A systematic review on iron-based nanoparticle-mediated clean-up of textile dyes: challenges and prospects of scale-up technologies

Environmental Science and Pollution Research - The projected increase of the global textile industry to USD1002.84 billion in 2027 indicates a simultaneous increase in water pollution due to...     

Sustainable technologies for on-site domestic wastewater treatment: a review with technical approach

Environment, Development and Sustainability - The rapid population growth has rendered the centralized sewerage systems a non-realistic option in sparsely populated areas, particularly in...     

Dissipation behavior of propargite--an acaricide residues in soil, apple (Malus pumila) and tea (Camellia sinensis)

Propargite, recently introduced in India, is an effective acaricide on a large number of crops most of which are consumed by human beings directly or after processing. Therefore, it has become important to check the dissipation behavior of propargite in edible raw commodities, processed products and in the environment. In the present study, dissipation of residue of this acaricide in soil, apple fruit and tea (green tea leaves, manufactured tea, infusion and spent leaves) was studied. Analysis was carried out using high performance-liquid chromatography with UV detection system. The dissipation rate was found to vary with the nature of studied crop/sample. In soil, half-life ranged from 43 to 45 days, while in plant matrices (tea and apple) it ranged 1.66-2.61 days. The percent transfer of propargite residue from manufactured tea to infusion was 23.60-40.00; however, 35.71-53.20% of the residues remained stuck to the spent leaves.     

Effect of different design aspects of pipe for earth air tunnel heat exchanger system: A state of art

Earth air tunnel heat exchanger (EATHE) is a promising passive technique to provide thermal comfort condition in buildings. EATHE system uses undisturbed temperature of the ground for heating/cooling of air. Despite the several advantages, this technique has not become much popular owing to its high capital cost (mainly pipe cost and trench excavation cost) and large land area requirements. The primary objective of this study is to present a comprehensive review of different EATHE pipe layouts, pipe properties and positioning of the pipe with their advantages and limitations. It is observed that the ring pipe layout is the most cost-effective pipe-layout for small size EATHE system because it saves excavation cost by using a trench of the existing foundation of the building. However, Grid pipe-layout is an ideal layout for a large size EATHE system. Multi-layer pipe layouts should be used to reduce the land area requirement significantly. Moreover, EATHE system can be installed beneath the building (under building foot-print) to eliminate extra land area requirement for the installation of EATHE system. This review article shows that the Initial capital cost and land area requirement for the EATHE system can be substantially reduced by using appropriate pipe layout. It can be concluded that if EATHE system is installed with proper design strategies, it will be a clean and cost-effective method for building heating/cooling with significant power savings.     

Gender response and safe carrying load limit for sugar industry workers

This study investigates the safe carrying load limit in relation to gender of workers in the sugar industry. A total of 632 workers (male and female) were interviewed following a physiological and psycho-physiological methodology. All of these workers were in the age groups of 21–30, 31–40 and ≥41 years. In this study, for the physiological methodology, both field and laboratory data were collected, which included heart rate, heart rate variability, energy expenditure and maximum rate of oxygen consumption. Information regarding hemoglobin content, weight, age, lean body weight, etc., was recorded to know the physical health of the workers. In the psycho-physiological evaluation, load-carrying limits were determined by the psychophysical rating of the load by workers from the selected age groups. By considering the physiological stresses and psycho-physiological evaluation, the safe carrying load limit was determined in head and back mode for male and female workers as per their age groups.     

Non-powered hand tool improvement research for prevention of work-related problems: a review

Purpose. In lower-middle-income countries, most of the work is performed manually using non-ergonomic hand tools which results in work-related health problems. Using hand tools designed in line with ergonomic principles may play an important role in reducing work-related health concerns significantly. Methods. Scientific databases (PubMed, EBSCOhost) and e-publishers were searched for articles from 1985 to 2015 using the following keywords: ‘hand tool’, ‘ergonomics’, ‘usability’ and ‘design’. After applying selection criteria to 614 articles, 58 articles related to the physical design of hand tools were selected. Results. Seventeen articles were related to hand tool improvement in the manufacturing sector. Musculoskeletal disorders were found to be the most frequently occurring work-related health problems. Most of the articles focused on product and qualitative variables for improvement in hand tools, while few articles considered human and task variables. Conclusions. Literature shows that hand tool improvement studies have been given less importance in low-income and lower-middle-income countries. However, some work of significance is reported in the agriculture sectors of these countries. Hence, it is concluded that ergonomic intervention in hand tools is much needed for those industries which employ traditional methods of working.     

Assessment of habitat quality with relation to fish assemblages in an impacted river of the Ganges basin, northern India

In this work, we examined water-quality assessment in relation to fish assemblage of Gomti River, a large tributary of the Ganges River basin in northern India. Principal component analysis was performed for 18 environmental variables which produced three axes that cumulatively explained 60.23% of the environmental variation in sites. Fifteen variables (fine substrate fine gravel, coarse gravel, cobble, sand substrate water flow, conductivity, TDS, total hardness, temperature, dissolved oxygen, pH, and overhanging vegetation) had high loadings on at least one of the principal component axes interpreted. The canonical correspondence analysis was used to establish the relationship between important fish species and environmental variables. Species were distributed within four groups with respect to the significant habitat characteristics. The Pearson correlation coefficient was calculated between the water-quality parameters. We concluded that the level of species richness is mostly dependent on abiotic factors like temperature, dissolved oxygen, TDS, conductivity, depth, pH, and water current in the Gomti River, of the Ganges basin.     

Environmental repercussions of cane-sugar industries on the Chhoti Gandak river basin, Ganga Plain, India

Chhoti Gandak river basin, situated in the Ganga Plain, is one of India’s most productive cane-sugar industrial belts. Soil and groundwater samples were collected to investigate the impacts of these industries on the environment of the Chhoti Gandak river basin with special reference to soil and water. The results show that concentration of most metals are affected by industrial activities and surrounding agricultural practices. It is evidenced by increased heavy metal concentration in the soils as well as in the aquifers. Metals such as Pb, Cu, and Zn in the soil around the industrial sets are found significantly higher than their normal values in the soil. Metals like Fe and Mn in the groundwater are more than the permissible limit prescribed by the World Health Organization. In this study, an attempt was made to distinguish between the naturally occurring and anthropogenically induced metals in the soil. Analysis of geochemical properties, disposal of industrial wastes, inadequate application of agrochemicals, and their impact on environment indicate the sustainable implementation of integrated wastewater management plan in these industrial sets and also in similar situations.     

Mapping of fluoride endemic area and assessment of F−1 accumulation in soil and vegetation

The prevalence of fluorosis is mainly due to the consumption of more fluoride (F^?1) through drinking water, vegetables, and crops. The objective of the study was mapping of F^?1 endemic area of Newai Tehsil, Tonk district, Rajasthan, India. For the present study, water, soil (0–45 cm), and vegetation samples were collected from 17 villages. Fluoride concentration in water samples ranged from 0.3 to 9.8 mg/l. Out of 17 villages studied, the amounts of F^?1 content of eight villages were found to exceed the permissible limits. Labile F^?1 content and total F^?1 content in soil samples ranges 11.00–70.05 mg/l and 50.3–179.63 μg g^?1, respectively. F^?1 content in tree species was found in this order Azadirachta indica 47.32–55.76 μg g^?1 > Prosopis juliflora 40.16–49.63 μg g^?1 > Acacia tortilis 34.39–43.60 μg g^?1. While in case of leafy vegetables, F^?1 content order was Chenopodium album 54.23–98.42 μg g^?1 > Spinacea oleracea 30.41–64.09 μg g^?1 > Mentha arvensis 35.48–51.97 μg g^?1. The order of F^?1 content in crops was found as 41.04 μg g^?1 Pennisetum glaucum > 13.61 μg g^?1 Brassica juncea > 7.98 μg g^?1 Triticum sativum in Krishi Vigyan Kendra (KVK) farms. Among vegetation, the leafy vegetables have more F^?1 content. From the results, it is suggested that the people of KVK farms should avoid the use of highly F^?1 containing water for irrigation and drinking purpose. It has been recommended to the government authority to take serious steps to supply drinking water with low F^?1 concentration for the fluorosis affected villages. Further, grow more F^?1 hyperaccumulator plants in F^?1 endemic areas to lower the F^?1 content of the soils.