Effects of bifenthrin on Daphnia magna during chronic toxicity test and the recovery test

IntroductionWiththedevelopmentandapplicationofnewpesticide ,insecticidehasgreatlyreducedtheharmofpesttocrops .Bifenthrinisaneffectivepyrethroidinsecticideandacaricideagainstawiderangeofinsectpests ,anditisverypoisonoustomammal,aquatic .Thisinsecticideiswi…     

Adsorption mechanism of phenolic compounds from aqueous solution on hypercrosslinked polymeric adsorbent

The adsorption of two phenols, namely, phenol and salicylic acid(SA) onto a water-compatible hypercrosslinked polymeric resin (NJ-8) were studied in terms of pseudo-second-order and first order mechanisms for chemical sorption as well as an intraparticle diffusion mechanism process. Kinetic analysis showed that the intraparticle diffusion process was the essential rate-controlling step. The activation energies of sorption have also been evaluated with the pseudo-second-order and intraparticle diffusion constants, respectively. Adsorption equilibrium data were well fitted by the Langmuir, Freundlich and Redlich-Peterson isotherms. Adsorption was exothermic and basically of a type of transition between physical and chemical character. The sorption capacity was higher for SA due to its more hydrophobic. Phenol has a higher adsorption enthalpy since it could form stronger hydrogen bonding on NJ-8.     

Rapid treatment of atrazine-contaminated water by nickel/iron bimetallic system

The utility of nickel/iron in the remediation of atraz.ine-contaminated water was investigated. The experimental results showed that nickel/iron had effective catalytic activity in dechlorinating atraz.ine under acidic conditions. The dechlonnation reaction approximately followed the first-order kinetics under the experimental conditions( nickel/iron: 1.0 g/250 ml: Ca~r~ = 20.0 mg/L), the reaction rate increased with decreasing pH value of the reaction solution and increasing the proportion of Ni: Fe within 2.95 %. For condition with 2.95% nickel/iron, the reaction rate constants were 0.07518( R = 0.9927), 0.06212( R = 0.9846) and 0.00131 min^-1 ( R = 0.9.565) at pH = 2.0, 3.0 and 4.0, respectively. HPLC analysis was used to monitor the decline of atraz.ine concentration.     

Multi-process and multi-pollutant control technology for ultra-low emissions in the iron and steel industry

The iron and steel industry is not only an important foundation of the national economy, but also the largest source of industrial air pollution. Due to the current status of emissions in the iron and steel industry, ultra-low pollutant emission control technology has been researched and developed. Liquid-phase proportion control technology has been developed for magnesian fluxed pellets, and a blast furnace smelting demonstration project has been established to use a high proportion of fluxed pellets (80%) for the first time in China to realize source emission reduction of SO₂ and NO_x. Based on the characteristics of high NO_x concentrations and the coexistence of multiple pollutants in coke oven flue gas, low-NO_x combustion coupled with multi-pollutant cooperative control technology with activated carbon was developed to achieve efficient removal of multiple pollutants and resource utilization of sulfur. Based on the characteristics of co-existing multiple pollutants in pellet flue gas, selective non-catalytic reduction (SNCR) coupled with ozone oxidation and spray drying adsorption (SDA) was developed, which significantly reduces the operating cost of the system. In the light of the high humidity and high alkalinity in flue gas, filter materials with high humidity resistance and corrosion resistance were manufactured, and an integrated pre-charged bag dust collector device was developed, which realized ultra-low emission of fine particles and reduced filtration resistance and energy consumption in the system. Through source emission reduction, process control and end-treatment technologies, five demonstration projects were built, providing a full set of technical solutions for ultra-low emissions of dust, SO₂, NO_x, SO₃, mercury and other pollutants, and offering technical support for the green development of the iron and steel industry.     

Progress in quantitative research on the relationship between atmospheric oxidation and air quality

Atmospheric oxidizing capacity (AOC) is an essential driving force of troposphere chemistry and self-cleaning, but the definition of AOC and its quantitative representation remain uncertain. Driven by national demand for air pollution control in recent years, Chinese scholars have carried out studies on theories of atmospheric chemistry and have made considerable progress in AOC research. This paper will give a brief review of these developments. First, AOC indexes were established that represent apparent atmospheric oxidizing ability (AOIe) and potential atmospheric oxidizing ability (AOIp) based on aspects of macrothermodynamics and microdynamics, respectively. A closed study refined the quantitative contributions of heterogeneous chemistry to AOC in Beijing, and these AOC methods were further applied in Beijing-Tianjin-Hebei and key areas across the country. In addition, the detection of ground or vertical profiles for atmospheric OH·, HO₂·, NO₃· radicals and reservoir molecules can now be obtained with domestic instruments in diverse environments. Moreover, laboratory smoke chamber simulations revealed heterogeneous processes involving reactions of O₃ and NO₂, which are typical oxidants in the surface/interface atmosphere, and the evolutionary and budgetary implications of atmospheric oxidants reacting under multispecies, multiphase and multi-interface conditions were obtained. Finally, based on the GRAPES-CUACE adjoint model improved by Chinese scholars, simulations of key substances affecting atmospheric oxidation and secondary organic and inorganic aerosol formation have been optimized. Normalized numerical simulations of AOIe and AOIp were performed, and regional coordination of AOC was adjusted. An optimized plan for controlling O₃ and PM_2.5 was analyzed by scenario simulation.     

Enhanced removal of high-As(Ⅲ) from Cl(-Ⅰ)-diluted SO4(-Ⅱ)-rich wastewater at pH 2.3 via mixed tooeleite and(Cl(-Ⅰ)-free) ferric arsenite hydroxychloride formation

An advanced cost-saving method of removal of high-As(Ⅲ) from SO₄(-Ⅱ)-rich metallurgi cal wastewater has been developed by diluting the SO₄(-Ⅱ) content with As(Ⅲ)-Cl(-Ⅰ)-rich metallurgical wastewater and then by the direct precipitation of As(Ⅲ) with Fe(Ⅲ) at pH2.3.As(Ⅲ) removal at various SO₄(-Ⅱ)/Cl(-Ⅰ) molar ratios and temperatures was investigated The results showed that 65.2–98.2%of As(III) immobilization into solids occurred at the SO₄(Ⅱ)/Cl(-Ⅰ) mo...     

直岗拉卡水电站工程生态环境的影响分析

直岗拉卡水电站地处青藏高原,是黄河上游第4个梯级电站,工程所处区域属生态环境十分敏感和脆弱的青藏高原。论文在阐述直岗拉卡水电站工程影响区生态环境基本特征的基础上,度量了该区域生物多样性及电站运行后对生态环境的影响程度,提出了相关对策。分析表明,直岗拉卡水电站工程在实施严格的环境保护措施后对生态环境的影响是可以接受的。     

顶部折壁式声屏障插入损失的预估方法研究

目前工程上常用的计算声屏障插入损失的方法是基于波动理论的近似方法 ,一般主要是验算性质的 ,很难实现声屏障的优化设计。在此采用边界元方法对顶部折壁式声屏障的插入损失进行数值模拟 ,得到不同参数下的声屏障插入损失预估结果。该方法不但可以方便地预估出声屏障的插入损失 ,而且可以根据实际要求对声屏障折壁角的参数进行优化设计 ,为工程应用提供一种有效的设计依据。     

小区域污水处理的多目标规划设计探讨

随着城市的不断发展 ,污水处理厂的规模、承受的负荷也不断增大。对小区污水处理设施进行规划设计已越来越重要。以生活小区为例 ,利用多目标灰色决策进行工艺选择 ,使处理设施达到社会、环境、经济效益的优化结合     

CO还原NO海泡石铜族金属催化剂的研究

以改性海泡石为载体,负载IB族金属(Cu,Ag,Au),制备CO还原NO的催化剂.用正交实验确定载体海泡石的改性条件.研究考察该催化剂在有氧条件下的催化还原性能,并用XRD、TGA、H2 TPR、BET等对该催化剂进行表征.研究发现,在有氧条件下,IB族金属(Cu,Ag,Au)催化剂中,Cu 海泡石对CO还原NO反应的催化活性最好;Cu负载量为5%、灼烧温度为400℃的催化剂表现出较高的活性;Cu 海泡石催化剂中加入Ce和Sm可以改善催化剂的性能.在实验条件基本相同的情况下,Cu 海泡石的催化活性好于Cu ZSM 5催化剂.