IMPACT OF WATER CUTBACK ON SUGARCANE PRODUCTION IN THE FLORIDA EVERGLADES1

ABSTRACT: Sugarcane (Saccharum spp.) was planted in six lysimeters containing Pahokee muck (Lithic Mediaprist) where water tables were maintained at 30, 60, and 90 cm depths. The main objective was to study the impact of a 40 percent water cutback (108 mm) on sugarcane production during the period near the end of the dry season (i.e., May). The water cutback treatment was simulated through manipulation of water table depth. Due to the high available water capacity of the muck soil and selection of a sugarcane cultivar ‘CP63-588’ (which has a high tolerance of water table fluctuations), the sugarcane growth, and the yields of sugarcane biomass and sugar were not significantly different as a result of the treatments with and without 40 percent water cutback during a period of two months. This result is in good agreement with the 1981 cane yield in the Everglades Agricultural Area where a 35 percent water cutback was imposed during the 1981 drought.     

USING LANDSAT DATA TO CLASSIFY LAND USE FOR ASSESSING THE BASINWIDE RUNOFF INDEX1

Remote sensing data in the form of Landsat computer compatible tapes (CCT) was used to determine land use and land cover as an aid in hydrologic studies that were used to estimated a basinwide runoff index. With the use of the General Electric Image 100 multispectral image processing system in conjunction with the Earth Resources Laboratory Application Software (ELAS), CCT's on February 9, 1976, were analyzed by spectral differences to determine unique land use conditions within the Econlockhatchee (Econ) River Basin, Florida. The result showed that the Landsat data can be successfully used to monitor the USGS land use Level 1. An advantage of using the Landsat data for land use classification is that new data are periodically available for updating the land use information. The Soil Conservation Service curve number was used to establish a basinwide runoff index which includes a prime variable of land use changes with the time. The basinwide runoff index in 1972 (with USGS 1972 Land Use maps) was similar to the one in 1976 (with Landsat data dated February 9, 1976). This implies that the runoff from the entire Econ Basin was not noticeably changed during the period of 1972 and 1976.     

Exposure assessment of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) in temporary municipal-waste-incinerator maintenance workers before and after annual maintenance

Polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) have been found in ambient air around municipal waste incinerators (MWIs), and elevated serum levels in incinerator workers have also been observed in some studies. However, few studies have focused on temporary employees who work intermittently through the annual maintenance and clean-up around different incinerators. The present study aimed to assess the change in serum PCDD/F levels of temporary employees between the beginning of periodic incinerator maintenance and one month the work was completed. Thirty-five volunteer workers, most of them transient and temporary maintenance staff, were recruited from a contractor that provided annual maintenance for four incinerators in this study. Information about each participant was obtained by questionnaire at the beginning of annual maintenance. The questionnaire asked for work history, health status, and diet information. As measured by the PCDD/F levels in blood, a significant increase was observed in workers after a month of maintenance work. The increase was greater in workers who had never done this type of maintenance than in those with previous experience, especially for 2,3,4,6,7,8-HxCDF levels. The data also showed that the laborers and employers need to pay more attention to occupational health issues even for short-term incinerator maintenance workers.     

Effect of crystal size on zinc stabilization in aluminum-rich ceramic matrix

With aluminum as the predominant element, incineration residues from municipal solid waste and sewage sludge may be reused as precursors for zinc stabilization. As solid-state reactions are influenced by the crystal sizes of the reactants, the aluminum-containing components with different crystal sizes in the incineration residues may affect zinc transformation and immobilization. In this study, Al₂O₃ was prepared with a variety of crystal sizes to simulate the aluminum-rich incineration residue matrix, and ZnO was mixed with Al₂O₃ to study the zinc incorporation mechanisms. The crystal sizes of Al₂O₃ were determined using Rietveld refinement. Quantification results showed that ~?30% of zinc was incorporated into the ZnAl₂O₄ spinel when Al₂O₃ with the largest crystal size was used. However, the zinc transformation was enhanced twofold when the Al₂O₃ precursor had the smallest crystal size. This study confirmed the potential enhancement of zinc immobilization by nanoscale crystals in simulated aluminum-rich incineration residues. By improving zinc stabilization efficiencies using poorly crystallized aluminum-containing compounds instead of increasing the energy consumption by increasing the sintering temperatures, we can achieve an economic and environmental win–win scenario for the beneficial utilization of incineration residues of municipal solid waste and sewage sludge.     

Dry deposition of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) in ambient air

The PCDD/Fs in the ambient air associated with concentration and dry deposition flux of four seasons were characterized in rural area. The mean PCDD/F concentrations were 0.342, 0.221, 0.675, 0.741 pg m(-3) and the mean I-TEQ values were 0.027, 0.016, 0.024, 0.063 pg m(-3) in spring, summer, fall and winter, respectively. Ambient air in winter was higher by a factor of 3.4 and 3.9 for PCDD/F concentration and I-TEQ, respectively, than in summer. The study area is located in a Tropical region. Hence, domestic heating is not found in this area and is not responsible for the elevated winter concentration in comparison to other studies. A smooth plate with a sharp leading edge that is pointed into the wind by a wind vane was used for measuring dry deposition flux of PCDD/Fs. Atmospheric dry deposition fluxes of total PCDD/Fs were 140, 116, 137, and 207 pg m(-2)day(-1) in spring, summer, fall, and winter, respectively, and averaged approximately 150 pg m(-2)day(-1). The total dry deposition flux was found to decrease as the temperature increased. Calculated dry deposition velocities of total PCDD/Fs were 0.45, 0.52, 0.32 and 0.39 cm s(-1) in spring, summer, fall, and winter, respectively, and averaged 0.42 cm s(-1).     

Jobs Versus the Environment: An Industry-Level Perspective

The possibility that workers could be adversely affected by increasingly stringent environmental policies has led to claims of a “jobs versus the environment” trade-off by both business and labor leaders. The present research examines this claim at the industry level for four heavily polluting industries: pulp and paper mills, plastic manufacturers, petroleum refiners, and iron and steel mills. Combining a unique plant-level data set with industry-level demand information, we find that increased environmental spending generally does not cause a significant change in employment. Our average across all four industries is a net gain of 1.5 jobs per $1 million in additional environmental spending, with a standard error of 2.2 jobs—an economically and statistically insignificant effect. There are statistically significant and positive effects in two industries, but total number of affected jobs remains quite small. These small positive effects can be linked to labor-using factor shifts and relatively inelastic estimated demand.     

Removing nitric oxide from flue gas using iron(II) citrate chelate absorption with microbial regeneration

The addition of metal chelates such as Fe(II)EDTA or Fe(II)Cit to wet flue gas desulfurization systems has been shown to increase the amount of NO(x) absorption from gas streams containing SO(2). This paper attempts to demonstrate the advantage of not only using Fe(II)Cit chelate to absorb nitrogen oxides from flue gas but also the advantage gained from adding microorganisms to the system. Two distinct classes of microorganisms are needed: denitrifying and iron-reducing bacteria. The presence of oxygen in flue gas will affect the absorption efficiency of NO by Fe(II)Cit chelate. The oxidation of Fe(II) can be slowed with the help of bacteria in two ways: bacteria can serve to directly reduce Fe(III) to Fe(II) or they can serve to keep levels of dissolved oxygen in the solution low. As a result, after NO absorption, Fe(II)(Cit)NO will be reduced by denitrifying bacteria to Fe(II)Cit while Fe(III) is reduced by anaerobic bacteria back to Fe(II). Our experiments have shown that the implementation of our protocol allowed for an NO reduction rate constant increase from standard levels of 0.0222-0.100 m Mh(-1) with inlet NO changed from 250 to 1000 ppm. We have also found that total Fe concentration tends to decrease after prolonged periods of operation due to the loss of some Fe to the formation of Fe(OH)(3) that settles together with the sludge at the bottom of bioreactor tank.     

Using a Mass Balance Model to Evaluate Groundwater Budget of Seawater‐Intruded Island Aquifers1

Jang, Cheng‐Shin, Chen‐Wuing Liu, Shih‐Kai Chen, and Wen‐Sheng Lin, 2011. Using a Mass Balance Model to Evaluate Groundwater Budget of Seawater‐Intruded Island Aquifers. Journal of the American Water Resources Association (JAWRA) 48(1): 61‐73. DOI: 10.1111/j.1752‐1688.2011.00593.x Abstract: The study developed a mass balance model to evaluate the groundwater budget of seawater‐intruded island aquifers using limited available data. The Penghu islands were selected as a study area. As sparse observed data were available in the islands, methods of combining water and chloride balances were used to determine the amounts of groundwater pumping, seawater intrusion, aquifer storages, and safe yields in the shallow and deep aquifers. The groundwater budget shows that seawater intrusion to freshwater aquifers was 1.38 × 10⁶ and 0.29 × 10⁶ m³/year in the shallow and deep aquifers, respectively, indicating that the seawater intrusion is severe in the both aquifers. The safe yield of the shallow aquifer was 14.56 × 10⁶ m³/year in 2005 which was four times higher than that of the deep aquifer (3.70 × 10⁶ m³/year). However, the annual pumping amounts in the shallow and deep aquifers were 4.77 × 10⁶ and 3.63 × 10⁶ m³/year, respectively. Although the safe yield of the shallow aquifer is enough for all water resources demands, only 55% of exploitation amount was extracted from the shallow aquifer due to its poor water quality. Groundwater exploitation in the deep aquifer should be significantly reduced and regulated by a dynamic management of pumping scheme because the annual pumping amounts are close to the safe yield and seawater intrusion occurs continually. Additionally, to alleviate further aquifer salination, at least half of the current annual groundwater abstraction should be reduced.     

Nano-textured polysilicon solar absorption films

Nano-textured polysilicon (poly-Si) solar absorption films are to be applied to the solar receiver of solar thermal electricity Stirling engine. These films were fabricated by deposition of hydrogenated amorphous silicon films (a-Si:H) into poly-Si films, using the pulse-wave modulation plasma and furnace annealing of the a-Si:H films. This is followed by wet etching of poly-Si films into nano-textured structures. The films are then coated with a-SiN_x:H films as the antireflection and protection layers. It was observed that increasing the pulsed plasma turn-on (t_on) time leads to deposition of less dense a-Si:H film with high hydrogen content and void density. This results in films having low dielectric constant and refractive index, and high optical bandgap. Less-dense a-Si:H film can be transferred into large grain size poly-Si film, using annealing. Also, highly rough nano-textured surface structure can be produced, by etching. The denser a-Si:H film, large grain size poly-Si film, and nano-textured surface poly-Si film can enhance the absorbance of sunlight and reduce the emissivity of far infrared light. The nano-textured poly-Si film coated with an a-SiN_x:H layer can effectively increase the absorbance of sunlight to approximately 85% and reduce the emissivity of far infrared light to 49%. The nano-textured poly-Si/a-SiN_x:H films can be used as efficient solar absorption films for solar thermal electricity Stirling engine.