Nitrogen Oxide Flux from an Agricultural Soil During Winter Fallow in the Upper Coastal Plain of North Carolina,U.S.A.

Abstract

Incorporation of the remaining crop residue, including the root system, of grain (soybean and corn) and fiber (cotton) crops into the soil following harvest is a common agricultural practice. The crop residue represents a substantial portion of nitrogen initially applied as fertilizer, and thus is a potential source of nitrogen for NO emissions during the winter fallow period. Fluxes of NO and NO₂ were measured from fallow fields from February 7 to March 23, 1994, using a dynamic chamber technique (ambient air as the carrier gas). Average NO flux rates, as a function of previous crop residue, were 9.2 (range –4.2 to 76) ng–N m^–2 s^–1 for soybean, 6.1 (range –11.7 to 110) ng–N m^–2 s^–1 for cotton, and 4.7 (range –0.2 to 40) ng–N m^–2 s^–1 for corn. Maximum NO fluxes were observed in mid–morning when soil temperatures were lowest. Minimum NO flux occurred after mid–afternoon when soil temperature reached a maximum. The decrease in NO flux with increase in soil temperature (5 cm depth) reflected the existence of a NO compensation concentration (i.e., the rate for the NO consumption reactions continued to increase with increase in temperature). NO₂ deposition was calculated for 92% of the data points, with no trend in deposition between the three fields and their corresponding crop residue. These results indicate that significant fluxes of NO are generated from fallow agricultural fields following incorporation of the residue from the previous crop.     

Influence of decomposition on chemical properties of plant- and manure-derived dissolved organic matter and sorption to goethite

Sorption of dissolved organic matter (DOM) plays an important role in maintaining the fertility and quality of soils in agricultural ecosystems. Few studies have examined the effects of decomposition on DOM sorption and chemical characteristics. This study investigated the sorption to goethite (alpha-FeOOH) of fresh and decomposed hydrophilic (HPL) and hydrophobic (HPB) DOM fractions extracted from the shoots and roots of crimson clover (Trifolium incarnatum L.), corn (Zea mays L.), soybean [Glycine max (L.) Merr.], hairy vetch (Vicia villosa L.), and dairy and poultry manures. Sorption was positively related to apparent molecular weight (MWAP), aromaticity as measured by absorptivity at 280 nm, and phenolic acid content. A 10-d laboratory microbial decomposition of the source organic matter generally increased the sorption of the extracted DOM onto goethite. The decomposition effect on sorption was greater for the HPL fractions than for the HPB fractions. There was a decrease in the MWAP values of the DOM samples following sorption to goethite. In many cases the reduction in MWAP was large, indicating a strong preference by goethite for the higher MWAP DOM fractions. The results of this laboratory-based research demonstrate that microbial processes affect the chemical characteristics of DOM which may affect the distribution of soil organic C pools.     

Polycyclic aromatic hydrocarbons in sediments and associated benthos in Lake Erie

Polycyclic aromatic hydrocarbons (PAH) were analyzed in surficial sediments and benthic organisms in southwestern Lake Erie near a large coal fired power plant. Sediment concentrations (530–770 ppb PAH) were relatively homogenous throughout most of the 150 km² area, although river and nearshore concentrations reached nearly 4 ppm. Oligochaete worms and chironomid midges were near equilibrium with local sediments except for enhanced concentrations in nearshore midges.     

Anion and cation leaching or desorption from activated carbons from municipal sludge and poultry manure as affected by pH.

The conversion of municipal sludge and poultry manure to activated carbon results in a significant ash fraction that contains several different anions and cations. The objectives of this study were to determine whether the select ions are released or leached from virgin carbon into the sorption medium at different pH values. Activated carbon was placed in solutions of pH 1, 5, or 7, and the leaching of six cations (cadmium, chromium, copper, nickel, lead, and zinc) and two anions (arsenate and selenate) was recorded. Considerable quantities of zinc and copper were removed at pH 1 from all carbon sources. However, the amounts leached at pH 5 and 7 were small or undetectable. Our results indicate that leaching or desorption from carbons made from municipal sludge or poultry manure is pH-dependent and occurs readily under highly acidic conditions but minimally under pH conditions typically seen in contaminated water or wastewater.     

The identification of three previously unreported lindane metabolites from mammals

Previously unreported metabolites from the urine of rats treated with lindane have been identified as configurational isomers of 2,4,5,6- and 2,3,4,6-tetrachloro-2-cyclohexen-1-ol. In addition, an intermediate metabolite from the incubation of lindane with liver preparations, under N₂, has been identified as the configurational isomer γ-3,4,5,6-tetrachlorocyclohex-1-ene. The pathways leading to these metabolites appear to have an important role in the metabolism of lindane by mammals.     

Analysis of Flax and Cotton Fiber Fabric Blends and Recycled Polyethylene Composites

Manufacturing composites with polymers and natural fibers has traditionally been performed using chopped fibers or a non-woven mat for reinforcement. Fibers from flax (Linum usitatissimum L.) are stiff and strong and can be processed into a yarn and then manufactured into a fabric for composite formation. Fabric directly impacts the composite because it contains various fiber types via fiber or yarn blending, fiber length is often longer due to requirements in yarn formation, and it controls the fiber alignment via weaving. Composites created with cotton and flax-containing commercial fabrics and recycled high-density polyethylene (HDPE) were evaluated for physical and mechanical properties. Flax fiber/recycled HDPE composites were easily prepared through compression molding using a textile preform. This method takes advantage of maintaining cotton and flax fiber lengths that are formed into a yarn (a continuous package of short fibers) and oriented in a bidirectional woven fabric. Fabrics were treated with maleic anhydride, silane, enzyme, or adding maleic anhydride grafted polyethylene (MAA-PE; MDEX 102-1, Exxelor^® VA 1840) to promote interactions between polymer and fibers. Straight and strong flax fibers present problems because they are not bound as tightly within yarns producing weaker and less elastic yarns that contain larger diameter variations. As the blend percentage and mass of flax fibers increases the fabric strength, and elongation generally decrease in value. Compared to recycled HDPE, mechanical properties of composite materials (containing biodegradable and renewable resources) demonstrated significant increases in tensile strength (1.4–3.2 times stronger) and modulus of elasticity (1.4–2.3 times larger). Additional research is needed to improve composite binding characteristics by allowing the stronger flax fibers in fabric to carry the composites load.