The effect of a woodstove changeout on ambient levels of PM2.5 and chemical tracers for woodsmoke in Libby,Montana

Residential woodstoves are the single largest source of PM_2.5 in Libby, MT, resulting in the community being designated as a nonattainment area for PM_2.5. Beginning in 2005, a community-wide woodstove changeout program was implemented that replaced nearly 1200 old stoves with EPA-certified units. In an effort to track the reduction of woodsmoke particles throughout the program, ambient PM_2.5 samples were collected before, during, and after the changeout. These samples were analyzed for seven selected woodsmoke tracers, including vanillin, acetovanillone, guaiacol, 4-ethylguaiacol (methoxyphenols), levoglucosan (sugar anhydride), abietic acid, and dehydroabietic acid (resin acids). Results of the changeout showed that PM_2.5 levels decreased by 20% during the changeout period, while levels of the seven chosen tracer compounds gave variable responses. Levoglucosan levels decreased by 50% while both resin acids increased after the changeout, suggesting a change in the chemistry of the particles. No trend was observed in the levels of methoxyphenols as a group over the changeout period. The results suggest that the concentrations of woodsmoke related PM_2.5 in the Libby airshed have decreased; however, the chemistry of the emitted particles also changed when old woodstoves were replaced with new EPA-certified stoves.     

Direct measurement of fugitive emissions of hydrocarbons from a refinery

Refineries are a source of emissions of volatile hydrocarbons that contribute to the formation of smog and ozone. Fugitive emissions of hydrocarbons are difficult to measure and quantify. Currently these emissions are estimated based on standard emission factors for the type and use of equipment installed. Differential absorption light detection and ranging (DIAL) can remotely measure concentration profiles of hydrocarbons in the atmosphere up to several hundred meters from the instrument. When combined with wind speed and direction, downwind vertical DIAL scans can be used to calculate mass fluxes of the measured gas leaving the site. Using a mobile DIAL unit, a survey was completed at a Canadian refinery to quantify fugitive emissions of methane, C2+ hydrocarbons, and benzene and to apportion the hydrocarbon emissions to the various areas of the refinery. Refinery fugitive emissions as measured with DIAL during this demonstration study were 1240 kg/hr of C2+ hydrocarbons, 300 kg/hr of methane, and 5 kg/hr of benzene. Storage tanks accounted for over 50% of the total emissions of C2+ hydrocarbons and benzene. The coker area and cooling towers were also significant sources. The C2+ hydrocarbons emissions measured during the demonstration amounted to 0.17% of the mass of the refinery hydrocarbon throughput for that period. If the same loss were repeated throughout the year, the lost product would represent a value of US$3.1 million/yr (assuming US$40/bbl). The DIAL-measured hourly emissions of C2+ hydrocarbons were 15 times higher than the emission factor estimates and gave a different perspective on which areas of the refinery were the main source of emissions. Methods, such as DIAL, that can directly measure fugitive emissions would improve the effectiveness of efforts to reduce emissions, quantify the reduction in emissions, and improve the accuracy of emissions data that are reported to regulators and the public.     

Food-chain transfer of zinc from contaminated Urtica dioica and Acer pseudoplatanus L. to the aphids Microlophium carnosum and Drepanosiphum platanoidis Schrank

This study examines the food-chain transfer of Zn from two plant species, Urtica dioica (stinging nettle) and Acer pseudoplatanus (sycamore maple), into their corresponding aphid species, Microlophium carnosum and Drepanosiphum platanoidis. The plants were grown in a hydroponic system using solutions with increasing concentrations of Zn from 0.02 to 41.9 mg Zn/l. Above-ground tissue concentrations in U. dioica and M. carnosum increased with increasing Zn exposure (p < 0.001). Zn concentrations in A. pseudoplatanus also increased with solution concentration from the control to the 9.8 mg Zn/l solution, above which concentrations remained constant. Zn concentrations in both D. platanoidis and the phloem tissue of A. pseudoplatanus were not affected by the Zn concentration in the watering solution. It appears that A. pseudoplatanus was able to limit Zn transport in the phloem, resulting in constant Zn exposure to the aphids. Zn concentrations in D. platanoidis were around three times those in M. carnosum.     

The impact of wood smoke on ambient PM2.5 in northern Rocky Mountain valley communities

During the winters of 2006/2007 and 2007/2008, PM_2.5 source apportionment programs were carried out within five western Montana valley communities. Filter samples were analyzed for mass and chemical composition. Information was utilized in a Chemical Mass Balance (CMB) computer model to apportion the sources of PM_2.5. Results showed that wood smoke (likely residential woodstoves) was the major source of PM_2.5 in each of the communities, contributing from 56% to 77% of the measured wintertime PM_2.5. Results of ¹⁴C analyses showed that between 44% and 76% of the measured PM_2.5 came from a new carbon (wood smoke) source, confirming the results of the CMB modeling. In summary, the CMB model results, coupled with the ¹⁴C results, support that wood smoke is the major contributor to the overall PM_2.5 mass in these rural, northern Rocky Mountain airsheds throughout the winter months.     

Remediation of metal contaminated soil with mineral-amended composts

This study examined the use of two composts derived from green waste and sewage sludge, amended with minerals (clinoptilolite or bentonite), for the remediation of metal-contaminated brownfield sites to transform them into greenspace. Soils contaminated with high or low levels of metals were mixed with the mineral-enhanced composts at different ratios and assessed by leaching tests, biomass production and metal accumulation of ryegrass (Lolium perenne L.). The results showed that the green waste compost reduced the leaching of Cd and Zn up to 48% whereas the composted sewage sludge doubled the leachate concentration of Zn. However, the same soil amended with composted sewage sludge showed an efficient reduction in plant concentrations of Cd, Cu, Pb or Zn by up to 80%. The results suggest that metal immobilisation and bioavailability are governed by the formation of complexes between the metals and organic matter. The amendment with minerals had only limited effects.     

Effect of process conditions on the analysis of free and conjugated estrogen hormones by solid-phase extraction–gas chromatography/mass spectrometry (SPE–GC/MS)

Simultaneous analysis of 11 free estrogen hormones and five conjugated estrogens in water and municipal wastewater was studied. The analytical method was developed and tested for different types of solid-phase extraction adsorbents, eluents, sample containers and storage conditions, derivatization, and matrix effects. Varian Bond Elut C-18 solid-phase extraction adsorbent cartridge was selected based on its high recoveries for both free and conjugated estrogens. Sample storage conditions, as well as selection and pretreatment of sample container materials, can affect the trace level analysis of estrogens. Silanization of glassware is observed to provide low relative standard deviation (RSD) in the analysis and less percentage loss due to contacting with sample container materials. Light exposure during the test can significantly impact the results. The derivatized samples stored at −20°C for at least 6 days showed less than 10.5% average RSD in the analysis. The recovery efficiency in clean water varies from 72% to 101% for free estrogens and 78% to 82% for conjugated estrogens. The method detection limits (MDL) for most of the compounds range from 30 to 870 ng/L using a sample volume of 200 mL. With a sample volume of 3 L, the most sensitive compound produces a MDL of 0.03 ng/L. Dilute methanol is used to wash the loaded cartridge as a cleanup step in order to remove interfering species during analysis of wastewater samples. Using the optimized analytical methods, the concentration level of free estrogens in the influent and effluent municipal wastewaters is tested.     

Water resources issues of small island developing states

The water resources of most small island developing states (SIDS) are often very limited and require special consideration to ensure that they are developed and managed in a sustainable manner. Many small islands, typically located in the humid tropics, have no surface water resources and rely on limited groundwater resources in the form of thin freshwater lenses. The exposed location of small islands makes them particularly vulnerable to natural disasters such as cyclones, floods and droughts. Pollution from population centres and from agricultural and other activities is an increasing problem. This article provides an overview of the water resources of small islands, and the main problems and issues related to water resources. Some suggested solutions, based on practical experiences, are offered for water resource assessment and monitoring programmes, and water resource development. Water resource policy, planning and management issues are also addressed, and suggested approaches for resolving some of the major water resource problems presented.     

Effects of amended compost on mobility and uptake of arsenic by rye grass in contaminated soil

Arsenic poses a major environmental and human health problem because of its carcinogenic nature and effect on the ecosystem. Therefore, a cost effective and socially acceptable technique is needed for its remediation. The effect of different combinations of compost amended with zeolite and/or iron oxide (up to 20% w/w) was tested on a contaminated soil with high arsenic levels (34470 mg kg(-1)). The bioavailability of arsenic was determined in terms of uptake by rye grass (Lolium perenne L.) under greenhouse experimental conditions. The results indicated that the arsenic concentrations in the rye grass was reduced to 2 mg kg(-1) dry weight by using 15% compost with 5% iron oxide and 15% compost with 5% zeolite. Less than 0.01% of the total arsenic content in the soil was being taken up by the plants. Both treatments were effective in establishing significantly higher plant growth on the contaminated soil compared to other treatments. The results from sequential extraction tests indicated that in all the compost-amended soils, there was a reduction in the soluble fraction (10-37%). Arsenic in soil was examined using Scanning Electron Microscopy coupled with Energy Dispersive X-ray spectroscopy. The results indicated that arsenic was distributed mostly within the matrix of iron and oxygen in treated samples. Amongst various treatment mixtures tested, high percent of compost (15%) with zeolite (5%) and/or iron oxide (5%) is effective in reducing arsenic uptake by plants and establish re-vegetation on the contaminated soil.     

Spatial Factors Influencing Winter Primary Particle Sampling and Interpretation

ABSTRACT

Aerosol samplers collect material that is locally generated as well as that transported from upwind; knowing the extent of the area from which the sample is drawn is necessary for proper interpretation of sampler data. The U.S. Environmental Protection Agency (EPA) PM_2.5 monitoring guidelines recognize a conceptual hierarchy of sampler spatial representation, but provide no objective measures of a site’s spatial representativeness. A case study of a sampler tributary area in central California provides insights into the factors that determine a sampler’s spatial representation. Winter diurnal cycles of fine particle concentrations at places of habitation ranging from urban cores to small farm towns show a marked cycle that can be linked to local human activity. Assessment of the possible causes of the observed cycles leads to the hypothesis that local sources dominate primary particle mass in winter samples. The hypothesis was tested using a simple model to relate routine 24-hr PM₁₀ and PM_2.5 samples to a sampler’s surroundings. Model results indicate that even minor sources very close to a sampler will overwhelm any regional component in a sample. The results for the cases studied also demonstrate that, in winter, most coarse (PM_10-2.5) particles collected are less than 2 hr old, and most primary fine (PM_2.5) particles are less than 4 hr old. Even on days that are not truly “stagnant,” samplers are very strongly influenced by their immediate surroundings (distances less than 10 km), and only weakly influenced by regional emissions.

The implications for interpretation of sample analyses are as follows: 1. Typical PM sampling networks are unlikely to represent regional conditions;

2. Similarity of samples in time and space between widely separated samplers probably arises from sampling analogous local environments rather than a uniformly mixed regional air mass;

3. Even weak sources near a sampler will prevent regionally representative samples, so that “background” specification in models can be strongly skewed by misapplication of sampler data;

4. Source-receptor relationships within a single modeling grid cell can cause measured and modeled source impacts at a sampler to diverge by orders of magnitude, even for grid cells as small as 1 km; and

5. Differential deposition of coarse and fine particles will skew source apportionment by chemical tracers unless the tracers and the source emissions have the same size distribution.