Polycyclic aromatic hydrocarbons (PAHs) in atmospheric urban area: monitoring on various types of sites

The air quality over the Toulouse urban area (France) is recorded daily by the regional "Midi-Pyrénées" atmospheric pollution measurements network (ORAMIP). Relevant data is collected from about 100 analysers spread over more than thirty stations. The regulations covering major indicators of atmospheric pollution (ozone, nitrogen dioxide, sulphur dioxide) have been updated in recent years to include additional compounds like polycyclic aromatic hydrocarbons (PAHs). The ORAMIP, in partnership with the ENSIACET has undertaken background PAH average concentration measurements over the urban agglomeration of Toulouse during spring 2006 for various types of sites (traffic, urban, industrial). The sampling was performed using a low volume air sampler equipped with quartz fiber filters and polyurethane foams For the two urban sites, total atmospheric concentrations between 12 and 20 ng/m(3) have been obtained, whereas for the industrial site the values averaged 22 ng/m(3). In addition, and regardless of site, the average concentrations of benzo[a]pyrene, at present the only regulated PAH, were always less than the 1 ng/m(3) limit.     

Ammonia emissions from field-simulated cattle defecation and urination

Atmospheric ammonia (NH(3)) is a concern because of its environmental impact. The greatest contribution to atmospheric NH(3) comes from agricultural sources. This study quantified NH(3) volatilization from cattle defecation and urination on pasture under field conditions in Auburn, Alabama. Treatments consisted of beef feces, dairy feces, dairy urine, and a control. The experiment was conducted during four seasons from June 2003 to April 2004. Fresh feces or urine was applied onto grass swards, and NH(3) volatilization was measured up to 14 d after application using an inverted chamber method. Dairy urine was the only significant source of NH(3). Ammonia nitrogen (N) loss differed among seasons, ranging from 1.8% in winter to 20.9% during the warmer summer months. Cumulative volatilization was best described in this experiment by the equation % NH(3)-N loss = N(max) (1 - e(-ct))(i). The highest rate of NH(3) volatilization generally occurred within 24 h. This study suggests that NH(3) volatilization from cattle urine on pasture is significant and varies with season, whereas NH(3) volatilization from cattle feces is negligible.     

A SURVEY OF THE MICROBIAL QUALITY OF RECYCLED HOUSEHOLD GRAYWATER1

ABSTRACT: In arid regions where populations are expanding and water is scarce, people are searching for ways to conserve and reuse water. One way homeowners can conserve water is by recycling graywater‐wastewater from household sinks, showers, bathtubs, and washing machines. Graywater is used mostly for landscape irrigation. Since graywater is wastewater, reusing it raises concerns about disease transmission, either by contact with the water or the irrigated soil. The purpose of this study was to assess how factors such as number and age of household occupants, types of graywater storage, and sources of graywater used affect the microbial quality of graywater and soil irrigated with graywater. Samples were collected over twelve months from eleven Tucson, Arizona households recycling graywater. Samples of graywater, soil irrigated by graywater, and soil irrigated by potable water were collected. We found that graywater irrigation causes a statistically significant increase in levels of fecal coliforms in soil when compared to soil irrigated with potable water. Graywater from the kitchen sink significantly increases levels of these bacteria in water and soil. Children also cause a statistically significant increase in fecal coliform levels in graywater and soil, possibly introducing a small amount of additional risk in graywater reuse.     

A comparison of taxon co-occurrence patterns for macro- and microorganisms

We examine co-occurrence patterns of microorganisms to evaluate community assembly "rules". We use methods previously applied to macroorganisms, both to evaluate their applicability to microorganisms and to allow comparison of co-occurrence patterns observed in microorganisms to those found in macroorganisms. We use a null model analysis of 124 incidence matrices from microbial communities, including bacteria, archaea, fungi, and algae, and we compare these results to previously published findings from a meta-analysis of almost 100 macroorganism data sets. We show that assemblages of microorganisms demonstrate nonrandom patterns of co-occurrence that are broadly similar to those found in assemblages of macroorganisms. These results suggest that some taxon co-occurrence patterns may be general characteristics of communities of organisms from all domains of life. We also find that co-occurrence in microbial communities does not vary among taxonomic groups or habitat types. However, we find that the degree of co-occurrence does vary among studies that use different methods to survey microbial communities. Finally, we discuss the potential effects of the undersampling of microbial communities on our results, as well as processes that may contribute to nonrandom patterns of co-occurrence in both macrobial and microbial communities such as competition, habitat filtering, historical effects, and neutral processes.     

New genetic markers to identify European resistant abalone to vibriosis revealed by high-resolution melting analysis,a sensitive and fast approach

Increasing temperature of seawater is often associated with increased exposure incidence of disease in field and in aquaculture populations. Numerous episodic mass mortalities of the abalone Haliotis tuberculata have been observed along the northern Brittany coast of France caused by a complex interaction between the host, pathogen and environmental factors. Here, we evaluated the potential of high-resolution melting (HRM) analysis for mutation genotyping and development of genetic markers for resistance to vibriosis in the gastropod species H. tuberculata. Small amplicon assays were developed and revealed genetic polymorphism between surviving and susceptible abalone obtained after two successive infections of aquaculture families in controlled conditions. Together with specific COI haplotypes, we identified particular genotypes in nascent polypeptide-associated complex subunit alpha and ferritin genes linked to the susceptibility or resistance of abalone to vibriosis. Selection of genitors based on these genes may increase the proportion in offspring of resistant individuals of more than 76 %. Finally, HRM assays constitute a very efficient genotyping tool to validate the genetic markers on a representative number of individuals of wild populations and thus identify future resistant genitors for aquaculture or conservation purposes.     

Methodology to Assess Silicone (Bio)Degradation and its Effects on Microbial Diversity

The behavior of silicone elastomers in landfills has not been well studied. Their impact on the environment is not known and, consequently, it has not been possible to establish robust Life Cycle Assessments of these materials. In the first part of this study, a methodology for assessing silicone degradation pathways is described. The chemical and biological parameters were considered separately. Firstly, parameters such as pH, redox potential and cation concentration were monitored and then degradation in aerobic and anaerobic conditions was investigated. Any impacts on microbial diversity were also taken into account, using bio-molecular tools. In the second part, a case study on the degradation of Room Temperature Vulcanizable silicone elastomers was performed to validate this methodology. The results indicate that condensation catalysts play a key role at their end-of-life, in both chemical and biological degradation. Moreover, these compounds have a significant effect on microbial communities (similarities with blank samples <5?%). As a consequence, the choice of catalyst should be carefully considered to assess any environmental impacts.     

Microwave/SPME method to quantify pesticide residues in tomato fruits

A new analytical method using focused microwave-assisted extraction (FMAE), coupled with solid phase micro-extraction (SPME), has been elaborated to determine 25 pesticides used in tomato cultivation. Microwave energy was used for a fast and controlled heating of solvent to selectively extract compounds. Calibration curves were plotted from blank tomato samples spiked at different concentrations with standards. A linear response was obtained between 10 and 1000 μ g/Kg for pyrethroids and between 0.1 and 5000 μ g/Kg for other compounds. For all studied substances, the resulting correlation coefficient (r²) was greater than 0.99. Limits of detection (LOD) and quantification (LOQ) were measured lower than 8 and 25 μ g/Kg, respectively. The relative standard deviation (RSD) was determined below 15% for all pesticides. Field incurred tomato samples were used to validate the new FMAE/SPME method. Observed analysis results by using this technique were in good agreement compared to those obtained by two accredited trading laboratories using traditional methods. Four tomato samples, bought in a local market, were also tested with the FMAE/SPME method.     

Dynamic extreme values modeling and monitoring by means of sea shores water quality biomarkers and valvometry

Water quality can be evaluated using biomarkers such as tissular enzymatic activities of endemic species. Measurement of molluscs bivalves activity at high frequency (e.g., valvometry) during a long time period is another way to record the animal behavior and to evaluate perturbations of the water quality in real time. As the pollution affects the activity of oysters, we consider the valves opening and closing velocities to monitor the water quality assessment. We propose to model the huge volume of velocity data collected in the framework of valvometry using a new nonparametric extreme values statistical model. The objective is to estimate the tail probabilities and the extreme quantiles of the distribution of valve closing velocity. The tail of the distribution function of valve closing velocity is modeled by a Pareto distribution with parameter ??_t,τ, beyond a threshold τ according to the time t of the experiment. Our modeling approach reveals the dependence between the specific activity of two enzymatic biomarkers (Glutathione-S-transferase and acetylcholinesterase) and the continuous recording of oyster valve velocity, proving the suitability of this tool for water quality assessment. Thus, valvometry allows in real-time in situ analysis of the bivalves behavior and appears as an effective early warning tool in ecological risk assessment and marine environment monitoring.     

Removal of sorbed polycyclic aromatic hydrocarbons from soil, sludge and sediment samples using the Fenton's reagent process

The use of the Fenton's reagent process has been investigated for the remediation of environmental matrices contaminated by polycyclic aromatic hydrocarbons (PAHs). Laboratory experiments were first conducted in aqueous solutions, to study the kinetics of oxidation and adsorption of PAHs. Benzo[a]pyrene was more rapidly degraded than adsorbed, while only partial oxidation of fluoranthene occurred. In the case of benzo[b]fluoranthene, its adsorption prevented its oxidation. Besides competition effects between PAHs were found, with slower oxidation of mixtures as compared to single PAH solutions. Apparition of some by-products was observed, and a di-hydroxylated derivative of benzo[a]pyrene could be identified under our conditions. Consequently, application to solid environmental matrices (soil, sludge and sediment samples) was performed using large amounts of reagents. The efficiency of the Fenton treatment was dependent on the matrix characteristics (such as its organic carbon content) and the PAH availability (correlated to the date and level of contamination). However, no pH adjustment was required, as well as no iron addition due to the presence of iron oxides in the solid matrices, suggesting the potential application of Fenton-like treatment for the remediation of PAH-contaminated environmental solids.