污泥干化过程中苯系物(BTEX)的释放及其致癌风险评价

在模拟污泥干化的条件下,研究了4种类型污水污泥苯系物(BTEX)的释放特征及其影响因素.结果表明,在50-300℃的干化温度范围内,4种污泥的BTEX释放总置在4.20～161.90μg·m-3之间;在温度高于150℃之后,各类污泥中的BTEX释放量大幅增加;而低于150℃的情况下,污泥中BTEX的释放量仅占总BTEX释放量的5.09%.不同温度下污泥的BTEX释放量与其在污泥中的含量之间存在显著的线性关系.不同类型的污泥其所释放的BTEX组分之间具有较大的差别,污泥中BTEX的含量决定其所释放的数量,而其释放强度则取决于干化温度.对污泥释放BTEX进行健康风险评价表明,各类污泥在150～300℃下所释放的苯对暴露人员存在一定的致癌风险,其中女性相对于男性致癌风险更高.控制污泥干化温度可以最大限度地减少BTEX释放,进而降低致癌风险.     

Dynamics of the buoyant plume off the Pearl River Estuary in summer

Field measurements of salinity, wind and river discharge and numerical simulations of hydrodynamics from 1978 to 1984 are used to investigate the dynamics of the buoyant plume off the Pearl River Estuary (PRE), China during summer. The studies have shown that there are four major horizontal buoyant plume types in summer: Offshore Bulge Spreading (Type I), West Alongshore Spreading (Type II), East Offshore Spreading (Type III), and Symmetrical Alongshore Spreading (Type IV). River mouth conditions, winds and ambient coastal currents have inter-influences to the transport processes of the buoyant plume. It is found that all of the four types are surface-advected plumes by analysing the vertical characteristic of the plumes, and the monthly variations of the river discharge affect the plume size dominantly. The correlation coefficient between the PRE plume size and the river discharge reaches 0.85 during the high river discharge season. A wind strength index has been introduced to examine the wind effect. It is confirmed that winds play a significant role in forming the plume morphology. The alongshore wind stress and the coastal currents determine the alongshore plume spreading. The impact of the ambient currents such as Dongsha Current and South China Sea (SCS) Warm Current on the plume off the shelf has also assessed. The present study has demonstrated that both the river discharge and wind conditions affect the plume evolution.     

Quantitative analysis of CO2 embodiment in international trade: An overview of emerging literatures

The increasing volume of CO₂ embodiment in international trade adds a layer of complexity to environmental policies and has raised arguments on the traditional production based responsibility for CO₂ emissions. In order to help understand the quantity of CO₂ embodiment in trade and its policy implications, this paper gives observations to recently emerging literatures that quantitatively discuss CO₂ embodiment in trade. The analytical approaches share the principle of using input and output modeling but vary dramatically in study boundary and estimation accuracy. The calculations can be roughly categorized into three types: direct quantification of CO₂ embodiments in multiregional trade, direct quantification of CO₂ embodiment in bilateral trade, and indirect analysis by comparing the scenarios with or without trade. The practical estimations strongly rely on trade partner selection and data availability. An obvious imbalance of net CO₂ embodiment in the commodity trade between major developed countries and developing economies as a whole was confirmed by these literatures. Carbon taxes and other possible limitations on CO₂ emissions have been addressed. The consistency across the calculations could be enhanced by systematic analyses in more detail to convince the international community to take binding commitments for the reduction of global CO₂ emissions.     

不同温度下MESBR工艺和传统的SBR工艺对比试验研究

在不同温度下,研究了流化填料分格式SBR工艺(简称MESBR工艺)与传统的SBR工艺的COD去除率,有机物降解速率,脱氮效果和污泥沉降性能。结果表明:MESBR系统温度下降到5℃时,COD的去除率基本稳定在90%以上,比传统SBR系统高出15%左右;MESBR系统与传统SBR系统的温度系数θ分别为1.021和1.045。温度由20℃下降至5℃时,传统SBR系统的TN和NH3-N去除率分别降低26.5%和20%,而MESBR系统分别降低18.6%和11%。传统SBR系统SVI值随温度变化较大,当温度下降到5℃时SVI值达到234.8 mL/g,而MESBR系统的SVI值没有明显的变化,基本维持在120~130 mL/g。     

约翰内斯堡工艺的工程实践

通过监测城市污水处理厂约翰内斯堡工艺脱氮除磷各处理单元实际运行情况,分析该工艺实际运行效果,探讨该工艺中溶解氧(DO)、污泥龄(SRT)、碳源等因素对系统脱氮除磷效果的影响。     

加油站地下储油罐压力管理系统的相关研究

在当前普遍采用的加油站真空辅助式第二阶段油气回收系统中,为了避免回收到地下储油罐中的油气再次通过P/V阀排空,必须对其中气相空间的压力实施有效控制。从国外的发展情况来看,地下储油罐的压力管理系统主要分为基于膜分离技术、基于弹性气囊和基于活性炭吸附三大类,其中膜法油气回收装置在国内已经得到了较多关注。首次系统介绍了气囊式压力管理系统的工作原理及其主要结构设计,具体包括管线布局、钢制压力容器壳体、位于容器顶部封头上的接口组件和全部位于容器内的气囊等;同时对另外一种可行方案进行了分析。     

砒霜生产化工厂危险废物处置工程设计

通过对砒霜生产化工厂原场址废渣及污染场地调查的基础上,进行了处置方案比选及技术经济比较,确定了就地安全填埋的处置方案。根据区域性危险废物集中安全填埋场的设计经验,本工程采用先进的HDPE双层防渗的安全填埋方式,并设置了雨水分流系统、渗滤液收集系统、封场处理和填埋气体导排系统,整个场区布置合理,对周围环境的影响小,投资少,取得了良好的社会效益和环境效益,并对危险废物处理处置工程设计中应注意的问题提出了建议。     

公路两侧土壤中铅和镉污染以及存在形态分布的分析

测定了土壤中铅、镉总量,并采用五级连续浸提法和石墨炉原子吸收分光光度法对北京市3条典型公路两侧的土壤样品中铅和镉的存在形态分布进行了测定.结果表明,所选3条公路出京方向右侧的土壤铅和镉污染严重,其铅、镉总量分别是北京地区土壤铅和镉含量背景值的1.62～6.69、5.97～18.74倍.土壤中铅主要以铁锰氧化物结合态、碳酸盐结合态、有机结合态和残渣态等形式存在,镉主要以铁锰氧化物结合态和残渣态形式存在,而活性强的离子交换态浓度均较低.不容忽视的是,铅和镉的碳酸盐结合态在碱性条件下稳定,但是具有遇酸释放的隐患.     

产朊假丝酵母处理马铃薯淀粉废水

研究了pH、接种量、无机盐(通过加入磷酸二氢钾进行无机盐补充)及DO等对产朊假丝酵母处理马铃薯淀粉废水的影响.结果表明.在pH为5.0、产朊假丝酵母接种量为10%(体积分数)、磷酸二氢钾(质量分散为0.1%)加入量为0.5 g/L、废水不灭菌的条件下,废水处理效果和产朊假丝酵母生长最佳.且当废水COD为5 074 mg/L时,COD去除率达到74.86%,同时可获得2.23g/L的单细胞蛋白.产朊假丝酵母处理马铃薯淀粉废水的最佳条件的实验研究对实现马铃薯淀粉废水资源化利用提供了理论参考.     

2种反应器中好氧颗粒污泥培养的比较研究

以絮状活性污泥为接种污泥,采用人工配制的模拟生活污水,分别在气提式序批反应器(SBAR)和序批式活性污泥反应器(SBR)中成功地培养出了成熟的好氧颗粒污泥.SBAR和SBR中的好氧颗粒污泥都具有稳定的基本形态结构,其微生物主要由杆菌和球菌组成,对COD的去除率可达到93%左右.对NH+4-N的去除率可达到98%以上.SBAR中好氧颗粒污泥的粒径主要分布、污泥体积指数(SVI)、比耗氧速率(SOUR)、TN去除率和TP去除率分别为0.45～2.00 mm、19.97 mL/g、47.68 g/(kg·h)、82%和65%;而SBR中好氧颗粒污泥的粒径主要分布、SVI、SOUR、TN去除率和TP去除率分别为0.18～1.00 mm、29.12 mL/g、43.21 g/(kg·h)、58%和50%.相对而言,SBAR更有利于好氧颗粒污泥的培养和运行.