SUSTAINABILITY AT THE LOCAL LEVEL: MANAGEMENT TOOLS AND MUNICIPAL TAX INCENTIVE MODEL

The implementation of sustainable development may seem a simple concept when written on paper. However to carry-out long term actions put forward by the Agenda 21 (AG21) at the local level represents one of the main challenges as municipal governments in general do not have the capacity to effectively implement the process. Regional environmental assessment (REA) has shown to be effective in supporting decision-making not only to correct environmental problems due to past unsustainable social-economic developments but also help local governments to implement sustainable actions. However this requires long-term investments of AG21 plans and projects. The allocation of regular and consistent financial resources is one of the main ingredients for the sustainable development process. But traditional plans and projects financed by national and/or international funds may not be sustainable in the long-term because they become dependent on external funding. Research demonstrate that innovative economic instruments such as ecotaxes represent a feasible alternative to sponsor local sustainability because taxes are collected permanently by the government and could be invested in continuous actions. Ecotaxes experiences have provided important reference to structure a municipal incentive model (MIM) to sponsor AG21’s environmental plans and projects on a long-term (permanent) basis. However sustainable development cannot be solely through economic investments. A comprehensive municipal environmental management scheme (MEMS) has been established to support the incentive model. The scheme seeks not only to improve local institutional framework but also incentive continuous participation of local stakeholders at all levels of society. Participatory events and the provision of incentives (educational and financial) are key to motivate society to protect the environment and support actively the sustainable development process as emphasised in the RIO-92 Conference.     

Ecophysiological indicators of the state of animal populations exposed to damaging factors

Indices of abundance and reproduction rate are considered in some groups of aquatic and terrestrial vertebrates from the zones of technogenic disasters. Upon a critical population decline caused by external destructive factors, such as emissions of acute ecotoxicants, the ecophysiological and behavioral compensatory mechanisms are activated, which provide for restoration of the total population size to the optimum within a short period of time. Environmental pollution with substances disturbing the reproductive function has the gravest consequences for animals. In this case, population size may remain fairly high, and, therefore, the effect of enhanced reproduction as a response to population decline does not take place, which eventually leads to a gradual but irreversible destruction of the population. Pathologies of reproduction should be used as a criterion for assessing the state of animals in the zones of technogenic disasters.Translated from Ekologiya, No. 1, 2005, pp. 32–38.Original Russian Text Copyright © 2005 by Shilova, Shatunovskii.     

Paleoecology and dynamics of forest ecosystems in Central Evenkia during the past 2400 years

New data on the composition of surface assemblages of plant macroremains from soil and swamp samples have been obtained in the study of geomorphologically different localities in the middle reaches of the Nizhnyaya Tunguska River. The results of paleocarpological analysis of forest soil sections supported by relevant palynological and geochronological data are presented. Natural changes of the forest cover over the past 2400 years and quantitative characteristics of the paleoclimate during each stage are described.Translated from Ekologiya, No. 1, 2005, pp. 3–10.Original Russian Text Copyright © 2005 by Koshkarova, Koshkarov.     

The effect of nitrogen deficiency,methionine and inhibitors of methionine metabolism on the DMSP contents of Tetraselmis subcordiformis (Stein)

The unicellular alga Tetraselmis (Platymonas) subcordiformis (Prasinophyceae) displayed a two-phase increase in DMSP (dimethylsulfoniopropionate) contents in response to nitrogen deficiency. In the first phase, DMSP pools increased by 75% within 24 h. The second increase in DMSP was observed after 14 d and was accompanied by cyst formation. Methionine metabolism was involved in DMSP accumulation. A 2.6-fold increase of the DMSP pool could be induced by supplementing a complete ASP (artifical seawater Provasoli) medium with 100 M L-methionine. Inhibition of methionine utilization by T. subcordiformis caused by the addition of S-adenosylhomocystein, a competitive inhibitor of S-adenosylmethionine-dependent transmethylases, resulted in a 24% increase of DMSP contents after 7 h. DMSP accumulation after hyperosmotic shock was significantly delayed when methionine liberation from proteins was inhibited by a set of protease inhibitors. A model for the mechanism of DMSP accumulation is presented on the basis of these data and additional information from the literature. It is proposed that methionine availability in T. subcordiformis determines the rate of DMSP synthesis.     

Analysing the sensitivity behaviour of two hydrology models

Recently, the New Morris Method has been presented as an effective sensitivity analysis tool for mathematical models. The New Morris Method estimates the sensitivity of an output parameter to a given set of input parameters (first-order effects) and the extent these parameters interact with each other (second-order effects). This method requires the specification of two parameters (runs and resolution) that control the sampling of the output parameter to determine its sensitivity to various inputs. The criteria for these parameters have been set on the analysis of a well-behaved analytical function (see Cropp and Braddock, Reliab. Eng. Syst. Saf. 78:77–83, 2002), which may not be applicable to other physical models that describe complex processes. This paper will investigate the appropriateness of the criteria from (Cropp and Braddock, 2002) and hence the effectiveness of the New Morris Method to determine the sensitivity behaviour of two hydrologic models: the Soil Erosion and Deposition System and Griffith University Representation of Urban Hydrology. In the first case, this paper will separately analyse the sensitivity of an output parameter on a set of input parameters (first- and second-order effects) for each model and discuss the physical meaning of these sensitivities. This will be followed by an investigation into the sampling criteria by exploring the convergence of the sensitivity behaviour for each model as the sampling of the parameter space is increased. By comparing these trends to the convergence behaviour from Cropp and Braddock (2002), we will determine how well the New Morris Method estimates the sensitivity for each model and whether the sampling criteria are appropriate for these models. It will be shown that the New Morris Method can provide additional insight into the functioning of these models, and that, under a different metric, the sensitivity behaviour of these models does converge confirming the sampling criteria set by Cropp and Braddock.     

Application of cryofocusing hydride generation and atomic fluorescence detection for dissolved mercury species determination in natural water samples

The concentration levels of mercury (Hg) species in natural water samples are usually low. Consequently, accurate analysis with low detection limits is still a major problem. In this work, a method was applied for the simultaneous direct determination of dissolved mercury species in water samples by on-line hydride generation (HG), cryogenic trapping (CT), gas chromatography (GC) and detection by atomic fluorescence spectrometry (AFS). The suitability of the method for real samples with different organic matter and chloride contents was evaluated by recovery experiments in synthetic and natural spiked water samples. The HG method was compared with other current available methods for mercury analysis with respect to the different fraction of mercury analysed, i.e. 'reactive', 'reducible' or total. HG derivatization and SnCl2 reduction (with and without previous oxidation with BrCl) were applied to synthetic and natural (spiked and non-spiked) water samples. The influence of chloride and dissolved organic matter concentrations was studied. The results suggest that the HG procedure is suitable for the simultaneous determination of Hg2+ and MeHg+ in surface water samples. Inorganic mercury analysed by HG (i.e. reducible) is close to the total inorganic mercury.     

High frequency monitoring of the coastal marine environment using the MAREL buoy

The MAREL Iroise data buoy provides physico-chemical measurements acquired in surface marine water in continuous and autonomous mode. The water is pumped 1.5 m from below the surface through a sampling pipe and flows through the measuring cell located in the floating structure. Technological innovations implemented inside the measuring cell atop the buoy allow a continuous cleaning of the sensor, while injection of chloride ions into the circuit prevents biological fouling. Specific sensors for temperature, salinity, oxygen and fluorescence investigated in this paper have been evaluated to guarantee measurement precision over a 3 month period. A bi-directional link under Internet TCP-IP protocols is used for data, alarms and remote-control transmissions with the land-based data centre. Herein, we present a 29 month record for 4 parameters measured using a MAREL buoy moored in a coastal environment (Iroise Sea, Brest, France). The accuracy of the data provided by the buoy is assessed by comparison with measurements of sea water weekly sampled at the same site as part of SOMLIT (Service d'Observation du Milieu LIToral), the French network for monitoring of the coastal environment. Some particular events (impact of intensive fresh water discharges, dynamics of a fast phytoplankton bloom) are also presented, demonstrating the worth of monitoring a highly variable environment with a high frequency continuous reliable system.     

Bioindicator organisms: Heavy metal pollution evaluation in the Ionian Sea (Mediterranean Sea—Italy)

Trace metal concentrations of mercury, cadmium, lead and chromium in Patella caerulea, and Mullus barbatus were investigated to provide information on pollution of Ionian Sea, since these metals have the highest toxic potential. High chromium levels (0.47–0.97 g g^–1 ww) were registered in limpet samples collected from two station near the Gulf of Taranto, while elevated concentration of mercury (0.31–1.50 g g^–1 ww) were found in mullet specimens from Sicily. The metal concentrations recorded at the clean stations may be considered as useful background levels to which to refer for comparison within the Mediterranean area. On the contrary, the high levels of chromium and mercury found respectively in the areas near the Gulf of Taranto and at Capo Passero being of concern in terms of environmental health need frequent monitoring.