iron(III)-tetrakis(sulfonatophenyl)porphyrin (Fe(III)-TPPS) in the presence of hydroxypropyl-beta -cyclodextrin (HP-beta -CD) or HP-gamma -CD, were separated by ultrafiltration from the reaction mixture. When the percentages of chlorine species in the reaction mixture were calculated from the concentrations of organic chlorine in the reaction mixture and CPs, 10-25% of chlorine species in the reaction mixture was organic chlorine that was incorporated into CDs. Analyses of the CPs by pyrolysis-GC/MS (Py-GC/MS) and 13C NMR showed that the PCP-derived products were covalently incorporated into the CDs. To evaluate the acute toxicity of the CPs, a Microtox test was examined. Toxicities of the CPs were reduced slightly, compared to the controls (PCP alone and PCP + reaction blanks). In the reaction blanks, mesaconic acid (MA) moieties were detected as a result of the oxidation of CDs in the absence of PCP. Thus, factors in the toxicities, detected in the CPs, can be attributed to the oxidation products derived from CDs, such as MA, as well as the PCP-derived products incorporated into the CDs.     

Distribution behavior of pyrene to adsorbed humic acids on kaolin

The distribution behavior of pyrene on humic acid (HA)-kaolin complexes, prepared by adsorbing HA on kaolin, was investigated by batch experiments. The distribution coefficient (Kd) of pyrene on the HA-kaolin complex increased with the fraction (f(oc)) of organic carbon adsorbed to the surface of the kaolin. This can be attributed to hydrophobic interactions between pyrene and the adsorbed HAs. The effects of adsorbed HAs were quantitatively evaluated by calculating the distribution coefficient (K(oc)) and affinity constant (K(oc)ads) for pyrene to the adsorbed HAs. A fluorescence quenching method was employed to determine the affinity constant (K(oc)aq) of pyrene to HAs dissolved in an aqueous solution. When the K(oc) values were compared with the K(oc)aq values, the K(oc) values were found to be 4 to 11 times larger than the K(oc)aq values. On the other hand, the K(oc)ads values were 4 to 9 times larger than the K(oc)aq values. These indicate that the affinity for pyrene is enhanced by the adsorption of HAs to kaolin. In addition, the K(oc) values increased with increasing average molecular weights of the HAs. These results demonstrate that HAs, when they are adsorbed to clay minerals, play an important role in the deposition of polycyclic aromatic hydrocarbons (PAHs) in a soil environment.     

Use of additives to enhance the removal of phenols from water treated with horseradish and hydrogen peroxide

Use of additives, such as polyethylene glycol (PEG), selected surfactants, chitosan gel, or activated carbon, has been shown to enhance enzymatic treatment of water polluted with organic compounds. In this study, additives were used to facilitate the removal of 2,4-dichlorophenol (2,4-DCP) from water using minced horseradish (Armoracia rusticana P. Gaertn. et al.) as a carrier of peroxidase activity. The specific objectives of the study were to (i) enhance the pollutant removal activity of minced horseradish by the addition of PEG and other additives (e.g., Tween 20, Triton X-100, and rhamnolipid); (ii) eliminate colored reaction products by the addition of chitosan; and (iii) eliminate color by amending treated water with activated carbon. The disappearance of 2,4-DCP in horseradish-treated water samples amended with PEG or various surfactants (75-90%) was greatly increased over that observed in nonamended samples (29%). The effect of PEG depended on its average molecular weight. As indicated by visible spectrophotometry, enclosing horseradish pieces between two sealed chitosan films completely eliminated colored reaction products; however, the decolorization was accompanied by a reduction in 2,4-DCP removal (from 95 to 60%). On the other hand, commercially available activated carbon completely removed colored reaction products from the treated water without reducing the removal efficiency. Based on the results obtained, it can be concluded that the use of additives may considerably improve the quality of wastewater treated by plant materials.     

Simultaneous determination of atmospheric sulfur and nitrogen oxides using a battery-operated portable filter pack sampler

We developed a method to analyze atmospheric SO(x) (particulate SO(4)(2-)+ gaseous SO(2)) and NO(x) (NO + NO(2)) simultaneously using a battery-operated portable filter pack sampler. NO(x) determination using a filter pack method is new. SO(x) and NO(x) were collected on a Na(2)CO(3) filter and PTIO (2-phenyl-4,4,5,5-tetramethylimidazoline-3-oxide-1-oxyl) + TEA (triethanolamine) filters (6 piled sheets), respectively. Aqueous solutions were then used to extract pollutants trapped by the filters and the resulting extracts were pre-cleaned (e.g. elimination of PTIO) and analyzed for sulfate and nitrite by ion chromatography. Recoveries of SO(2) and NO(x) from standard pollutant gases and consistency of the field data with those from other instrumental methods were examined to evaluate our method. SO(x) and NO(x) could be analyzed accurately with determination limits of 0.2 ppbv and 1.0 ppbv (as daily average concentrations), respectively. The sampler can determine SO(x) and NO(x) concentrations at mountainous or remote sites without needing an electric power supply.