Redistribution of slurry components as influenced by injection method, soil, and slurry properties

The distribution of moisture, degradable C, and N after direct injection of slurry can affect the turnover and plant availability of slurry N. This study examined effects of injection method, soil conditions, and slurry properties on the infiltration of several slurry components under practical conditions. The water retention capacity of 22 pig and cattle slurries was quantified by dialysis at -0.016, -0.047, and -0.100 MPa. All slurries followed the relationship: relative water loss = 1/(1 + aVS[volatile solids]), indicating that retention of liquids in the slurry injection zone can be predicted from slurry VS and soil water potential. Two-disc injection and harrow tine injection were simulated (no slurry applied) in five trials. Two trials indicated that disc injection resulted in higher permeability compared with harrow tine injection. In a separate experiment, soil moisture and dissolved ions were monitored in and around injection slits amended with pig or cattle slurry. Moisture gradients, which were recorded with small printed-circuit-board (PCB) time-domain-reflectometry (TDR) probes, were temporally stable and reestablished following rainfall. Slit sections with pig and cattle slurry containing 13C-acetate and 15N-ammonium showed a shift in the 13C to 15N ratio of the injection zone within 24 h, which was explained by removal of dissolved C and/or retention of NH4+. Cattle slurry was more concentrated around the injection slit than pig slurry, and greater contact between slurry and soil was obtained with harrow tine injection. The heterogeneity of slurry C and N distribution after direct injection should be accounted for in models describing slurry N turnover.     

Methane production during storage of anaerobically digested municipal organic waste

Anaerobic digestion of source-separated municipal organic waste is considered feasible in Denmark. The limited hydraulic retention in the biogas reactor (typically 15 d) does not allow full degradation of the organic waste. Storage of anaerobically digested municipal organic waste can therefore be a source of methane (CH4) emission that may contribute significantly to the potential global warming impact from the waste treatment system. This study provides a model for quantifying the CH4 production from stored co-digested municipal organic waste and estimates the production under typical Danish climatic conditions, thus quantifying the potential global warming impact from storage of the digested municipal organic waste before its use on agricultural land. Laboratory batch tests on CH4 production as well as temperature measurements in eight full-scale storage tanks provided data for developing a model estimating the CH4 production in storage tanks containing digested municipal organic waste. The temperatures measured in separate storage tanks on farms receiving digested slurry were linearly correlated with air temperature. In storage tanks receiving slurry directly from biogas reactors, significantly higher temperatures were measured due to the high temperatures of the effluent from the reactor. Storage tanks on Danish farms are typically emptied in April and have a constant inflow of digested material. During the warmest months the content of digested material is therefore low, which limits the yearly CH4 production from storage.     

Levels of persistent organic pollutants (POPs) in a coastal northern Norwegian population with high fish-liver intake

Recent research has again raised the issue regarding the potential health effects of long term exposure to persistent organic pollutants (POPs) in the context of a risk-benefit analysis. There remains clear evidence of the beneficial effects of fish consumption on public health and in particular fatty fish with its essential fatty acids. In addition to providing fatty acids, fish fat constitutes an essential source to vitamin D for the northern Norwegian population. Norwegian Food Control Authorities have recommended that children and women of childbearing age should not consume fish liver due to the risk associated with high intake of POPs. The aim of this study was to assess the influence of fish liver intake on the levels of PCBs and chlorinated pesticides in a rural coastal community (n = 31) in northern Norway, applying a cross-sectional design. The geometric mean plasma levels of sum of PCBs (14 congeners) and p,p'-DDE was found to be 558 microg kg(-1) lipids and 179 microg kg(-1) lipids, respectively. These levels were not significantly affected by the reported intake of fish liver, when age and gender were considered. Age in particular, but also gender were significant predictors for most compounds. When merging the dataset with an urban population with considerable lower intake of fish liver, the intake of cod liver still did not significantly affect the levels of PCBs and p,p'-DDE when adjusted for age and gender. Age and gender remain the strongest predictors of plasma levels of POPs in this study whereas fish liver intake was not significantly associated with the POPs.     

Spatiotemporal variability in surface energy balance across tundra,snow and ice in Greenland

The surface energy balance (SEB) is essential for understanding the coupled cryosphere–atmosphere system in the Arctic. In this study, we investigate the spatiotemporal variability in SEB across tundra, snow and ice. During the snow-free period, the main energy sink for ice sites is surface melt. For tundra, energy is used for sensible and latent heat flux and soil heat flux leading to permafrost thaw. Longer snow-free period increases melting of the Greenland Ice Sheet and glaciers and may promote tundra permafrost thaw. During winter, clouds have a warming effect across surface types whereas during summer clouds have a cooling effect over tundra and a warming effect over ice, reflecting the spatial variation in albedo. The complex interactions between factors affecting SEB across surface types remain a challenge for understanding current and future conditions. Extended monitoring activities coupled with modelling efforts are essential for assessing the impact of warming in the Arctic.     

Addressing soil gas vapor intrusion using sustainable building solutions

Soil gas vapor intrusion (VI) emerged in the 1990s as one of the most important problems in the investigation and cleanup of thousands of sites across the United States. A common practice for sites where VI has been determined to be a significant pathway is to implement interim building engineering controls to mitigate exposure of building occupants to VI while the source of contamination in underlying soil and groundwater is assessed and remediated. Engineering controls may include passive barriers, passive or active venting, subslab depressurization, building pressurization, and sealing the building envelope. Another recent trend is the emphasis on “green” building practices, which coincidentally incorporate some of these same engineering controls, as well as other measures such as increased ventilation and building commissioning for energy conservation and indoor air quality. These green building practices can also be used as components of VI solutions. This article evaluates the sustainability of engineering controls in solving VI problems, both in terms of long‐term effectiveness and “green” attributes. Long‐term effectiveness is inferred from extensive experience using similar engineering controls to mitigate intrusion of radon, moisture, mold, and methane into structures. Studies are needed to confirm that engineering controls to prevent VI can have similar long‐term effectiveness. This article demonstrates that using engineering controls to prevent VI is “green” in accelerating redevelopment of contaminated sites, improving indoor air quality, and minimizing material use, energy consumption, greenhouse gas emissions, and waste generation. It is anticipated that engineering controls can be used successfully as sustainable solutions to VI problems at some sites, such as those deemed technically impracticable to clean up, where remediation of underlying soil or groundwater contamination will not be completed in the foreseeable future. Furthermore, green buildings to be developed in areas of potential soil or groundwater contamination may be designed to incorporate engineering controls to prevent VI. © 2009 Wiley Periodicals, Inc.     

Cross-cultural comparisons of traffic safety,risk perception,attitudes and behaviour

The core aim of the present study is to examine cultural differences in risk perception and attitudes towards traffic safety and risk, taking behaviour in the Norwegian and the Ghanaian public. An additional aim is to discuss the applicability of various traffic measures, suited for low and middle income countries in Africa.Sample: The results of the present study are based on two self-completion questionnaire surveys carried out in February and March 2006. The first was a representative sample of the Norwegian public above 18 years of age (N = 247). The second was a stratified sample of Ghanaian respondents (N = 299). In Ghana the data was collected in Accra and Cape Coast.The results showed that there is potential for further improvement of safety attitudes and risk behaviour among Ghanaians as well as Norwegians. There were also differences in the respondents’ evaluation of attitudes, risk perception and behaviour. Perceived risk and attitudes also significantly predicted risk behaviour and accidents/collisions. The implications of these results for traffic safety will be discussed.     

Effects of pre-treatment technologies on quantity and quality of source-sorted municipal organic waste for biogas recovery

Source-sorted municipal organic waste collected from different dwelling types in five Danish cities and pre-treated at three different plants was sampled and characterized several times during one year to investigate the origin of any differences in composition of the pre-treated waste introduced by city, pre-treatment technology, dwelling type or annual season. The investigated pre-treatment technologies were screw press, disc screen and shredder+magnet. The average quantity of pre-treated organic waste (biomass) produced from the incoming waste varied between the investigated pre-treatment technologies: 59%, 66% and 98% wet weight, respectively (41%, 34% and 2% reject, respectively). The pre-treatment technologies showed differences with respect to distribution of the chemical components in the waste between the biomass and the rejected material (reject), especially for dry matter, ash, collection bag material (plastic or paper) and easily degradable organic matter. Furthermore, the particle size of the biomass was related to the pre-treatment technology. The content of plastic in the biomass depended both on the actual collection bag material used in the system and the pre-treatment technology. The sampled reject consisted mostly of organic matter. For cities using plastic bags for the source-separated organic waste, the expected content of plastic in the reject was up to 10% wet weight (in some cases up to 20%). Batch tests for methane potential of the biomass samples showed only minor variations caused by the factors city, pre-treatment technology, dwelling type and season when based on the VS content of the waste (overall average 459STPm(3)/tVS). The amount of methane generated from 1t of collected waste was therefore mainly determined by the efficiency of the chosen pre-treatment technology described by the mass distribution of the incoming waste between biomass and reject.