Environmental Impacts of a Secondary Lead Smelter in Landskrona, Southern Sweden

Scandinavia has one secondary lead smelter that recycles lead from approximately 85% of used car batteries in Scandinavia and which has been active since the 1940s. The smelter, situated in Landskrona, has undergone a comprehensive clean up programme during the last decade, during which time production has doubled, while at the same time discharges of dust and lead to the atmosphere have decreased.Top and depth soil samples were taken on a 0.5km×0.5Km grid throughout the city of Landskrona, which covers an area of approximately 15km². Samples were analysed by ICPAES for a number of elements including Pb, Zn, Cu, Cd, As, Sb and Hg. Road dust samples from selected sites were collected and similarly analysed. Blood samples were taken from 37 volunteer schoolchildren (aged 8–11) from two schools in Landskrona. House dust samples were taken from each child's home. Soil samples were taken from homes which had gardens, public and school play areas. Elevated heavy metal concentrations were found in close proximity to the secondary lead smelter, and this soil enrichment influences the whole of the town, modified to some extent by the prevailing wind. The smelter does not influence the soil lead concentration at distances greater than 3.5km, where the soil reflects the background value for the area.Road dust samples also show decreases in lead concentrations with distance from the smelter. The average level of lead in house dust was considerably lower than that found in Birmingham, UK. Blood lead levels in the child population ranged from 1.5–5.1gdl^–1, with a mean of 3.05gdl^–1, showing a distinct decrease from those measured in 1978–82. No significant difference in blood lead concentrations with distance of the home from the smelter, nor between attenders at the two schools was revealed in the limited number of children studied.     

SOIL CHANGES CAUSED BY MUNICIPAL WASTEWATER APPLICATIONS IN EASTERN SOUTH DAKOTA1

ABSTRACT: Wastewater from a municipal treatment plant was applied in rapid infiltration basins for four years to determine a poorly drained soils effectiveness in removing influent N and P and the soil changes that might limit their removal. About half the total PO₄-P lost from the influent was sorbed in the upper 91 cm of the soil and the other half was sorbed by the soil below the perforated pipe, which was used to drain the basins and collect the effluent for analysis. Drying of the basin soils converted more sorbed PO₄-P to Ca phosphates but the total sorbed was about the same. The in. fluent N decreased, probably by volatilization, because the two basins with surface soil lost soil N rather than gained soil N. The soil total Ca, Mg, and K contents did not change significantly but Na increased slightly. Changes in the physical characteristics of the soils were slight and would have little effect on the longevity of a rapid infiltration basin.     

The influence of degree of substitution on blend miscibility and biodegradation of cellulose acetate blends

In this account, we report our findings on blends of cellulose acetate having a degree of substitution (DS) of 2.49 (CA2.5) with a cellulose acetate having a DS of 2.06 (CA2.0). This blend system was examined over the composition range of 0–100% CA2.0 employing both solvent casting of films (no plasticizer) and thermal processing (melt-compressed films and injection molding) using poly(ethylene glycol) as a common plasticizer. All thermally processed blends were optically clear and showed no loss in optical quality after storage for several months. Thermal analysis and measurement of physical properties indicate that blends in the middle composition range are partially miscible, while those at the ends of the composition range are miscible. We suggest that the miscibility of these cellulose acetate blends is influenced primarily by the monomer composition of the copolymers. Bench-scale simulated municipal composting confirmed the biodestructability of these blends and indicated that incorporation of a plasticizer accelerated the composting rates of the blends.In vitro aerobic biodegradation testing involving radiochemical labeling conclusively demonstrated that both the lower DS CA2.0 and the plasticizer significantly enhanced the biodegradation of the more highly substituted CA2.5.While this work was in progress, Robert Gardner was struck with cancer and died on June 6, 1995. This paper is dedicated to his memory and to his contributions as a friend and colleague.     

Using single- and multi-target regression trees and ensembles to model a compound index of vegetation condition

An important consideration in conservation and biodiversity planning is an appreciation of the condition or integrity of ecosystems. In this study, we have applied various machine learning methods to the problem of predicting the condition or quality of the remnant indigenous vegetation across an extensive area of south-eastern Australia—the state of Victoria. The field data were obtained using the ‘habitat hectares’ approach. This rapid assessment technique produces multiple scores that describe the condition of various attributes of the vegetation at a given site. Multiple sites were assessed and subsequently circumscribed with GIS and remote-sensed data.     

Seat strength in rear body block tests

Purpose: This study collected and analyzed available testing of motor vehicle seat strength in rearward loading by a body block simulating the torso of an occupant. The data were grouped by single recliner, dual recliner, and all belts to seat (ABTS) seats.

Methods: The strength of seats to rearward loading has been evaluated with body block testing from 1964 to 2008. The database of available tests includes 217 single recliner, 65 dual recliner, and 18 ABTS seats. The trends in seat strength were determined by linear regression and differences between seat types were evaluated by Student's t-test. The average peak moment and force supported by the seat was determined by decade of vehicle model year (MY).

Results: Single recliner seats were used in motor vehicles in the 1960s to 1970s. The average strength was 918 ± 224 Nm (n = 26) in the 1960s and 1,069 ± 293 Nm (n = 65) in the 1980s. There has been a gradual increase in strength over time. Dual recliner seats started to phase into vehicles in the late 1980s. By the 2000s, the average strength of single recliner seats increased to 1,501 ± 335 Nm (n = 14) and dual recliner seats to 2,302 ± 699 Nm (n = 26). Dual recliner seats are significantly stronger than single recliner seats for each decade of comparison (P < .001). The average strength of ABTS seats was 4,395 ± 1,185 in-lb for 1989–2004 MY seats (n = 18). ABTS seats are significantly stronger than single or dual recliner seats (P < .001). The trend in ABTS strength is decreasing with time and converging toward that of dual recliner seats.

Conclusions: Body block testing is an quantitative means of evaluating the strength of seats for occupant loading in rear impacts. There has been an increase in conventional seat strength over the past 50 years. By the 2000s, most seats are 1,700–3,400 Nm moment strength. However, the safety of a seat is more complex than its strength and depends on many other factors.     

Signs that encourage internalized recycling: Clinical validation, weak messages and “creative elaboration”

Two experiments examined clinical validation's ability to increase examination of a persuasive message and increase long-term recycling. In Experiment 1, validating (acknowledging) recycling's inconvenience decreased criticism of the persuasive message, supporting validation's ability to reduce reactance and open the reader to new ideas. Validation did not improve attitudes towards the sign's author, removing liking for the communicator as an alternate explanation for attitude change. In Experiment 2, different recycling signs were created from a 2(no validation/validation) by 2(weak/strong arguments) factorial design, and placed in university buildings. The validation weak sign increased recycling more than the validation strong sign, especially after the signs were removed. We suggest that validation induced people to scrutinize the weak message and use their existing pro-recycling attitudes to “creatively elaborate” it. Discussion emphasizes clinical validation and the Elaboration Likelihood Model as theoretical tools, as well as the potential for thought provoking signs to have long-term effects.     

Transport of fecal bacteria by boots and vehicle tires in a rural Alaskan community

People living without piped water and sewer can be at increased risk for diseases transmitted via the fecal-oral route. One rural Alaskan community that relies on hauling water into homes and sewage from homes was studied to determine the pathways of fecal contamination of drinking water and the human environment so that barriers can be established to protect health. Samples were tested for the fecal indicator, Escherichia coli, and the less specific indicator group, total coliforms. Shoes transported fecal contamination from outside to floor material inside buildings. Contamination in puddles on the road, in conjunction with contamination found on all-terrain vehicle (ATV) tires, supports vehicle traffic as a mechanism for transporting contamination from the dumpsite or other source areas to the rest of the community. The abundance of fecal bacteria transported around the community on shoes and ATV tires suggests that centralized measures for waste disposal as well as shoe removal in buildings could improve sanitation and health in the community.     

Development of a Quantitative Pasture Phosphorus Management Tool Using the SWAT Model1

Abstract: Assessment tools to evaluate phosphorus loss from agricultural lands allow conservation planners to evaluate the impact of management decisions on water quality. Available tools to predict phosphorus loss from agricultural fields are either: (1) qualitative indices with limited applicability to address offsite water quality standards, or (2) models which are prohibitively complex for application by most conservation planners. The purpose of this research was to develop a simple interface for a comprehensive hydrologic/water quality model to allow its usage by farmers and conservation planners. The Pasture Phosphorus Management (PPM) Calculator was developed to predict average annual phosphorus (P) losses from pastures under a variety of field conditions and management options. PPM Calculator is a vastly simplified interface for the Soil and Water Assessment Tool (SWAT) model that requires no knowledge of SWAT by the user. PPM Calculator was validated using 33 months of data on four pasture fields in northwestern Arkansas. This tool has been extensively applied in the Lake Eucha/Spavinaw Basin in northeastern Oklahoma and northwestern Arkansas. PPM Calculator allows conservation planners to take advantage of the predictive capacity of a comprehensive hydrologic water quality model typically reserved for use by hydrologists and engineers. This research demonstrates the applicability of existing water quality models in the development of user friendly P management tools.     

Specialisations of swimming muscles in the pelagic antarctic fish Pleuragramma antarcticum

The distribution and ultrastructure of muscle-fibre types has been investigated in adult and juvenile specimens of the pelagic high-antarctic silverfish Pleuragramma antarcticum Boulenger, 1902 collected from the South Shetland Islands during the winter of 1984/1985. Two main fibre-types were identified in araldite-embedded material. The axial musculature was mainly composed of poorly vascularised, largediameter muscle fibres which were densely packed with myofibrils (volume density 81 and 72% for adults and juveniles, respectively). These ultrastructural characteristics are typical of fast-twitch fibres. The number of capillaries ner unit cross-sectional area and the volume density of mito