Fluorescence Verses Radioactivity Labeling for Lab-Scale Investigation of the Fate of Water-Soluble Polymers in Wastewater Treatment Plants

Water-soluble synthetic polymers are extensively used in cosmetics, detergents and paints. Many end up in wastewater and, later on, in wastewater-treatment plants. In order to gain an insight into their fate in such plants, fluorescence and radioactivity labelings were compared using a lab-scale reactor designed to mimic industrial conditions. Two fermentation media were considered, namely a mixture of E402 and E204 micro-organisms and an activated sludge collected from a water-treatment plant located in the south of France. A sample of low molar mass commercial poly(acrylic acid) (PAA) was labeled by radioactivity with tritium and by coupling the 6-aminofluorescein fluorescent dye. Labeled PAA-containing sludges were allowed to ferment. To monitor the fate of the polymers, aliquots of the fermented mixtures were withdrawn at selected times and centrifuged. Liquid and solid phases were analyzed by scintigraphy or UV spectrometry, depending of the labeling techniques. Both techniques led to similar distributions, c.a. 75% in the supernatant and 25% in the solid phase. Distributions remained constant during the biological tests. There was no degradation of the commercial PAA after aqueous size exclusion chromatography (SEC), in agreement with literature. These features showed that fluorescence-labeling can be used instead of the complex and expensive radiolabeling. The validated fluorescence-based method was then applied to a linear poly(acrylic acid) synthesized by ATRP and labeled with 6-aminofluorescein. There was no significant difference between the commercial and the linear poly(acrylic acid)s. In contrast, a linear PAA with 5% of tert-butyl ester repeating units was predominantly found in the solid phase although adsorption or absorption by micro-organisms could not be demonstrated. The method based on fluorescence labeling should be applicable to other water soluble polymers provided that the dye remains attached to the polymer as it was the case for the studied poly(acrylic acid)s.     

Fourth WHO-coordinated survey of human milk for persistent organic pollutants (POPs): Belgian results

Persistent organic pollutants (POPs) are chemicals that accumulate in the food chain and are toxic to humans and wildlife. The fourth World Health Organization (WHO) survey on POP levels in human milk (2006-2009) aims to provide baseline and trend information on human exposure to POPs. So far Belgium participated in all three previous rounds (1988, 1992, 2001). Whereas the first three rounds focused on determination of dioxins and PCBs in pooled (mixed) samples, the fourth survey comprised the analyses of individual milk samples for nine "basic POPs" (chlorinated pesticides and indicator PCBs) and of pooled milk samples for "basic POPs", "advanced POPs" (dioxins and dioxin-like PCBs) and "optional POPs" (polybrominated diphenylethers [PBDEs], polybrominated dioxins and dibenzofurans [PBrDD/F], mixed halogenated dioxins and dibenzofurans [PXDD/F] and hexabromocyclododecane [HBCD]). For the Belgian participation human milk samples were collected during the summer of 2006 from 197 women between 18 and 30 years old distributed over all Belgian provinces. The individual samples were analyzed in a Belgian Laboratory for "basic" POPs. A pooled sample was made from 178 individual samples and analyzed by the WHO Reference Laboratory for the "basic, advanced and optional" POPs. The results indicate that most organochlorinated pesticides banned 25-30 years ago were below or around detection limits in Belgian human milk samples although DDE was still found at low levels in all samples. Over the last five years the levels of marker PCBs and PCDD/Fs in Belgian human milk decreased, respectively, by 58% and 39%. For some of the other emerging or older compounds recent international data are needed to allow comparison. This shows the importance of international studies as run by WHO.     

Effects of sediment quality on macroinvertebrates in the Sunraysia region of the Murray-Darling Rivers, Australia

A field-based microcosm approach was tested to identify deterioration of sediment quality in waterways using freshwater macroinvertebrates. The method can potentially identify the nature of contaminants based on species-specific responses. Sediments were collected from the Murray and Darling Rivers and irrigation drains within the Sunraysia region of south-eastern Australia and compared to non-polluted reference sediment. Clean sediments were also spiked with fertiliser to test whether nutrients affected the aquatic fauna. Seven of the eight sediments from the Sunraysia region had a negative impact on the macroinvertebrates, in particular sediment from the Darling River, which supported an impoverished fauna. Three species of chironomid showed varied responses to sediment quality and, although it was hypothesised that nutrients may have impacted on the macroinvertebrate fauna, the results suggest that other pollutants are also involved. The field-based microcosm method proved effective for determining the impact of sediment quality on indigenous macroinvertebrates.     

Tolerance of transgenic canola plants (Brassica napus) amended with plant growth-promoting bacteria to flooding stress at a metal-contaminated field site

The growth of transgenic canola (Brassica napus) expressing a gene for the enzyme 1-aminocyclopropane-1-carboxylate (ACC) deaminase was compared to non-transformed canola exposed to flooding and elevated soil Ni concentration, in situ. In addition, the ability of the plant growth-promoting bacterium Pseudomonas putida UW4, which also expresses ACC deaminase, to facilitate the growth of non-transformed and transgenic canola under the above mentioned conditions was examined. Transgenic canola and/or canola treated with P. putida UW4 had greater shoot biomass compared to non-transformed canola under low flood-stress conditions. Under high flood-stress conditions, shoot biomass was reduced and Ni accumulation was increased in all instances relative to low flood-stress conditions. This is the first field study to document the increase in plant tolerance utilizing transgenic plants and plant growth-promoting bacteria exposed to multiple stressors.     

Population screening for gestational hypertensive disorders using maternal,fetal and placental characteristics: A population-based prospective cohort study

Objective

To determine screening performance of maternal, fetal and placental characteristics for selecting pregnancies at risk of gestational hypertension and preeclampsia in a low-risk multi-ethnic population.

Method

In a prospective population-based cohort among 7124 pregnant women, we collected maternal characteristics including body mass index, ethnicity, parity, smoking and blood pressure in early-pregnancy. Fetal characteristics included second and third trimester estimated fetal weight and sex determined by ultrasound. Placental characteristics included first and second trimester placental growth factor concentrations and second and third trimester uterine artery resistance indices.

Results

Maternal characteristics provided the best screening result for gestational hypertension (area-under-the-curve [AUC] 0.79 [95% Confidence interval {CI} 0.76-0.81]) with 40% sensitivity at 90% specificity. For preeclampsia, the maternal characteristics model led to a screening performance of AUC 0.74 (95% CI 0.70-0.78) with 33% sensitivity at 90% specificity. Addition of second and third trimester placental ultrasound characteristics only improved screening performance for preeclampsia (AUC 0.78 [95% CI 0.75-0.82], with 48% sensitivity at 90% specificity).

Conclusion

Routinely measured maternal characteristics, known at the start of pregnancy, can be used in screening for pregnancies at risk of gestational hypertension or preeclampsia within a low-risk multi-ethnic population. Addition of combined second and third trimester placental ultrasound characteristics only improved screening for preeclampsia.

     

Describing variability of MSW composition data with the log-logistic distribution

Variations in solid waste composition data are necessary as inputs to solid waste planning, yet uncertainty exists regarding which probability distributions might be generally valuable to describe the variability. Twenty-two detailed analyses of solid waste from British Columbia, Canada, were fitted to distributions using the BestFit software. Alternative distributions were ranked based on three goodness-of-fit parameters and twelve waste fractions. The log-logistic distribution was found to be the most able to fit over the wide range of composition types considered. The results were demonstrated to be insensitive to the number of waste components or to the choice of a two- or three-parameter distribution. Although other distributions were able to better match the waste composition for individual waste types, the log-logistic distribution was demonstrated to fit, overall, a wide variety of waste composition types.     

Estimating Evapotranspiration and Seepage for a Sinkhole Wetland From Diurnal Surface‐Water Cycles1

Abstract: This study used measured diurnal surface‐water cycles to estimate daily evapotranspiration (ET) and seepage for a seasonally flooded sinkhole wetland. Diurnal surface‐water cycles were classified into five categories based on the relationship between the surface‐water body and the surrounding ground‐water system (i.e., recharge/discharge). Only one class of diurnal cycles was found to be suitable for application of this method. This subset of diurnal cycles was used to estimate ET and seepage and the relative importance of each transfer process to the overall water budget. The method has limited utility for wetlands with erratic hydrologic regimes (e.g., wetlands in urban environments). This is due to violation of the critical assumption that the inflow/outflow rate remains constant throughout the day. For application to surface‐water systems, the method is typically applied with an assumed specific yield of 1.0. This assumption was found to be invalid for application to surface‐water systems with a noncylindrical pond geometry. An overestimation of ET by as much as 60% was found to occur under conditions of low pond stage and high water loss. The results demonstrate the high ET rates that can occur in isolated wetlands due to contrasting roughness and moisture conditions (oasis and clothesline effects). Estimated ET rates ranged from 4.1 to 18.7 mm/day during the growing season. Despite these large ET rates, seepage (recharge) was found to be the dominant water loss mechanism for the wetland.     

Effect of indigenous bacterial activity on arsenic mobilization under anaerobic conditions

Batch biochemical leaching tests were carried out to investigate the mobility of arsenic from a contaminated soil collected from a French gold mining site. The specific objective of this research was to examine the effect of indigenous bacterial activity on arsenic mobilization under anaerobic conditions. In a first step, physical and chemical characterizations were performed to provide data concerning the liquid-solid partitioning and mobility of arsenic and other inorganic constituents. In a second step, batch bioleaching tests were conducted in shaker flasks to determine the effect of indigenous bacterial activity under different anaerobic conditions (i.e., addition of mineral nutrients and carbon sources) on arsenic mobilization. Results indicated that arsenic release during contact with deionized water was limited by its very low solubility in the interstitial solution and by the stability of the different arsenic compounds formed with the amorphous solid phases of the soil (mainly iron (oxy)hydroxides). However, an increased mobilization potential was observed over the long term under anaerobic conditions with indigenous bacterial activity enhanced by the addition of carbon sources.     

Development of a limit state approach for design against gas explosions

The design of topsides against explosions requires the definition of a design over-pressure, however, these values are often treated as deterministic and there is a wide variation within the industry in the treatment and interpretation of the loads.

This paper advocates the adoption of a number of limit state for explosion loading. Events of different magnitudes are differentiated on the basis of frequency and linked to appropriate degree of reliability thus avoiding disproportionate effects from minor events.

The two principal limit states considered are a limit state for all the safety critical systems for relatively high frequency events and a survival condition for low probability events. Parallels are drawn from other branches of engineering where extreme loads have to be designed for.