Improving flammable mass estimation for vapor cloud explosion modeling in an offshore QRA

Presence of congestion and confinement in offshore modules due to limited availability of space make Vapor Cloud Explosions (VCEs) a significant contributor to risk. There are several methods available for quantifying the blast overpressure generated over distances and time. The approaches range from one-dimensional analysis using correlation models to 3-D analysis using Computational Fluid Dynamics (CFDs). The correlation models are easy to use and well-suited for assessing a number of credible VCE scenarios. However, the overpressure results predicted by correlation models depend on a good estimate of flammable mass. This paper proposes a method to improve the estimation of flammable mass. The UKOOA Ignition model developed by the Energy Institute London is used to estimate the flammable mass; and is modified to account for the effect of mitigation measures on release rate. A directional probability for wind is also added to the model. The proposed model takes into consideration the platform geometry and offshore conditions for each scenario, release location and direction, and wind direction. An offshore production platform with three deck levels is presented as an example case. The flammable mass is also computed using CFD and the results are compared to that of the proposed and the conventional methods. The results show that the flammable masses for selected scenarios are better estimated by the proposed method, being much lower than estimated by the conventional method, though larger than the CFD results. This paper presents an interim result of a project undertaken to improve QRA studies for VCE events.     

Leather Insole with Acupressure Effect: New Perspectives

Some wastes contain many reusable substances of high value. Solid leather waste is one such potential waste which can be converted into value added products. This study attempts to prepare leather insoles with acupressure effect from finished leather wastes and used leather wastes. Leather with acupressure effect (LAE) was fabricated using regenerated leather. LAE was characterized physico-chemically using Fourier transform infrared spectroscopy, thermo gravimetric analysis and scanning electron microscopy. Foot pressure measurements were done using LAE insoles on healthy individuals. Results proved that LAE insoles were able to increase the foot pressure of the wearer and thereby created an acupressure effect in them. Wearing of footwear with LAE insoles were beneficial compared to regular insoles. LAE possessed the required mechanical properties for insole production and it was also biodegradable in nature. The study proves that these composites could be successfully used for the production of cost-effective leather goods and therapeutic footwear. Production of useful byproducts from wastes is income generating and at the same time reduces environmental pollution and a feasible technology for waste recycling has been proved in this study.     

Food and feeding of Amphiesma stolatum (Linnaeus 1758)

The food and feeding behaviour of Amphiesma stolatum was studied. A total of 117 snakes were examined to analyse the diet composition. Ten live snakes were maintained in enclosure for evaluating the feeding habit, choice of food and rate of assimilation. The anurans constituted the major diet of the food spectrum. In captivity, fishes (fry), amphibians and reptiles were consumed by the snakes. A. stolatum exihibited Elaphe type of hunting behaviour. In most cases the snake struck the prey at its head. The assimilation rate with frog was highest.     

Dental fluorosis in bovine of Nayagarh district of Orissa

Chronic fluoride toxicity in the form of dental fluorosis was observed in cattle from nine (9) villages under two (2) blocks of Nayagarh district of Orissa. Out of 1117 cattle, 221 (18.09%) showed the signs of dental fluorosis. In all affected villages, the prevalence of dental fluorosis in calves (< 1 year age) was greater than adults. There was significant difference in prevalence in respect to age. The commonly observed signs of dental fluorosis were brown discoloration, mottling, attrition or uneven wearing of teeth with or without pitting. None of the affected animals showed characteristic signs of osteofluorosis. The mean serum and urine fluoride concentration of affected animals were significantly (P < 0.05) higher than those of control animals. Fluoride levels (mean) of ground water and surface water in two blocks were 1.30 +/- 0.16 ppm, 0. 66 +/- 0.08 ppm and 1.12 +/- 0.19 ppm, 0. 48 +/- 0.05 ppm respectively. The fluoride content of grass samples of affected and control (non-endemic) area was comparable. There was a highly positive correlation (r = + 0.664) between prevalence of dental fluorosis and fluoride content of ground water. It was concluded that fluoride intake through the water especially ground water contributed to the development of fluorosis in cattle.     

Use of Biotic Community Structure as a Measure of Ecological Degradation

The benthic macroinvertebrate communities of two lotic aquatic habitats,namely,the Churni River(C-R)and the Jalangi River(J-R)were compared in this study.One lotic aquatic system(C-R)was polluted by organic pollutants due to discharge of unprocessed sewage water,while the other(J-R)was not affected by such pollution.Evaluations of various physico-chemical properties of water,sediment and different macroinvertebrate communities of the two tropical lotic systems were done in a period from January,2002 to December,2003.A long term temporal change in the macroinvertebrate communities was recorded due to increase in sediment rH value.Sediment redox potential affected by the anthropogenic activities was found to be an important factor for alteration of macroinvertebrate communities in these aquatic ecosystems.A positive correlation has been established between rH and Margalef index in this study.Potassium and the total count of coliform bacteria in water showed significantly higher values for the polluted Churni River than those for the Jalangi River.Fig 3,Tab 4,Ref 34     

Effects of chromium and nickel on germination and growth in tolerant and non-tolerant populations of Echinochloa colona (L.) Link

The tolerance of populations of a grass, Echinochloa colona, growing abundantly on chromite minewaste dumps, was tested in two separate experiments. Seed-based experiments indicate that the populations growing naturally on uncontaminated sites, germinated better in nutrient solutions without metal than those collected from minewaste dumps. Metal tolerance indices were greater in the plant populations derived from metal contaminated sites and better growth of these plants was noted on mine spoil soil-mix in the ratio of 1:1; the percentage of seed germination and the rate of seedling growth, however, declined in a soil compost containing 25% mine spoil and 75% uncontaminated (control) soil. Populations of Echinochloa colona occurring naturally on chromite mine spoils, therefore, appear to have developed metal tolerance. It is maintained by a balanced and stable genetic system built up and adjusted by natural selection. Such material is very suitable to be used in restoration work designed to produce an effective vegetation cover to improve the derelict land and to reduce erosion. This finding might be useful in revegetation programmes on metalliferous minewastes.     

A classification tree based modeling approach for segment related crashes on multilane highways

Introduction

This study presents a classification tree based alternative to crash frequency analysis for analyzing crashes on mid-block segments of multilane arterials.

Method

The traditional approach of modeling counts of crashes that occur over a period of time works well for intersection crashes where each intersection itself provides a well-defined unit over which to aggregate the crash data. However, in the case of mid-block segments the crash frequency based approach requires segmentation of the arterial corridor into segments of arbitrary lengths. In this study we have used random samples of time, day of week, and location (i.e., milepost) combinations and compared them with the sample of crashes from the same arterial corridor. For crash and non-crash cases, geometric design/roadside and traffic characteristics were derived based on their milepost locations. The variables used in the analysis are non-event specific and therefore more relevant for roadway safety feature improvement programs. First classification tree model is a model comparing all crashes with the non-crash data and then four groups of crashes (rear-end, lane-change related, pedestrian, and single-vehicle/off-road crashes) are separately compared to the non-crash cases. The classification tree models provide a list of significant variables as well as a measure to classify crash from non-crash cases. ADT along with time of day/day of week are significantly related to all crash types with different groups of crashes being more likely to occur at different times.

Conclusions

From the classification performance of different models it was apparent that using non-event specific information may not be suitable for single vehicle/off-road crashes.

Impact on Industry

The study provides the safety analysis community an additional tool to assess safety without having to aggregate the corridor crash data over arbitrary segment lengths.     

Concept of optimum basin thickness in heat exchanger–assisted solar stills

Environmental Science and Pollution Research - It is suggested by many works on solar stills that water thickness should be kept as low as possible to reduce its thermal inertia and obtain best...