Capturing market impacts of farm level policies: a statistical extrapolation approach using biophysical characteristics and farm resources

Technical change at the farm level or changes in input prices often have an impact on the firm's supply function, which in turn affect their economic and environmental performance. These changes can take place in numerous ways. This paper presents a methodology that increases the consistency of supply responses across various sets of agricultural products and most representative farm typologies in Europe, with a market model based on a statistical response function approach. Since most farm simulation models are limited to a subset of regions and farm types, the linkage to an aggregated model requires a procedure for expanding these results to non-sample regions to achieve full regional coverage. This paper addresses theoretical aspects related to the consistency between micro and market level models. The proposed approach is applied using a consistent set of simulation results from farm models in seven European regions. Our results show a fairly stable behaviour of the farm models considered for the analysis and quite good fit of the estimated response surface. As results are still preliminary we critically reflect on the applicability of this method in addressing further needs on up-scaling of other economic as well as environmental indicators.     

Derivation of correlations to evaluate the impact of retrofitted post-combustion CO2 capture processes on steam power plant performance

When integrating a post-combustion CO₂ capture process and CO₂ compression into a steam power plant, the three interface quantities heat, electricity and cooling duty must be satisfied by the power plant, leading to a loss in net efficiency. The heat duty shows to be the largest contributor to the overall net efficiency penalty of the power plant. Additional energy penalty results from the cooling and electric power duty of the capture and compression units.In this work, the dependency of the energy penalty on the quantity and quality of the heat duty is analyzed and quantified for a state-of-the-art hard coal fired power plant. Furthermore, the energy penalty attributed to the additional cooling and power duty is quantified. As a result correlations are provided which enable to predict the impact of the heat, cooling and electricity duty of post-combustion CO₂ capture processes on the net output of a steam power plant in a holistic approach.     

Combustion and inorganic bromine emission of waste printed circuit boards in a high temperature furnace

High temperature combustion experiments of waste printed circuit boards (PCBs) were conducted using a lab-scale system featuring a continuously-fed drop tube furnace. Combustion efficiency and the occurrence of inorganic bromine (HBr and Br₂) were systematically studied by monitoring the main combustion products continuously. The influence of furnace temperature (T) was studied from 800 to 1400 °C, the excess air factor (EAF) was varied from 1.2 to 1.9 and the residence time in the high temperature zone (RT_HT) was set at 0.25, 0.5, or 0.75 s.Combustion efficiency depends on temperature, EAF and RT_HT; temperature has the most significant effect. Conversion of organic bromine from flame retardants into HBr and Br₂ depends on temperature and EAF. Temperature has crucial influence over the ratio of HBr to Br₂, whereas oxygen partial pressure plays a minor role. The two forms of inorganic bromine seem substantially to reach thermodynamic equilibrium within 0.25 s. High temperature is required to improve the combustion performance: at 1200 °C or higher, an EAF of 1.3 or more, and a RT_HT exceeding 0.75 s, combustion is quite complete, the CO concentration in flue gas and remained carbon in ash are sufficiently low, and organobrominated compounds are successfully decomposed (more than 99.9%).According to these results, incineration of waste PCBs without preliminary separation and without additives would perform very well under certain conditions; the potential precursors for brominated dioxins formation could be destroyed efficiently. Increasing temperature could decrease the volume percentage ratio of Br₂/HBr in flue gas greatly.     

Baseline soil levels of PCDD/Fs established prior to the construction of municipal solid waste incinerators in China

In order to determine the baseline contamination by polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) in different areas in China, prior to the construction of municipal solid waste incinerators (MSWIs), a total of 32 representative soil samples was collected near 16 incinerators and analyzed for their PCDD/F concentrations. The PCDD/F baseline concentrations in the soil samples ranged from 0.32 to 11.4 ng I-TEQ kg⁻¹ (dry matter), with average and median value of 2.73 and 2.24 ng I-TEQ kg⁻¹ (dry matter), respectively, and a span between maximum and minimum recorded value of 36. The PCDD homologues predominated in 26 out of 32 soil samples, with the ratio (PCDDs)/(PCDFs) ranging from 1.1 to 164; however in the other 6 samples, PCDF homologues were larger, with the same ratio varying from 0.04 to 0.8. Principal component analysis (PCA) and hierarchical cluster analysis (HCA) were used to examine PCDD/F amount and profile in these soil samples, and their possible associations with known emission sources: in this process 6 really distinct isomer fingerprints were identified. Background PCDD/F levels and profiles were comparable to those found in soils from China and other countries and indicate a rather low baseline PCDD/F contamination of soils. The present data provide the tools for future assessment of a possible impact of these MSWIs.     

Minimising the regeneration heat duty of post-combustion CO2 capture by wet chemical absorption: The misguided focus on low heat of absorption solvents

An ideal solvent for CO₂ capture by chemical absorption has to meet a number of requirements, such as high CO₂ capacity, high rate of reaction, low costs, low corrosive behaviour, low degradation and low vapour pressure; above all, it has to show a low regeneration heat duty. This heat can be approximated as the sum of three terms: the sensible heat to raise the solvent from absorber to desorber temperature, the heat of evaporation required to produce the stripping steam in the reboiler, and the heat necessary to desorb the CO₂ from the solution (heat of absorption).Many solvent screening studies focus almost exclusively on solvents that show a low heat of absorption. In these studies, the strong dependence of the three contributors to the overall regeneration heat duty on the chosen process parameters and on one another are often neglected.This work explains why the focus on solvents with a low heat of absorption, without considering the overall process, is not sufficient in quantifying the energy performance of alternative solvents. By using thermodynamic interrelations and underpinned by process simulations it is shown that operating parameters of the process, in particular the desorber pressure, must be taken into consideration in the evaluation of new solvents.