Visible-light driven oxidation of gaseous aliphatic alcohols to the corresponding carbonyls via TiO2 sensitized by a perylene derivative

Sensitized P25 TiO₂ was prepared by wet impregnation with a home-prepared perylene dye, i.e., N,N′-bis(2-(1-piperazino)ethyl)-3,4,9,10-perylene-tetracarboxylic acid diimide dichloride (PZPER). Energy levels of PZPER were found to be compatible with those of TiO₂ allowing fast electron transfer. The obtained catalyst has been characterized and used in the gas-phase partial oxidation of aliphatic primary and secondary alcohols, i.e., methanol, ethanol, and 2-propanol. The reaction was carried out under cut-off (λ?>?400 nm) simulated solar radiation in O₂ atmosphere. The perylene derivative allowed a good absorbance of visible radiation thanks to its low optical energy gap (2.6 eV) which was evaluated by cyclic voltammetry. The optimal organic sensitizing amount was found to be 5.6 % w/w in terms of yield in carbonyl derivatives. Moreover, no change in reactivity/selectivity was observed after 10-h irradiation thus confirming the catalyst stability. Yields into formaldehyde, acetaldehyde, and acetone were 67, 70, and 96 %, respectively. No significant amounts of organic byproducts were detected but for methanol oxidation, whereas a minor amount of the substrate degraded to CO₂.     

Acid soluble bio-organic substances isolated from urban bio-waste. Chemical composition and properties of products

As previous work proposed commercial expectations for soluble bio-organic substances (SBO) isolated from compost of urban food, gardening and park trimming residues as chemical auxiliaries, nine urban bio-wastes (BW) treated by aerobic and anaerobic digestion for 0-360 days were used to extract SBO and investigate source variability effects on product chemical composition and properties. The bio-wastes were collected over a 13732 km² area populated by 2.9 millions from 565 municipalities. The SBO were characterized by their content of different C types and functional groups and by their distribution coefficient (K_PEGW) between polyethylene glycol and water. A significant linear correlation was found between K_PEGW and the lipophilic/hydrophilic C ratio. The investigated SBO exhibited up to sixfold change of K_PEGW demonstrating that BW available from densely populated urban areas are an interesting exploitable source of a wide variety of potential products for the chemical market.     

A study on PCB, PCDD/PCDF industrial contamination in a mixed urban-agricultural area significantly affecting the food chain and the human exposure. Part I: soil and feed

This study deals with a PCB, PCDD and PCDF contamination in Brescia, a city in the North-West of Italy, affecting an area with about 11000 inhabitants. The area is close to an industrial plant that produced, in total, some 31,000 ton of PCB. A relevant part of the polluted area is agricultural soil, where cattle were fed with polluted forage and farmers were consuming their own products, so that contamination led eventually to human exposure. Total levels of PCDD/Fs varied from 8 to 592 pgTE(WHO)/g for soil samples and when the dioxin-like PCBs (dl-PCBs) are included, the levels varied from 14.6 to 1033.7 pgTE(WHO)/g. In several cases, the legal limit was exceeded by more than one order of magnitude, with the highest contamination in some agricultural areas and in the surrounding zones. For the forage samples, total levels of PCDD/Fs varied from 0.29 to 2.04 pgTE(WHO)/g and, when dl-PCBs are included, this range increased from 2.04 to 4.75 pgTE(WHO)/g. PCB contamination of the forage through vapor condensation seemed to be relevant. The toxic contribution of dl-PCBs is always relevant and must be considered for risk management. The main component of the contamination source is probably a heavy PCB mixture, such as Aroclor 1262. The study dealt generally with the contamination transfer of PCBs, PCDDs and PCDFs from soil up to humans across the food chain. Results on soils and forages are shown, while measurements concerning the contamination of the animals fed with contaminated forage, and the exposure of the farmers (through human serum analyses), as compared to general population, will be reported in a dedicated paper.     

CO2 capture from combined cycles integrated with Molten Carbonate Fuel Cells

In this paper Molten Carbonate Fuel Cells (MCFCs) are considered for their potential application in carbon dioxide separation when integrated into natural gas fired combined cycles. The MCFC performs on the anode side an electrochemical oxidation of natural gas by means of CO₃^2? ions which, as far as carbon capture is concerned, results in a twofold advantage: the cell removes CO₂ fed at the cathode to promote carbonate ion transport across the electrolyte and any dilution of the oxidized products is avoided.The MCFC can be “retrofitted” into a combined cycle, giving the opportunity to remove most of the CO₂ contained in the gas turbine exhaust gases before they enter the heat recovery steam generator (HRSG), and allowing to exploit the heat recovery steam cycle in an efficient “hybrid” fuel cell + steam turbine configuration. The carbon dioxide can be easily recovered from the cell anode exhaust after combustion with pure oxygen (supplied by an air separation unit) of the residual fuel, cooling of the combustion products in the HRSG and water separation. The resulting power cycle has the potential to keep the overall cycle electrical efficiency approximately unchanged with respect to the original combined cycle, while separating 80% of the CO₂ otherwise vented and limiting the size of the fuel cell, which contributes to about 17% of the total power output so that most of the power capacity relies on conventional low cost turbo-machinery. The calculated specific energy for CO₂ avoided is about 4 times lower than average values for conventional post-combustion capture technology. A sensitivity analysis shows that positive results hold also changing significantly a number of MCFC and plant design parameters.     

Tracing groundwater circulation in a valuable mineral water basin with geochemical and isotopic tools: the case of FERRARELLE,Riardo basin,Southern Italy

Environmental Geochemistry and Health - The Riardo basin hosts groundwater exploited for the production of high quality, naturally sparkling, bottled water (e.g., Ferrarelle water), and circulating...     

Study of the SRF-derived ashes melting behavior and the effects generated by the optimization of their composition on the furnaces energy efficiency in the incineration plants

As regards the incineration process of the urban solid waste, the composition correct management allows not only the valorization of precise civil and industrial groups of waste as alternative fuels but also a considerable increase of the furnace work temperature leading to a remarkable improvement of the related energy efficiency. In this sense, the study of the melting behavior of ashes deriving from several kinds of fuels that have to be processed to heat treatment is really important. This approach, indeed, ensures to know in depth the features defining the melting behavior of these analyzed samples, and as a consequence, gives us the necessary data in order to identify the best mixture of components to be incinerated as a function of the specific working temperatures of the power plant. Firstly, this study aims to find a way to establish the softening and melting temperatures of the ashes because they are those parameters that strongly influence the use of fuels. For this reason, in this work, the fusibility of waste-derived ashes with different composition has been investigated by means of the heating microscope. This instrument is fundamental to prove the strict dependence of the ashes fusion temperature on the heating rate that the samples experienced during the thermal cycle. In addition, in this work, another technological feature of the instrument has been used allowing to set an instantaneous heating directly on the sample in order to accurately reproduce the industrial conditions which characterize the incineration plants. The comparison between the final results shows that, in effect, the achievement of the best performances of the furnace is due to the a priori study of the melting behavior of the single available components.     

Assessment of potentially harmful elements pollution in the Calore River basin (Southern Italy)

The geographical distribution of concentration values for harmful elements was determined in the Campania region, Italy. The study area consists of the drainage basin of the River Calore, a tributary of the river Volturno, the largest Southern Italian river. The results provide reliable analytical data allowing a quantitative assessment of the trace element pollution threat to the ecosystem and human health. Altogether 562 stream sediment samples were collected at a sampling density of 1 site per 5 km². All samples were air-dried, sieved to <100 mesh fraction and analyzed for 37 elements after an aqua regia extraction by a combination of ICP-AES and ICP-MS. In addition to elemental analysis, gamma-ray spectrometry data were collected (a total of 562 measurements) using a hand-held Scintrex GRS-500 spectrometer. Statistical analyses were performed to show the single-element distribution and the distribution of elemental association factor scores resulting from R-mode factor analyses. Maps showing element distributions were made using GeoDAS and ArcGIS software. Our study showed that, despite evidence from concentrations of many elements for enrichment over natural background values, the spatial distribution of major and trace elements in Calore River basin is determined mostly by geogenic factors. The southwestern area of the basin highlighted an enrichment of many elements potentially harmful for human health and other living organisms (Al, Fe, K, Na, As, Cd, La, Pb, Th, Tl, U); however, these anomalies are due to the presence of pyroclastic and alkaline volcanic lithologies. Even where sedimentary lithologies occur, many harmful elements (Co, Cr, Mn, Ni) showed high concentration levels due to natural origins. Conversely, a strong heavy metal contamination (Pb, Zn, Cu, Sb, Ag, Au, Hg), due to an anthropogenic contribution, is highlighted in many areas characterized by the presence of road junctions, urban settlements and industrial areas. The enrichment factor of these elements is 3–4 times higher than the background values. The southwestern area of the basin is characterized by a moderate/high degree of contamination, just where the two busiest roads of the area run and the highest concentration of industries occurs.     

Mitochondrial DNA Variability in Italian and East European Wolves: Detecting the Consequences of Small Population Size and Hybridization

Abstract: The Italian wolf ( Canis lupus ) population has declined continuously over the last few centuries and become isolated as a result of the extermination of other populations in central Europe and the Alps during the nineteenth century. In the 1970s, approximately 100 wolves survived in 10 isolated areas in the central and southern Italian Apennines. Loss of genetic variability, as suggested by preliminary studies of mitochondrial DNA (mtDNA) sequences, hybridization with feral dogs, and the illegal release of captive, non-native wolves are considered potential threats to the viability of the Italian wolf population. We sequenced 546 base pairs of the mtDNA control region in a comprehensive set of Italian wolves and compared them to those of dogs and other wolf populations from Europe and the Near East. Our data confirm the absence of mtDNA variability in Italian wolves: all 101 individuals sampled across their distribution in Italy had the same, unique haplotype, whereas seven haplotypes were found in only 26 wolves from an outbred population in Bulgaria. Most haplotypes were specific either to wolves or dogs, but some east European wolves shared haplotypes with dogs, indicative of hybridization. In contrast, neither hybridization with dogs nor introgression of non-native wolves was detected in the Italian population. These findings exclude the introgression of dog genes via matings between male wolves and female dogs, the most likely direction of hybridization. The observed mtDNA monomorphism is the possible outcome of random drift in the declining and isolated Italian wolf population, which probably existed at low effective population size during the last 100–150 years. Low effective population size and the continued loss of genetic variability might be a major threat to the long-term viability of Italian wolves. A controlled demographic increase, leading to recolonization of the historical wolf range in Italy, should be enforced.