The impact of wood smoke on ambient PM2.5 in northern Rocky Mountain valley communities

During the winters of 2006/2007 and 2007/2008, PM_2.5 source apportionment programs were carried out within five western Montana valley communities. Filter samples were analyzed for mass and chemical composition. Information was utilized in a Chemical Mass Balance (CMB) computer model to apportion the sources of PM_2.5. Results showed that wood smoke (likely residential woodstoves) was the major source of PM_2.5 in each of the communities, contributing from 56% to 77% of the measured wintertime PM_2.5. Results of ¹⁴C analyses showed that between 44% and 76% of the measured PM_2.5 came from a new carbon (wood smoke) source, confirming the results of the CMB modeling. In summary, the CMB model results, coupled with the ¹⁴C results, support that wood smoke is the major contributor to the overall PM_2.5 mass in these rural, northern Rocky Mountain airsheds throughout the winter months.     

Direct measurement of fugitive emissions of hydrocarbons from a refinery

Refineries are a source of emissions of volatile hydrocarbons that contribute to the formation of smog and ozone. Fugitive emissions of hydrocarbons are difficult to measure and quantify. Currently these emissions are estimated based on standard emission factors for the type and use of equipment installed. Differential absorption light detection and ranging (DIAL) can remotely measure concentration profiles of hydrocarbons in the atmosphere up to several hundred meters from the instrument. When combined with wind speed and direction, downwind vertical DIAL scans can be used to calculate mass fluxes of the measured gas leaving the site. Using a mobile DIAL unit, a survey was completed at a Canadian refinery to quantify fugitive emissions of methane, C2+ hydrocarbons, and benzene and to apportion the hydrocarbon emissions to the various areas of the refinery. Refinery fugitive emissions as measured with DIAL during this demonstration study were 1240 kg/hr of C2+ hydrocarbons, 300 kg/hr of methane, and 5 kg/hr of benzene. Storage tanks accounted for over 50% of the total emissions of C2+ hydrocarbons and benzene. The coker area and cooling towers were also significant sources. The C2+ hydrocarbons emissions measured during the demonstration amounted to 0.17% of the mass of the refinery hydrocarbon throughput for that period. If the same loss were repeated throughout the year, the lost product would represent a value of US$3.1 million/yr (assuming US$40/bbl). The DIAL-measured hourly emissions of C2+ hydrocarbons were 15 times higher than the emission factor estimates and gave a different perspective on which areas of the refinery were the main source of emissions. Methods, such as DIAL, that can directly measure fugitive emissions would improve the effectiveness of efforts to reduce emissions, quantify the reduction in emissions, and improve the accuracy of emissions data that are reported to regulators and the public.     

The effect of a woodstove changeout on ambient levels of PM2.5 and chemical tracers for woodsmoke in Libby,Montana

Residential woodstoves are the single largest source of PM_2.5 in Libby, MT, resulting in the community being designated as a nonattainment area for PM_2.5. Beginning in 2005, a community-wide woodstove changeout program was implemented that replaced nearly 1200 old stoves with EPA-certified units. In an effort to track the reduction of woodsmoke particles throughout the program, ambient PM_2.5 samples were collected before, during, and after the changeout. These samples were analyzed for seven selected woodsmoke tracers, including vanillin, acetovanillone, guaiacol, 4-ethylguaiacol (methoxyphenols), levoglucosan (sugar anhydride), abietic acid, and dehydroabietic acid (resin acids). Results of the changeout showed that PM_2.5 levels decreased by 20% during the changeout period, while levels of the seven chosen tracer compounds gave variable responses. Levoglucosan levels decreased by 50% while both resin acids increased after the changeout, suggesting a change in the chemistry of the particles. No trend was observed in the levels of methoxyphenols as a group over the changeout period. The results suggest that the concentrations of woodsmoke related PM_2.5 in the Libby airshed have decreased; however, the chemistry of the emitted particles also changed when old woodstoves were replaced with new EPA-certified stoves.     

Effect of process conditions on the analysis of free and conjugated estrogen hormones by solid-phase extraction–gas chromatography/mass spectrometry (SPE–GC/MS)

Simultaneous analysis of 11 free estrogen hormones and five conjugated estrogens in water and municipal wastewater was studied. The analytical method was developed and tested for different types of solid-phase extraction adsorbents, eluents, sample containers and storage conditions, derivatization, and matrix effects. Varian Bond Elut C-18 solid-phase extraction adsorbent cartridge was selected based on its high recoveries for both free and conjugated estrogens. Sample storage conditions, as well as selection and pretreatment of sample container materials, can affect the trace level analysis of estrogens. Silanization of glassware is observed to provide low relative standard deviation (RSD) in the analysis and less percentage loss due to contacting with sample container materials. Light exposure during the test can significantly impact the results. The derivatized samples stored at −20°C for at least 6 days showed less than 10.5% average RSD in the analysis. The recovery efficiency in clean water varies from 72% to 101% for free estrogens and 78% to 82% for conjugated estrogens. The method detection limits (MDL) for most of the compounds range from 30 to 870 ng/L using a sample volume of 200 mL. With a sample volume of 3 L, the most sensitive compound produces a MDL of 0.03 ng/L. Dilute methanol is used to wash the loaded cartridge as a cleanup step in order to remove interfering species during analysis of wastewater samples. Using the optimized analytical methods, the concentration level of free estrogens in the influent and effluent municipal wastewaters is tested.     

Remediation of metal contaminated soil with mineral-amended composts

This study examined the use of two composts derived from green waste and sewage sludge, amended with minerals (clinoptilolite or bentonite), for the remediation of metal-contaminated brownfield sites to transform them into greenspace. Soils contaminated with high or low levels of metals were mixed with the mineral-enhanced composts at different ratios and assessed by leaching tests, biomass production and metal accumulation of ryegrass (Lolium perenne L.). The results showed that the green waste compost reduced the leaching of Cd and Zn up to 48% whereas the composted sewage sludge doubled the leachate concentration of Zn. However, the same soil amended with composted sewage sludge showed an efficient reduction in plant concentrations of Cd, Cu, Pb or Zn by up to 80%. The results suggest that metal immobilisation and bioavailability are governed by the formation of complexes between the metals and organic matter. The amendment with minerals had only limited effects.     

Political transition and emergent forest‐conservation issues in Myanmar

Political and economic transitions have had substantial impacts on forest conservation. Where transitions are underway or anticipated, historical precedent and methods for systematically assessing future trends should be used to anticipate likely threats to forest conservation and design appropriate and prescient policy measures to counteract them. Myanmar is transitioning from an authoritarian, centralized state with a highly regulated economy to a more decentralized and economically liberal democracy and is working to end a long‐running civil war. With these transitions in mind, we used a horizon‐scanning approach to assess the 40 emerging issues most affecting Myanmar's forests, including internal conflict, land‐tenure insecurity, large‐scale agricultural development, demise of state timber enterprises, shortfalls in government revenue and capacity, and opening of new deforestation frontiers with new roads, mines, and hydroelectric dams. Averting these threats will require, for example, overhauling governance models, building capacity, improving infrastructure‐ and energy‐project planning, and reforming land‐tenure and environmental‐protection laws. Although challenges to conservation in Myanmar are daunting, the political transition offers an opportunity for conservationists and researchers to help shape a future that enhances Myanmar's social, economic, and environmental potential while learning and applying lessons from other countries. Our approach and results are relevant to other countries undergoing similar transitions.     

Spindle dynamics identification using particle swarm optimization

Optimal parameters to eliminate machining chatter may be identified using analytical stability models which require the dynamics of the tool-holder-spindle-machine assembly. Receptance coupling substructure analysis (RCSA) provides a useful analytical tool to couple measured spindle-machine dynamics with tool-holder models to predict the tool point frequency response function for the assembly. Previous research has demonstrated a procedure to determine all required spindle receptances from a single measurement, where each mode within the measurement bandwidth was modeled as a fixed-free Euler–Bernoulli beam and fit using a manual, iterative procedure. Here, a particle swarm optimization technique is described for fitting the spindle-machine measurement using a fixed-free Euler–Bernoulli beam model for each mode. The performance of the optimization process and RCSA in predicting the tool tip frequency response is evaluated and the results are presented.     

Interactive effects of water and controlled release urea on nitrogen metabolism,accumulation, translocation,and yield in summer maize

To investigate the interactive effects of water and N from controlled release urea (CRU) on N metabolism, accumulation, translocation, and yield in Zhengdan958 (a summer maize cultivar planted widely in China), three water levels (adequate water W3, mild water stress W2, severe water stress W1) and four amounts of CRU (N) (N0, N1, N2, and N3 were 0, 105, 210, and 315 kg N ha^?1, respectively) were carried out under the waterproof shed and soil column conditions. The results showed that yield, N metabolism, accumulation, and translocation were significantly affected by water, CRU, and their interactions after tasseling. Yields showed an increasing trend in response to N rates from 100.2 to 128.8 g plant^?1 under severe water stress (W1), from 124.7 to 174.6 g plant^?1 under mild water stress (W2), and from 143.7 to 177.0 g plant^?1 under adequate water conditions (W3). There was an associated optimum amount of N for each water level. Under W1 and W2, N3 treatments showed significant advantages in three N metabolism enzymes’ activities and the N accumulations, and yield and its components were highest. But the nitrogen harvest index (NHI) of N3 had no significant difference with other nitrogen treatments. Under W3, the N translocation efficiency (NTE) and N translocation conversion rate (NTCR) of N2 in stem and leaf were higher than those of N3, but the N metabolism enzymes’ activities and yields of N2 and N3 had no significant difference, which indicated that N2 was superior to N3. The N3 treatment under W2 and N2 under W3 increased the N accumulation capacity in maize grain as well as the N translocation to grain that contributed to the increase of 1000-gain weight and grains per ear after tasseling. Under this experimental condition, a CRU rate of 225 kg ha^?1 was the best treatment when the soil moisture content was 75 ± 5% of field capacity, but an N rate of 300 kg ha^?1 was superior when soil moisture content was maintained at 55 ± 5% of field capacity during the entire growing season.