An application of 3D gasdynamic modeling for the prediction of overpressures in vented enclosures

A three-dimensional gasdynamic model with constant burning rate is applied for the prediction of the maximum pressure rise from gaseous combustion in vented enclosures. A series of calculations for an enclosure with aspect ratio close to unity are presented. Both cases with and without obstacles in the enclosure are considered. Results of calculations are compared with a simple 0D solution for spherical vessels. It is shown that, in cases without obstacles, the 0D solution for the maximum reduced overpressures is close to the predictions of the detailed modeling. In cases with obstacles, the detailed simulation gives significantly higher overpressures than those from the 0D model. However, in all the cases the reduced pressures are correlated well with the maximum flame surface area.     

Fire and explosion risk assessment for large-scale oil export terminal

Now in Russian Federation and other countries large-scale oil terminals (volume of one tank exceeds 100 000 m³, total volume of tanks exceeds 300 000 m³) are designed and constructed. Therefore fire safety of such objects becomes a very important task, solution of which is hardly possible without detail fire risk assessment. This study is aimed to a solution of this problem. Potential, individual and social risks were calculated. The potential risk was defined as a frequency of occurrence of hazardous factors of fires and explosions in a given point of space (the so-called risk contours). The individual risk was defined as a frequency of injuring a given person by hazardous factors of fires and explosions. Time of presence of this person in hazardous zones (near the hazardous installation) is taken into account during calculations of the individual risk. Social risk was defined as a dependence of frequency of injuring a given number of people by hazardous factors of fires and explosions on this number. In practice the social risk is usually determined on injuring not less than 10 people.

The oil terminal under consideration includes the following main parts: crude oil storage consisting of three tanks of volume 100 000 m³ each, input crude oil pipeline of diameter 0.6 m, crude oil pumps, output crude oil pipeline of diameter 0.8 m, auxiliary buildings and facilities. The following main scenarios of tank fires have been considered: rim seal fire, pool fire on a surface of a floating roof, pool fire on a total cross-section surface of the tank, pool fire in a dyke, explosions in closed or semiclosed volumes. Fires and explosions in other parts of the terminal are also taken into account. Effects of escalation of accidents are considered.

Risk contours have been calculated both for the territory of the terminal and for the neighbouring space. The potential risk for the storage zone is near 10⁻⁴–10⁻⁵ year⁻¹, and at a distance 500 m from the terminal the potential risk values do not exceed 10⁻⁶ year⁻¹. The values of the individual risk for various categories of workers are in the range of 10⁻⁵–10⁻⁶ year⁻¹. Because of low number of the workers on the terminal and large distances to towns and villages the social risk value is negligible. These risk values are consistent with practice of the best oil companies, and fire hazard level of the terminal can be accepted as tolerable.     

Influence of the oxide content on the ignition energies of aluminium powders

Some results of determination of ignition energies for an aluminium powder with various oxide contents are presented. Common use of processes like high-speed cutting produce explosive dust clouds, so that we focused this study on hazard of metallic powders. An industrial aluminium powder has been used for this work. An original process, based on the principle of electrochemical anodisation, has been developed to increase, under control, the oxide coating of particles.

The sensitivity study to spark ignition was performed in an Hartmann explosion tube of 1.3L. The Langlie test method was applied to evaluate the energies leading to a probability of ignition of 50% (E₅₀) of the selected samples. The results confirm that the ignition energies increase with the oxide content of the powder.     

THE IMPACT OF HIGH INTEREST RATES ON OPTIMUM MULTIPLE OBJECTIVE DESIGN OF SURFACE RUNOFF URBAN DRAINAGE SYSTEMS1

ABSTRACT. This research examines the impact of high rates of interest upon the least cost system design for urban drainage systems when water quality is a critical parameter. Results of examination of twelve alternative system designs in a case study watershed indicate the least cost study design is highly sensitive to the rate of interest, but not sensitive to the water quality parameters. When the high rates of interest currently prevalent are introduced into the model those systems which contain open channel collection components are selected as the least cost system. At low rates of interest pipeline collection components are selected as the least cost system. Holding pond components of system design are cost effective at several levels of water quality. They are neutral to the rate of interest so they are incorporated in least cost systems at all the levels of interest rates. The results of the study indicate that at the current high rates of interest open channel collection systems and holding ponds are cost effective system components to achieve selected levels of water quality in urban drainage system design.     

COMPARATIVE EVALUATION OF THREE URBAN RUNOFF MODELS1

ABSTRACT: Three urban runoff models, namely, the Road Research Laboratory Model (RRLM), the Storm Water Management Model (SWMM) and the University of Cincinnati Urban Runoff Model (UCURM), were examined by comparing the model simulated hydrographs with the hydrographs measured on several instrumented urban watersheds. This comparison was done for the hydrograph peak points as well as for the entire hydrographs using such statistical measures as the correlation coefficient, the special correlation coefficient and the integral square error. The results of the study indicated that, when applying the three selected non-calibrated models on small urban catchments, the SWM model performed marginally better than the RRL model and both these models were more accurate than the UCUR model. On larger watersheds, the comparisons between the SWM model and the other two models would be likely even more favourable for the SWM model, because it has the most advanced flow routing scheme among the studied models.     

ANALYSIS OF NEW TECHNIQUES FOR PUBLIC INVOLVEMENT IN WATER PLANNING1

ABSTRACT: The growing demands by the public for a more active role in planning have recently generated considerable interest among researchers and planners in the subject of public involvement techniques. Numerous surveys have found that standard public participation techniques (e.g., public hearings) by themselves are considered inadequate. Several techniques that have potential for overcoming some of the limitations of standard public involvement techniques have recently been developed. This paper describes several of these new techniques and analyzes each of them in terms of their potential utility in water resources planning.     

Trail erosion patterns in Great Smoky Mountains National Park

All the maintained trails in Great Smoky Mountains National Park were surveyed for width, depth, and a variety of types of erosion. Trail erosion is related to a number of environmental variables, including vegetation type, elevation, trail slope, and section of the park. Open grass balds and spruce-fir forest are the most erosion-sensitive plant communities, and the xeric oak and pine types are the least sensitive. Trails in virgin or mature forest tend to be in poorer condition than those in successional areas. The most important physical factor is the slope of the trail.Trails in the Tennessee district are in slightly poorer condition, on the average, than those in the North Carolina district, but the Appalachian Trail is more eroded than either. A poor section of the park may have ten times the erosion of a good section. On an allpark basis, water erosion is the most important problem, with 15% of the trail surface affected.A comparison of visitation patterns with trail condition indicates that redistribution of use would help to mitigate some erosion problems. Because trail condition is correlated to physical environmental factors, however, some sites will require intensive maintenance, even if visitation is low.The data from this survey have already been used in environmental analysis of proposed developments within the park and can be applied to long-range planning for the park trail system as a whole.     

Sample intake position and loading rates from nonpoint source pollution

Paired water samples were simultaneously activated from two different vertical positions within the approach section of a flow-control structure to determine the effect of sample intake position on nonpoint runoff parameter concentrations and subsequent event loads. Suspended solids (SS), total phosphorus (TP) and organic plus exchangeable nitrogen [(Or+Ex)-N] were consistently higher throughout each runoff event when sampled from the floor of the approach section as opposed to those samples taken at midstage. Dissolved molybdate reactive phosphorus (DMRP) and ammonium (NH₄-N) concentrations did not appear to be significantly affected by the vertical difference in intake position. However, the nitrate plus nitrite nitrogen [(NO₃+NO₂)-N] concentrations were much higher when sampled from the midstage position.Although the concentration differences between the two methods were not appreciable, when evaluated in terms of event loads, discrepancies were evident for all parameters. Midstage sampling produced event loads for SS, TP, (Or + Ex)–N, DMRP, NH₄-N, and (NO₃+NO₂)-N that were 44,39,35,80,71, and 181%, respectively, of floor sampling loads. Differences in loads between the two methods are attributed to the midstage position, sampling less of the bed load. The correct position will depend on the objective; however, such differences should be recognized during the design phase of the monitoring program.This work was supported by the Soil Science Department, College of Agriculture and Life Sciences, University of Wisconsin-Madison, and by the U.S. Environmental Protection Agency, Region V., Chicago, Illinois (Grant No. G005139-01).     

Technetium: A toxic waste product of the nuclear fuel cycle: Effects on soybean growth and development

Technetium-99 (⁹⁹Tc) is formed in significant amounts (6.2% fission yield) during fission in both nuclear reactors and nuclear bombs. The effects of technetium on soybeans (Glycine max) were studied in relation to (a) cytochemical events in the apical meristems of germinating seedlings; (b) growth responses to 0, 0.04, 0.2, 1.0, 5.0, and 20.0 ppm Tc; (c) growth responses to varying levels of Tc after a prior 5-day germination on Tc-free media, and (d) response to Tc in the presence of added manganese.By 20 days, reductions in growth were evident at all levels of Tc except 0.04 ppm (Experiment 2). Root growth was most severely affected, and seedling abnormality at 20 ppm was fivefold greater than that of the controls. The effect of 20 ppm Tc was evident at 10 days when the accumulated absorption dose was approximately 25 rads. The first evidence of damage at this dose was a delay in the initiation of the first trifoliate leaf. The shoot meristem size was 1.2-fold smaller than that of the control; however, there was no cytological evidence of radiation-induced damage. Observation of mitotic figures did not reveal any chromosome aberrations, micronuclei, or chromosome bridges. The lowest level of Tc showing toxicity was 0.2 ppm which resulted in a 31% reduction in growth at 20 days. The accumulated dose was 0.5 rad (0.025 rad/day) and thus it seems unlikely that the rapid inhibition of growth and development is due to radiological toxicity. It is quite probable that the growth effects are due to chemical toxicity possibly due to nutrient competition and/or substitution in uptake or metabolism. However, extremely low doses of radiation have been shown to delay the onset of DNA synthesis (possibly by membrane effects) inTradescantia and until the actual mechanism of Tc inhibition is determined a radiation effect cannot be totally ruled out.This research was partially supported by ERDA Contract EY-76-S-02-4139