锅炉鼓引风机的变频节能改造

锅炉鼓风机及引风机靠风机入口的风门挡板来调节风量,效率低,造成能源浪费.通过对离心风机的变频节能原理的分析,提出具体变频改造方案,并对改造后的效果进行对比,说明采用变频调速控制方式将大大提高风机设备的运行效率,改善风机工况,节能降耗,降低生产成本,直接和间接经济效益十分明显.     

城市生活垃圾管理和处理研究——以漳州市为例

针对漳州市城市生活垃圾管理和处理现状,分析存在的问题,提出改进建议.漳州市生活垃圾管理和处理模式适合在我国推广,我国城市生活垃圾管理和处理急需解决的关键问题是分类收集.     

航空不安全事件人为因素分析R-S-TER模型的构建与应用研究

借鉴传统人为因素分析Reason模型和SHEL模型,结合TER模型的特点构建航空不安全事件人为因素分析的R-S-TER模型。分别采用Dijkstra算法和坐标轴方法应用R-S-TER模型对单个和多个航空不安全事件进行研究,找出各个不安全事件的主要事故链。运用C语言程序计算出了预防航空不安全事件的最优方案。应用R-S-TER模型可以有效地达到预防航空不安全人为因素的目的。     

大气气溶胶酸度和酸化缓冲能力研究

为了掌握大气气溶胶与酸性降水的关系 ,分析和研究了中国北方和南方不同观测点可吸入颗粒物 (PM10 )的酸度 ,并利用微量酸碱滴定的方法测定了其酸化缓冲能力。结果表明大气气溶胶具有一定的酸度 ,同时对酸化的缓冲能力非常低 ,甚至可以促进降水的酸化 ,这种污染特征也是上述观测点发生酸性降水的重要原因之一。     

Spatial succession modeling of biological communities: a multi-model approach

Strong spatial correlation may exist in the spatial succession of biological communities, and the spatial succession can be mathematically described. It was confirmed by our study on spatial succession of both plant and arthropod communities along a linear transect of natural grassland. Both auto-correlation and cross-correlation analyses revealed that the succession of plant and arthropod communities exhibited a significant spatial correlation, and the spatial correlation for plant community succession was stronger than arthropod community succession. Theoretically it should be reasonable to infer a site's community composition from the last site in the linear transect. An artificial neural network for state space modeling (ANNSSM) was developed in present study. An algorithm (i.e., Importance Detection Method (IDM)) for determining the relative importance of input variables was proposed. The relative importance for plant families Gramineae, Compositae and Leguminosae, and arthropod orders Homoptera, Diptera and Orthoptera, were detected and analyzed using IDM. ANNSSM performed better than multivariate linear regression and ordinary differential equation, while ordinary differential equation exhibited the worst performance in the simulation and prediction of spatial succession of biological communities. A state transition probability model (STPM) was proposed to simulate the state transition process of biological communities. STPM performed better than multinomial logistic regression in the state transition modeling. We suggested a novel multi-model framework, i.e., the joint use of ANNSSM and STPM, to predict the spatial succession of biological communities. In this framework, ANNSSM and STPM can be separately used to simulate the continuous and discrete dynamics.     

Spatial variability of soil heavy metals in the three gorges area: multivariate and geostatistical analyses

There is a growing concern about environmental contamination in the three gorges area. The objectives of this study were to investigate the spatial variability and the possible influence factors of seven heavy metals (As, Cd, Cr, Cu, Hg, Pb, and Zn) in the center of this area based on multivariate and geostatistical approaches. All analyzed heavy metals were below their background levels, except Cd. The average concentrations of the analyzed elements in topsoil (0-20 cm) were 5.83 mg As kg(-1), 0.21 mg Cd kg(-1), 78.79 mg Cr kg(-1), 21.53 mg Cu kg (-1), 0.049 mg Hg kg(-1), 24.12 mg Pb kg(-1), and 68.5 mg Zn kg(-1). The concentration of As was mostly due to parent materials, whereas the source of Pb was mainly due to vehicle exhaust. The high concentration of Cd was resulted from agricultural practices and parent materials. The concentrations of Cr, Cu, Hg, and Zn were associated with parent materials and human activities.     

Identification of sources of elevated concentrations of polycyclic aromatic hydrocarbons in an industrial area in Tianjin, China

The concentrations of 16 polycyclic aromatic hydrocarbons (PAHs) were determined by gas chromatography equipped with a mass spectrometry detector in 105 topsoil samples from an industrial area around Bohai Bay, Tianjin in the North of China. Results demonstrated that concentrations of PAHs in 104 soil samples from this area ranged from 68.7 to 5,590 ng g^???1 dry weight with a mean of ∑16PAHs 814 ± 813 ng g^???1, which suggests that there exists mid to high levels of PAH contamination. The concentration of ∑16PAHs in one soil sample from Tianjin Port was exceptionally high (48,700 ng g^???1). Ninety-three of the 105 soil samples were considered to be contaminated with PAHs (>200 ng g^???1), and 25 were heavily polluted (>1,000 ng g^???1). The sites with high PAHs concentration are mainly distributed around chemical industry parks and near highways. Two low molecular weight PAHs, naphthalene and phenanthrene, were the dominant components in the soil samples, which accounted for 22.1% and 10.7% of the ∑16PAHs concentration, respectively. According to the observed molecular indices, house heating in winter, straw stalk combustion in open areas after harvest, and petroleum input were common sources of PAHs in this area, while factory discharge and vehicle exhaust were the major sources around chemical industrial parks and near highways. Biological processes were probably another main source of low molecular weight PAHs.     

Investigations on boron levels in drinking water sources in China

To evaluate boron contamination of public drinking water in China, both dissolved and total boron contents in 98 public drinking water sources from 49 cities, 42 brands of bottled water samples from supermarkets in several cities, and 58 water samples from boron industrial area were measured by inductively coupled plasma-mass spectrometry (ICP-MS). Our experimental results showed that boron existed in public drinking water sources mainly in dissolved status with total concentrations ranging from 0.003 to 0.337 mg/L (mean = 0.046 mg/L). The mean boron concentrations in mineral and pure bottled water were 0.052 and 0.028 mg/L, respectively. The results obtained in this work showed that there was no health risk on view of boron in public drinking water sources and bottled water. In boron industrial area, boron concentrations in surface water and ground water were 1.28 mg/L (range = 0.007–3.8 mg/L) and 18.3 mg/L (range = 0.015–140 mg/L), respectively, which indicated that boron industry caused boron pollution in local water system.     

事故预测方法研究述评

将事故预测方法归纳为情景分析法、回归预测法、时间预测法、马尔可夫链状预测法、灰色预测法和非线性预测法6大类,并进行分析和比较.结果表明:1)目前的预测方法大多针对各自行业部门,因此采用自身相适应的预测方法和提高预测精度是事故预测的关键;2)剔除随机性和偶然性,提取异常点和异质性是工业事故进行预测建模的依据;3)系统安全是一个动态随机的非线性过程,应将定性与定量、线性与非线性、静态与动态预测方法相结合,进行组合预测才有可能实现最优预测;4)基于状态预测的事故优生理念,是未来事故预测理论的发展趋势.     

重型自卸汽车车架横梁异常断裂原因分析

针对无副车架的重型自卸汽车在使用过程中出现的车架横梁异常断裂问题,建立了以板壳单元为基本单元的自卸汽车车架有限元分析模型,采用NASTRAN有限元分析软件对车架强度进行分析.有限元分析结果表明,车架横梁异常断裂现象是横梁连接部位应力值大于材料的屈服强度引起的,这与实车车架断裂结果吻合.根据实际工艺要求,改造车架结构,将连接第2根横梁和纵梁的L板厚度变大,并将平衡悬架推力杆支座由整体式支撑改为分体式支撑,从而使两处的最大应力值分别比原结构下降20.4%和51.7%.改进后车架断裂区的强度明显提高,这表明改造方法有效.