Statistical comparison and correlation of zinc and lead in estuarine sediments along the western coast of Mauritius

Cr, Zn and Pb were quantified using atomic absorption spectrometry (AAS) from urban and rural estuarine sediments collected along the western coast of Mauritius during the period July 2002-January 2003. The mean concentration of Cr (225.4 mg kg(-1)), Zn (107.0 mg kg(-1)) and Pb (27.0 mg kg(-1)) in sediments along the six estuaries can be considered below those from contaminated estuarine sediments. Zn and Pb were significantly higher in urban sediments downstream St. Louis River compared to a rural estuary at Tamarin at 5% significance level. Zn was also significantly lower in Tamarin compared to Petite Riviere Noire estuary. Cr was however not significantly different in sediments from the six estuaries and could be considered of basaltic origin and were correlated to neither lead nor zinc. The concentration of Zn and Pb were greatest in the more urbanised upper and lower reaches of the St. Louis estuary during the period of study and were also significantly positively correlated in the estuarine sediments indicating that the cycling of Pb and Zn were linked indicating a common source for Pb and Zn. The potential sources of Pb and Zn in the urban estuarine sediments were considered to arise from road runoff causing significant quantities to be trapped. At present, compared to contaminant levels found in the UK and elsewhere, Mauritius still looks relatively uncontaminated but there is growing concern about heavy metal contamination in urban estuaries. There is therefore a need for long-term studies in estuarine management to involve integrated strategies in which water-sediment interactions in estuaries need to be considered and international standards for sediment quality developed. Such studies undertaken in the future would further the understanding of the biogeochemical processes of estuarine systems in Mauritius which could then be used in environmental development schemes and effective coastal zone management.     

Thallium: a review of public health and environmental concerns

Thallium (Tl) is a rare but widely dispersed element. All forms of thallium are soluble enough to be toxic to living organisms. Thallium is more toxic to humans than mercury, cadmium, lead, copper or zinc and has been responsible for many accidental, occupational, deliberate, and therapeutic poisonings since its discovery in 1861. Its chemical behavior resembles the heavy metals (lead, gold and silver) on the one hand and the alkali metals (K, Rb, Cs) on the other. It occurs almost exclusively in natural waters as monovalent thallous cation. The solubility of thallous compounds is relatively high so that monovalent thallium is readily transported through aqueous routes into the environment. Tl can be transferred from soils to crops readily and accrues in food crops. The fascinating chemistry and high toxicity potential make thallium and its compounds of particular scientific interest and environmental concern. Thallium was detected in base-metal mining effluents. The conventional removal of heavy metals from wastewater has little effect on thallium. In this review, various treatment options and removal technologies are enumerated in order to protect the environment from thallium toxicity.     

Preparation of gasification feedstock from leafy biomass

Dried leaves are a potential source of energy although these are not commonly used beside to satisfy daily energy demands in rural areas. This paper aims at preparing a leafy biomass feedstock in the form of briquettes which can be directly used for combustion or to extract the combustible gas using a gasifier. Teak (Tectona grandis) and rubber (Hevea brasiliensis) leaves are considered for the present study. A binder-assisted briquetting technique with tapioca starch as binder is adopted. Properties of these leafy biomass briquettes such as moisture content, calorific value, compressive strength, and shatter index are determined. From the study, briquettes with biomass-to-binder ratio of 3:5 are found to be stable. Higher mass percentage of binder is considered for preparation of briquettes due to the fact that leafy biomasses do not adhere well on densification with lower binder content. Ultimate analysis test is conducted to analyze the gasification potential of the briquettes. Results show that the leafy biomass prepared from teak and rubber leaves has calorific values of 17.5 and 17.8 MJ/kg, respectively, which are comparable with those of existing biomass feedstock made of sawdust, rice husk, and rice straw.     

Evaluation of the efficacy of a portable LIBS system for detection of CWA on surfaces

Laser-induced breakdown spectroscopy (LIBS) is a laser-based optical technique particularly suited for in situ surface analysis. A portable LIBS instrument was tested to detect surface chemical contamination by chemical warfare agents (CWAs). Test of detection of surface contamination was carried out in a toxlab facility with four CWAs, sarin (GB), lewisite (L1), mustard gas (HD), and VX, which were deposited on different substrates, wood, concrete, military green paint, gloves, and ceramic. The CWAs were detected by means of the detection of atomic markers (As, P, F, Cl, and S). The LIBS instrument can give a direct response in terms of detection thanks to an integrated interface for non-expert users or so called end-users. We have evaluated the capability of automatic detection of the selected CWAs. The sensitivity of our portable LIBS instrument was confirmed for the detection of a CWA at surface concentrations above 15 μg/cm². The simultaneous detection of two markers may lead to a decrease of the number of false positive.     

Constructed wetlands may lower inorganic nutrient inputs but enhance DOC loadings into a drinking water reservoir in North Wales

Environmental Science and Pollution Research - The objective of this study was to monitor a newly constructed wetland (CW) in north Wales, UK, to assess whether it contributes to an improvement in...     

Identifying and modeling key trade-offs between hydrogen fuel cell and electric vehicles

Through a sensitivity analysis, the trade-off between vehicle range and CO₂ emissions is investigated as a function of electric emissions coefficient. Various powertrains were analysed for use in a small crossover sport utility vehicle. Gasoline, gasoline electric hybrid, diesel, fuel cell and battery electric vehicles (BEVs) were considered. Using various upstream fuel pathways and a model for vehicle performance, emissions and energy use were estimated. The hydrogen fuel cell vehicle was found preferable to BEVs under conditions of high CO₂ emissions per kW-hr and a high vehicle range requirement. The BEV was preferable for all other conditions.     

Common buzzards (Buteo buteo) bio-indicators of heavy metals pollution in Sicily (Italy)

The aim of this study was to evaluate the accumulation of toxic (As, Cd and Pb) and essential (Cu, Mn and Zn) metals in samples (feathers, liver, kidney, lung, intestine and muscle) of common buzzards (Buteo buteo) from Sicily, used as bio-indicators for monitoring environmental metals pollution. All samples of buzzards were collected at the “Recovery Center of Wild Fauna” of Palermo, through the Zooprophilactic Institute. The quantitative determinations of metals were carried out using an atomic absorbtion spectrophotometer (AAS). The results obtained showed the presence of metals in all samples analyzed. For toxic metals the highest levels of Pb and As were found in liver and those of Cd in kidney; for essential metals Zn levels were higher than Cu and Mn in all tissues analyzed. Significant differences are observed in metal levels between female and male and juvenile and adult bird samples.Highest metal levels found in liver, kidney and muscle can be considered indicative of chronic exposure to metals while the presence of metals in feathers can be consequential to storing and elimination processes. The results obtained suggest that common buzzards (Buteo buteo) may be very useful as bio-indicators for monitoring environmental pollution.     

The development of effects-based air quality management regimes

This paper considers the evolution of attempts to control and manage air pollution, principally but not exclusively focussing upon the challenge of managing air pollution in urban environments. The development and implementation of a range of air pollution control measures are considered. Initially the measures implemented primarily addressed point sources, a small number of fuel types and a limited number of pollutants. The adequacy of such a source-control approach is assessed within the context of a changing and challenging air pollution climate. An assessment of air quality management in the United Kingdom over a 50-year timeframe exemplifies the range of issues and challenges in contemporary air quality management. The need for new approaches is explored and the development and implementation of an effects-based, risk management system for air quality regulation is evaluated.