On the thermal rupture of 1.9 m propane pressure vessels with defects in their thermal protection system

This paper describes the results from a series of fire tests that were carried out to measure the effect of defects in thermal protection systems on fire engulfed propane pressure vessels.

In North America thermal protection is used to protect dangerous goods rail tank-cars from accidental fire impingement. They are designed so that a tank-car will not rupture for 100 min in a defined engulfing fire, or 30 min in a defined torching fire. One common system includes a 13 mm blanket of high-temperature ceramic fibre thermal insulation covered with a 3 mm steel jacket. Recent inspections have shown that some tanks have significant defects in these thermal protection systems. This work was done to establish what levels of defect are acceptable from a safety standpoint.

The tests were conducted using 1890 l (500 US gallon) ASME code propane pressure vessels (commonly called tanks in the propane industry). The defects tested covered 8% and 15% of the tank surface. The tanks were 25% engulfed in a fire that simulated a hydrocarbon pool fire with an effective blackbody temperature of 870 °C.

The fire testing showed that even relatively small defects can result in tank rupture if the defect area is engulfed in a severe fire, and the defect area is not wetted by liquid from the inside. A wall failure prediction technique based on uniaxial high-temperature stress rupture test data has been developed and agrees well with the observed failure times.     

Defending the Wrist Deviation Test for Carpal Tunnel Syndrome Screening: A Comparison of Vibration Thresholds and Distal Motor Latency

This research used distal motor latency (DML) and vibration thresholds (VT) to evaluate 84 hand activity and wrist deviation combinations to determine the best association with carpal tunnel syndrome (CTS). Female volunteers, 2 healthy and 2 CTS diagnosed, were age matched and operated a keyboard for 4 hrs a day. Room temperature was 28°C(±2). Beginning DML and VT were taken with a relaxed neutral posture hand. The wrist was deviated in a randomly selected combination, and determinations were taken at 5-min intervals. The trial ended at 20 min or when discomfort was felt. The CTS conditions were discriminated by pain four times, DML once, and VT 14 times. Vibrometry was the most consistent CTS discriminator. The best VT results for wrist positions were obtained with wrist extension and extended extension, whereas the unclenched, clenched, and loaded power grip activities proved to be the most consistent hand activities.     

Ergonomic Aspects of a Virtual Environment

A virtual environment is an interactive graphic system mediated through computer technology that allows a certain level of reality or a sense of presence to access virtual information. To create reality in a virtual environment, ergonomics issues are explored in this paper, aiming to develop the design of presentation formats with related information, that is possible to attain and to maintain user-friendly application.     

An Evaluation of the NIOSH Lifting Equation: A Psychophysical and Biomechanical Investigation

Using the results of psychophysical and biomechanical experiments, NIOSH (National Institute for Occupational Safety and Health) Recommended Weight Limit (RWL), the Lifting Index (LI), the form of the asymmetry multiplier, and the criterion for compression force were investigated. Analysis of the results indicated a significant difference between the NIOSH RWL and the reported Maximum Acceptable Weight of Lift (MAWL). Contrary to the NIOSH lifting equation, the form of the asymmetry multiplier was found to be non-linear. The overall average of peak compression force on the L5/S1 was 3685 N. Fifty-eight percent of all compression forces reported in the biomechanical experiment were found to exceed the suggested 3400 N set by NIOSH guidelines. These results support previous research findings on the validity of NIOSH guidelines.     

A Study of Computer-Based Task Performance Under Thermal Stress

A visual-visual dual computer task was designed to test the effect of the thermal environment on dual task performance. The temperatures selected for testing were 20 and 35 °C Wet Bulb Globe Temperature (WBGT). 34 volunteers were randomly assigned to 1 of the 2 temperature conditions. Individual differences in single task performance were controlled by equating the baselines of single task performance. Once individual differences in single task capacity were controlled, statistically significant differences in performance were demonstrated. Mean accuracy was computed over a 1-hr testing period in each temperature condition. Participants’ mean accuracy in the 35° condition (38.18%) was substantially lower than in the 20° condition (50.88%).     

Hot Steam Transfer Through Heat Protective Clothing Layers

The aim of this study was to analyse the transfer of steam through different types of textile layers as a function of sample parameters such as thickness and permeability. In order to simulate the human body, a cylinder releasing defined amounts of moisture was also used. The influence of sweating on heat and mass transfer was assessed.

The results show that in general impermeable materials offer better protection against hot steam than semi-permeable ones. The transfer of steam depended on the water vapour permeability of the samples, but also on their thermal insulation and their thickness. Increasing the thickness of the samples with a spacer gave a larger increase in protection with the impermeable samples compared to semi-permeable materials. Measurements with pre-wetted samples showed a reduction in steam protection in any case. On the other hand, the measurements with a sweating cylinder showed a beneficial effect of sweating.     

Performance of Firefighters’ Protective Clothing After Heat Exposure

Heat and mechanical protection properties of 6 fabric combinations commonly used in firefighters’ protective clothing were assessed before and after different heat treatment. It was shown that after heat exposure, the values obtained were generally lower than in the original state. The mechanical properties of the materials were more affected by heat than by heat protective properties. In 2 cases, degradation started before a visible change in the material could be observed, which might be potentially dangerous for the end user who will not realize the alteration of the material.     

Occupational Exposure to Natural UV Radiation and Premature Skin Ageing

The skin is the part of the human body most vulnerable to ultraviolet (UV) radiation. The spectrum of the negative effects of UV radiation on the skin ranges from acute erythema to carcinogenesis. Between these extreme conditions, there are other common skin lesions, e.g.,photoageing. The aim of this study was to assess the skin for signs of photoageing in a group of 52 men occupationally exposed to natural UV radiation. There were 2 types of examinations: an examination of skin condition (moisture, elasticity, sebum, porosity, smoothness, discolourations and wrinkles) with a device for diagnosing the skin, and a dermatological examination. The results of both examinations revealed a higher percentage of skin characteristics typical for photoageing in outdoor workers compared to the general population.     

The determinants of employee participation in occupational health and safety management

This article focuses on employee direct participation in occupational health and safety (OHS) management. The article explains what determines employee opportunities to participate in OHS management. The explanatory framework focuses on safety culture and safety management at workplaces. The framework is empirically tested using Estonian cross-sectional, multilevel data of organizations and their employees. The analysis indicates that differences in employee participation in OHS management in the Estonian case could be explained by differences in OHS management practices rather than differences in safety culture. This indicates that throughout the institutional change and shift to the European model of employment relations system, change in management practices has preceded changes in safety culture which according to theoretical argument is supposed to follow culture change.     

Ergonomic analysis of working postures using OWAS in semi-trailer assembly,applying an individual sampling strategy

In semi-trailer assembly, workers are exposed to several physical risk factors. Awkward working postures have not yet been investigated in semi-trailer assembly, although they are known to be a major risk factor for musculoskeletal disorders. We therefore conducted a comprehensive ergonomic analysis of working postures using the Ovako working posture analysing system (OWAS), with an individual sampling strategy. The postural load in semi-trailer assembly was assessed on the basis of 20,601 observations of 63 workers executing a representative set of nine work tasks. According to the OWAS, the postural load of various working postures and body part positions may have a harmful effect on the musculoskeletal system. We therefore give examples of corrective measures that could improve awkward working postures. Applying an individual sampling strategy was revealed to have advantages over a collective strategy, so this is recommended for future ergonomic analyses.