Simulating Soil Water Content,Evapotranspiration, and Yield of Variably Irrigated Grain Sorghum Using AquaCrop

Use of models to simulate crop production has become important in optimizing irrigation management in arid and semiarid regions. However, applicability and performance of these models differ across regions, due to differences in environmental and management factors. The AquaCrop model was used to simulate soil water content (SWC), evapotranspiration (ET), and yield for grain sorghum under different irrigation regimes and dryland conditions at two sites in Central and Southern High Plains. Prediction error (P_e), estimated as the difference between simulated and measured divided by measured, for SWC ranged from ?17% to 4% in fully irrigated, ?3% to ?10% in limited irrigated, and ?16% to 25% in dryland treatments. The P_e within ±4%, ?5%, and ?17% to 24% were attained for seasonal ET under fully irrigated, limited irrigated, and dryland conditions, respectively. P_e values for grain yield were within those previously reported and ranged from ?10% to 12%, ?12% to 7%, and 9% to 17% for fully irrigated, limited irrigated and dryland conditions, respectively. Overall performance of the AquaCrop model showed it could be used as an effective tool for evaluating the impacts of variable crop and irrigation managements on the production of grain sorghum in the study area. Finally, the application of the model in the study area revealed planting date has a significant impact on sorghum yield and irrigation requirements, but the impact of planting density was negligible. Editor's note : This paper is part of the featured series on Optimizing Ogallala Aquifer Water Use to Sustain Food Systems. See the February 2019 issue for the introduction and background to the series.     

Urban Domestic Gardens: The Effects of Human Interventions on Garden Composition

Private domestic gardens contribute substantially to the biodiversity of urban areas and benefit human health and well-being. We previously reported a study of 267 gardens across five cities in the United Kingdom in which variation in geographical and climatic factors had little bearing on the richness, diversity and composition of plant species. We therefore hypothesise that garden management is an important factor in determining garden characteristics. Here, from the same sample of gardens, we investigate potential associations between the uses to which people put their gardens, the types of management activities they undertake, and the characteristics of those gardens. Householders (n = 265) completed a questionnaire detailing various aspects of garden use and management activities. The majority of respondents used their gardens chiefly for relaxation, recreation, and eating. Fewer than one fifth included “gardening” amongst their garden uses even though all performed some garden management, suggesting that not all management activity resulted from an interest in gardening. Garden-watering and lawn-mowing were the most prevalent activities and were predictors of other types of management including weeding, vegetation-cutting, leaf-collection, and dead-heading flowers. A number of these activities were associated with one another, the richness and composition of plant species, and the number of land uses in gardens. However, relationships between management activities and the amount of tall vegetation were less consistent, and garden management appeared to be independent of garden area. More species of amphibians, birds, and mammals were observed in gardens with ponds and in which efforts were made to attract wildlife, particularly by providing drinking water. This study supports the hypothesis that garden use and management is associated with garden characteristics.     

Nonredundancy in the dispersal network of a generalist tropical forest tree

Plant species with generalized dispersal mutualisms are considered to be robust to local frugivore extinctions because of redundancy between dispersal agents. However, real redundancy can only occur if frugivores have similar foraging and ranging patterns and if fruit is a limiting resource. We evaluated the quantitative and qualitative contributions of seed dispersers for an endochorus mast-fruiting species, Prunus javanica (Rosaceae) in Khao Yai National Park, Thailand, to evaluate the potential redundancy of dispersers. Data were collected from tree watches, seed/fruit traps, and seed transects under and away from fruiting trees, feeding and seed deposition by gibbons (Hylobates lar), and evaluations of seed and first-year seedling survival. We identified three clusters of dispersers within the network. Most (>80%) frugivore species observed were small birds and squirrels that were not functional dispersers, dropping most seeds under or very near the tree crown, where seedling survival was ultimately nil. Monkeys (Macaca leonina) were low-quality, short-range dispersers, but they dispersed large numbers of seeds and were responsible for 67% of surviving first-year seedlings. Gibbons and Oriental Pied Hornbills (Anthracoceros albirostris) handled few fruits, but they provided the highest quality service by carrying most seeds away from the canopy to medium and long distances, respectively. Although there was overlap in the deposition patterns of the functional dispersers, they displayed complementary, rather than redundant, roles in seed dispersal. Satiation of all functional dispersers further limited their capacity to "replace" one another. Redundancy must be evaluated at the community level because each type of disperser may shift to different species in the non-masting years of P. javanica. Our results underscore the need for research on broader spatial and temporal scales, which combines studies of dispersal and plant recruitment, to better understand mechanisms that maintain network stability.     

Advanced REACH Tool (ART): calibration of the mechanistic model

The mechanistic model of the Advanced Reach Tool (ART) provides a relative ranking of exposure levels from different scenarios. The objectives of the calibration described in this paper are threefold: to study whether the mechanistic model scores are accurately ranked in relation to exposure measurements; to enable the mechanistic model to estimate actual exposure levels rather than relative scores; and to provide a method of quantifying model uncertainty. Stringent data quality guidelines were applied to the collated data. Linear mixed effects models were used to evaluate the association between relative ART model scores and measurements. A random scenario and company component of variance were introduced to reflect the model uncertainty. Stratified analyses were conducted for different forms of exposure (abrasive dust, dust, vapours and mists). In total more than 2000 good quality measurements were available for the calibration of the mechanistic model. The calibration showed that after calibration the mechanistic model of ART was able to estimate geometric mean (GM) exposure levels with 90% confidence for a given scenario to lie within a factor between two and six of the measured GM depending upon the form of exposure.     

Submesoscale distribution of Antarctic krill and its avian and pinniped predators before and after a near gale

We conducted two ship-based surveys of the nearshore ecosystem north of Livingston Island, Antarctica during 2–10 February 2005. Between the two surveys, a low-pressure system (963 mbar) passed through the area providing the opportunity to measure ecosystem parameters before and after a near gale. A ship-based multiple-frequency acoustic-backscatter survey was used to assess the distribution and relative abundance of Antarctic krill (Euphausia superba). Net tows, hydrographic profiles, and meteorological data were collected to measure biological and physical processes that might affect the krill population. During the survey, the distribution and behavior of several krill predators [chinstrap penguins (Pygoscelis antarctica), cape petrels (Daption capense), and Antarctic fur seals (Arctocephalus gazella)] were measured from the vessel by visual observations. The survey encompassed an area of roughly 2,500 km², containing two submarine canyons with one to the west and one to the east of Cape Shirreff, which had different abundances of krill and predators. Several aspects of the nearshore ecosystem changed after the near gale including: hydrography of the upper 100 m of the water column, phytoplankton biomass, the abundance and distribution of krill, and the distribution of some krill predators. Differences in these parameters were also measured between the two canyons. These changes in the physical and biological environment during the survey period are quantified and show that the ecosystem exhibited significant changes over relatively short spatial (tens of kilometers) and time (tens of hours) scales.     

OPTIMIZATION OF INTERMITTENT PUMPING SCHEDULES FOR AQUIFER REMEDIATION USING A GENETIC ALGORITHM1

ABSTRACT: Using a genetic algorithm (GA), optimal intermittent pumping schedules were established to simulate pump‐and‐treat remediation of a contaminated aquifer with known hydraulic limitations and a water miscible contaminant, located within the Duke Forest in Durham, North Carolina. The objectives of the optimization model were to minimize total costs, minimize health risks, and maximize the amount of contaminant removed from the aquifer. Stochastic ground water and contaminant transport models were required to provide estimates of contaminant concentrations at pumping wells. Optimization model simulations defined a tradeoff curve between the pumping cost and the amount of contaminant extracted from the aquifer. For this specific aquifer/miscible contaminant combination, the model simulations indicated that pump‐and‐treat remediation using intermittent pumping schedules for each pumping well produced significant reductions in predicted contaminant concentrations and associated health risks at a reasonable cost, after a remediation time of two years.     

Protected Areas for the Future: Models from the Past

This paper discusses the complexity of the protected area mosaic that has evolved in the United Kingdom over the past 40 or so years. Experimental matrices have been used to assist in the analysis of the various types of protected areas. The trend has been towards the development of protected areas to serve multiple objectives, although categories of protected area introduced under European legislation are more narrowly defined. There has been a proliferation in the number of categories of protected area in the past ten years; since 1990 six new categories of protected area have been established, two resulting from European directives. Most of the protected areas operate indirectly through the planning system and/or voluntary agreements. However, a distinction is drawn between systems for nature conservation and landscape protection with the former relying more on direct controls (ownership and/or legal force). There is considerable potential overlap of protected areas. New categories of protected area have often been superimposed upon the existing system without consideration of whether they will result in duplication of effort, expenditure etc. We conclude that there is scope for some rationalization of the system. Ideally this would involve replacing existing protected areas with broader based ones but considerable simplification could be obtained in practice by making the powers of the agencies more flexible and changing the administrative arrangements for managing the various protected areas.     

Developing a decision support tool for life-cycle cost assessments

Recent years have seen advancements in the development and use of life-cycle assessment (LCA) analytic techniques. Although these techniques have highlighted the power of LCA to identify the environmental consequences of a product system through its entire life cycle, they have also highlighted a major shortcoming of LCA—the lack of cost information. Because companies make daily decisions that involve trade-offs between economics and the environment, including cost information in LCA is critical for advancing its use as an overall environmental decision-making tool. This article outlines the current state of LCA methodology development, defines key life-cycle cost assessment terms and concepts, and evaluates existing cost assessment techniques with the objective of building an integrated life-cycle cost assessment tool.     

A trait specific model of competition in a spatially structured plant community

The non-random dispersal of plant propagules is thought to counter competitive exclusion and thus promote the survival of competitively inferior species. We investigated this process by modelling the outcome of interactions between species with competitive ability defined as a function of both life-history traits and the environment with both random and clustered dispersal strategies and in environmentally homogeneous and heterogeneous environments. Four main results emerged: (1) environmental heterogeneity was seen to promote co-existence in conjunction with associated trait variation for tolerance to the environmental variable and where this trait variation was effectively limited by ‘trade-off’ such that no single species had an overall competitive advantage, (2) consistent with theory, random dispersal appeared to enhance the likelihood of competitive exclusion, whereas clustering favoured co-existence, (3) the ecological outcome of interactions between dispersal and competitive relationships varied as a function of the trait determining the competitive advantage within a particular environment, and (4) promotion of co-existence by clustered dispersal was most marked when associated with environmental heterogeneity. It is argued that these results suggest that current ecological models of species interactions may need to be modified to incorporate a more realistic understanding of competitive ability if we are to better understand the factors effecting species co-existence.