Vapor-Phase and Fine Particulate Matter Concentrations of Polycyclic Aromatic Hydrocarbons Measured during the Winter Months in a Northern Rocky Mountain Urban Airshed

Abstract

A fine particulate matter (PM_2.5) sampling program was conducted in Missoula, MT, to investigate both the particle and vapor phases of PM_2.5-associated polycyclic aromatic hydrocarbons (PAHs) found in a northern Rocky Mountain urban airshed. Twenty-four-hour samples were collected during the cold winter months of January through April 2002, when many of the more volatile organic components of PM_2.5 were expected to be found in the condensed particle form. To meet analytical detection limits, each of the 12 individual sample days were aggregated into four total filter and polyurethane foam (PUF) samples, respectively, with each aggregate containing 3 sample days. Quartz filter (particle-phase PAHs) and PUF (vapor-phase PAHs) aggregates were analyzed separately for 18 individual PAHs and phenolics by gas chromatography/mass spectrometry. Results showed that 87% of the PM_2.5-associated phenolics and PAHs measured in this study were found in the vapor phase. PM_2.5-associated gas/particle partition coefficients (K_p,2.5) ranged from 0 for the lighter phenolics and PAHs to ~0.1 for some of the heavier PAHs, such as fluoranthene and pyrene. Calculating K_p,2.5 for the heaviest measured PAHs was not feasible because of low or undetectable concentrations in the vapor phases of these compounds. Phenolics and two-ringed and three-ringed PAHs were found almost exclusively in the vapor phase. Four-ringed PAHs were distributed between the particle and vapor phases, with more mass measured in the vapor phase. Very little five-ringed and higher PAHs were measured from either the filter or PUF sampling medium. These results provide information on both the concentrations and different phases of PM_2.5-associated PAHs measured during the winter months in a northern Rocky Mountain urban airshed, when concentrations of PM_2.5 are generally at their highest compared with the rest of the year.     

The Effect of Masterbatch Addition on the Mechanical, Thermal, Optical and Surface Properties of Poly(lactic acid)

There has been considerable interest in the use of the biodegradable polymer poly(lactic acid) (PLA) as a replacement for petroleum derived polymers due to ease of processability and its high mechanical strength. Other material properties have however limited its wider application. These include its brittle properties, low impact strength and yellow tint. In an attempt to overcome these drawbacks, PLA was blended with four commercially available additives, commonly known as masterbatches. The effect of the addition of 1.5 wt% of the four masterbatches on the mechanical, thermal, optical and surface properties of the polymer was evaluated. All four masterbatches had a slight negative effect on the tensile strength of PLA (3–5% reduction). There was a four fold increase in impact resistance however with the addition of one of the masterbatches. Differential scanning calorimetry demonstrated that this increase corresponded to a decrease in the polymer crystallinity. However there was an associated increase in polymer haze with the addition of this masterbatch. The clarity of PLA was improved through the addition of an optical brightener masterbatch, but the impact resistance remained low. The glass transition and melting temperatures of PLA were not affected by the addition of the masterbatches, and no change was observed in surface energy. Some delay in PLA degradation, in a PBS degradation medium at 50 °C, was observed due to blending with these masterbatches.     

Patterns,correlates, and paternity consequences of extraterritorial foray behavior in the field sparrow (Spizella pusilla): an automated telemetry approach

Behavioral Ecology and Sociobiology - ᅟMales of fiddler crabs (genus: Uca) construct courtship structures using mud or sand to attract mate-searching females for underground mating. A sensory...     

Elevated levels of nitrogen and phosphorus reduce fertilisation success of gametes from scleractinian reef corals

Spawned gametes were collected from colonies of Acropora longicyathus at One Tree Island and Goniastrea aspera at Magnetic Island, Great Barrier Reef, Australia, for use in fertilisation trials. Mean fertilisation rates were significantly reduced compared with controls (P<0.003), when gametes from the branching coral A. longicyathus were exposed to elevated ammonium concentrations at 1 µM and above in one cross (60-64% reduction), and at 100 µM in another cross (16% reduction). Mean fertilisation success of A. longicyathus gametes was also significantly reduced compared with controls in both crosses (P=0.000) at concentrations of 1 µM phosphate and above (35-75% reduction), and at 1 µM ammonium plus 1 µM phosphate and all higher concentrations (68-74% reduction). Similarly, the mean percentage of regular embryos that were developing normally was significantly reduced in most nutrient treatments compared with controls (P=0.000). Fertilisation trials using gametes from the brain coral G. aspera resulted in a significantly lower percentage of regular embryos (P=0.001) and a significantly higher percentage of deformed embryos (P=0.001) developing after exposure to elevated nutrient treatments compared with controls. Mean fertilisation rates for this species were only significantly reduced (P=0.034) in the 50 µM ammonium plus phosphate treatment in one cross (8% reduction), compared with the control. Therefore, ammonium and phosphate enrichment significantly impairs fertilisation success and embryo development in scleractinian reef corals.     

Population structure of yellowfin tuna (Thunnus albacares) in the western Pacific Ocean, inferred from microsatellite loci

Five polymorphic microsatellite loci were examined in 1391 yellowfin tuna (Thunnus albacares) from eight regions of the western (Coral Sea, eastern Australia, Fiji, Indonesia, Philippines and Solomon Islands) and eastern (California and Mexico ) Pacific Ocean. Across all samples, numbers of alleles per locus ranged from 7 to 30 (mean: 17.0), and observed heterozygosities per locus ranged from 0.223 to 0.955 (mean: 0.593). Temporal collections were available for three areas: no significant temporal heterogeneity was observed for the Coral Sea (1991/1992 and 1995/1996 collections) or eastern Australia (1994/1995, 1995/1996, 1996/1997 and 1997/1998), but there was slight but significant heterogeneity at one locus (cmrTa-161) between the two Philippines collections (1994/1995 and 1996/1997). Genotypes generally showed a good fit to Hardy-Weinberg expectations within populations; only cmrTa-208 in the pooled Coral Sea population gave a significant deviation after Bonferroni correction for 40 tests, with a small but significant excess of homozygotes. Four loci showed no evidence of population differentiation following contingency Chi-squared and F_ST analyses. The fifth locus, cmrTa-161, showed small but significant differentiation (F_ST=0.002, P<0.001). This heterogeneity was largely a result of the Philippines 1994/1995 and Fiji collections; there was no correlation with geographic distance. The average F_ST across all five loci was very low (F_ST=0.002), but it was significant (P<0.001). It is unclear whether this low but significant differentiation reflects noise in the dataset, perhaps arising from experimental error, or real population differentiation. The finding of very limited population heterogeneity accords with most of the earlier allozyme and mitochondrial DNA studies of yellowfin tuna in the Pacific Ocean.     

Trampling Impacts on Thermotolerant Vegetation of Geothermal Areas in New Zealand

Geothermal features such as geysers, mud pools, sinter terraces, fumaroles, hot springs, and steaming ground are natural attractions often visited by tourists. Visitation rates for such areas in the Taupo Volcanic Zone of New Zealand are in the order of hundreds of thousands annually. These areas are also habitat for rare and specialized plant and microbial communities that live in the steam-heated soils of unusual chemical composition. We evaluated historical and current trampling impacts of tourists on the thermotolerant vegetation of the Waimangu and Waiotapu geothermal areas near Rotorua, and compared the results to experimental trampling at a third site (Taheke) not used by tourists. Historical tourism has removed vegetation and soil from around key features, and remaining subsoil is compacted into an impervious pavement on which vegetation recolonization is unlikely in the short term. Social tracks made by tourists were present at both tourist sites often leading them onto hotter soils than constructed tracks. Vegetation height and cover were lower on and adjacent to social tracks than further from them. Thermotolerant vegetation showed extremely low resistance to experimental trampling. This confirms and extends previous research that also shows that thallophytes and woody shrubs, life forms that dominate in thermotolerant vegetation, are vulnerable to trampling damage. Preservation of these vulnerable ecosystems must ensure that tourist traffic is confined to existing tracks or boardwalks, and active restoration of impacted sites may be warranted.     

Assessment of space utilisation in a subtidal temperate bryozoan community

On subtidal hard substrata, Bryozoa are often very abundant, both in terms of numbers of colonies and numbers of species. To investigate how so many species are able to co-exist, often in close proximity to each other, subtidal material was dredged from an area of bryozoan-rich coarse shelly sea-bed off the south-west of the Isle of Man (British Isles) in autumn 1984 and 1985. A survey was performed on the distribution of colonies of eight common, encrusting cheilostome bryozoan species across the surfaces of four types of empty, disarticulated bivalve shells. Each species was found to be significantly commoner on certain substratum types such as rough surfaces or inner concave surfaces. Fenestrulina malusii (Audouin) showed a further, more specific, tendency to be signficantly more abundant on the grooves of the corrugated inner surfaces of left valves of Pecten maximus (L.). In general however there was much overlap in distribution and it is proposed that such large numbers of species are able to co-exist because of the evolution of different life-history strategies ensuring that each species uses the available temporally and spatially heterogenous substrata in subtly different ways; some species, for example, occupying substrata that are optimal to bryozoan growth and other species, by reaching maturity earlier, being able to inhabit more ephemeral suboptimal substrata.     

Chemical extraction methods to assess bioavailable arsenic in soil and solid media

Soil ingestion by children is an important pathway in assessing public health risks associated with exposure to arsenic-contaminated soils. Soil chemical methods are available to extract various pools of soil arsenic, but their ability to measure bioavailable arsenic from soil ingestion is unknown. Arsenic extracted by five commonly used soil extractants was compared with bioavailable arsenic measured in vivo by immature swine (Sus scrofa) dosing trials. Fifteen contaminated soils that contained 233 to 17 500 mg kg(-1) arsenic were studied. Soil extractants were selected to dissolve surficially adsorbed and/or readily soluble arsenic (water, 1 M sodium acetate, 0.1 M Na2HPO4/0.1 M NaH2PO4) and arsenic in Fe and Mn oxide minerals (hydroxylamine hydrochloride, ammonium oxalate). The mean percent of total arsenic extracted was: ammonium oxalate (53.6%) > or = hydroxylamine hydrochloride (51.7%) > phosphate (10.5%), acetate (7.16%) > water (0.15%). The strongest relationship between arsenic determined by soil chemical extraction and in vivo bioavailable arsenic was found for hydroxylamine hydrochloride extractant (r = 0.88, significant at the 0.01 probability level). Comparison of the amount of arsenic extracted by soil methods with bioavailable arsenic showed the following trend: ammonium oxalate, hydroxylamine hydrochloride > in vivo > phosphate, acetate > water. The amount of arsenic dissolved in the stomach (potentially bioavailable) is between surficially adsorbed (extracted by phosphate or acetate) and surficially adsorbed + nonsurficial forms in Fe and Mn oxides (extracted by hydroxylamine hydrochloride or ammonium oxalate). Soil extraction methods that dissolve some of the amorphous Fe, such as hydroxylamine hydrochloride, can be designed to provide closer estimates of bioavailable arsenic.     

The Information Cycle as a Framework for Defining Information Goals for Water-Quality Monitoring

/ The necessity to tailor information becomes increasingly urgent as the information revolution continues to generate ever-increasing flows of data and so-called information. From European experiences, a new approach for monitoring system design is suggested in this paper. In this approach, careful and detailed specification of information needs is a major contributing factor to the effectiveness of information products. To develop better specifications for information products, the process of collecting and transforming data into useful information requires careful thought and guidance. A dialogue between information users on one hand and information producers on the other is essential. This dialogue can be based on the information cycle, describing the continuous process from specifying information needs for water management and a strategy to collect information through data collection and data analysis up to utilization of information by water management. By following the respective steps in the information cycle, the process of information gathering can be completed. The cyclic character provides a quantitative means of connecting monitoring system design and operations with the information expectations and/or products required by management.