Worldwide Availability of Silver

This article summarizes and interprets estimates, by the US Bureau of Mines and others, of the availability of silver from primary and secondary sources in market economy countries. Despite conservative measurements, ample silver to support expansion of its use in industrial applications was found to exist. Supply from only portions of this resource base can be expected to respond to changes in silver demand, because factors other than price are the major determinant of the flow of silver from large segments of its resource base.     

The fate of hydrogen peroxide as an oxygen source for bioremediation activities within saturated aquifer systems

In situ bioremediation is an innovative technique for the remediation of contaminated aquifers that involves the use of microorganisms to remediate soils and groundwaters polluted by hazardous substances. During its application, this process may require the addition of nutrients and/or electron acceptors to stimulate appropriate biological activity. Hydrogen peroxide has been commonly used as an oxygen source because of the limited concentrations of oxygen that can be transferred into the groundwater using above-ground aeration followed by reinjection of the oxygenated groundwater into the aquifer or subsurface air sparging of the aquifer. Because of several potential interactions of H2O2 with various aquifer material constituents, its decomposition may be too rapid, making effective introduction of the H2O2 into targeted treatment zones extremely difficult and costly. Therefore, a bench-scale study was conducted to determine the fate of H2O2 within subsurface aquifer environments. The purpose of this investigation was to identify those aquifer constituents, both biotic and abiotic, that are most active in controlling the fate of H2O2. The decomposition rates of H2O2 were determined using both equilibrated water samples and soil slurries. Results showed H2O2 decomposition to be effected by several commonly found inorganic soil components; however, biologically mediated catalytic reactions were determined to be the most substantial.     

Neutralization potential determination of siderite (FeCO3) using selected oxidants

Siderite (FeCO3) is commonly found in coal overburden and, when present, can cause interference in the determination of neutralization potential (NP). Under acidic testing conditions, FeCO3 reacts to neutralize acid, which contributes to the NP. However, continued weathering of FeCO3 (oxidation of Fe2+ and hydrolysis of Fe3+) produces a neutral to slightly acidic solution. The effects of hydrogen peroxide (H2O2), potassium permanganate (KMnO4), and O2 on the laboratory measurement of NP of siderite samples taken from overburden were examined. All oxidation treatments lowered the NP values of the siderite samples as compared with the standard USEPA method. However, oxidation with H2O2 produced variable results depending on the amount of H2O2 added. Neutralization potential values obtained after oxidation treatments were highly correlated with Mn concentration. Reaction products (i.e., 2-line ferrihydrite) of siderite samples with H2O2 and KMnO4 were not representative of natural siderite weathering. Oxidation with O2 produced the lowest NP values for siderite samples. The reaction products produced by oxidation with O2 most closely represent those intermediate products formed when siderite is exposed to atmospheric weathering conditions. Oxidation with O2 also proved to be the most reproducible method for accurately assessing NP when siderite is present in overburden samples.     

Runoff transport of pyrethroids from a residential lawn in central California

An irrigation runoff study on a residential lawn was conducted in California, northeast of Sacramento, during the summer and fall of 2008 to investigate the contribution of turf uses of pyrethroids to residues in Californian urban creek sediments. This study examined how over irrigation (i.e., irrigation that produces runoff) in the summer season may transport recently applied pyrethroids. The study included liquid and granular applications of both bifenthrin [(2-methyl-3-phenyl-phenyl) methyl 3-(2-chloro-3,3,3-trifluoro-prop-1-enyl)-2,2-dimethyl-cyclopropane-1-carboxylate] and beta-cyfluthrin [Cyano(4-fluoro-3-phenoxyphenyl)methyl 3-(2,2-dichloroethenyl)-2,2-dimethyl-cyclopropanecarboxylate]. Generally, runoff did not occur at irrigation rates of 2.03 cm/h (0.8 in/h) but did occur when the irrigation rates were increased to about 3.81 cm/h (1.5 in/h), generating chemical losses in the first runoff event of up to 0.58 and 0.08% of applied for beta-cyfluthrin and bifenthrin, respectively. Chemical runoff losses dropped significantly between over-irrigation events with the third over-irrigation event chemical runoff losses representing 0.026 and 0.015% of applied for beta-cyfluthrin and bifenthrin, respectively. Runoff losses were generally less for liquid formulations than granular formulations but within a factor of three. Additionally, the study included a simulated winter rainstorm 8 wk after application. The low runoff losses from turf seen in this study suggest that other sources could be contributing to observed residues in urban streams. Other sources could include pyrethroids ending up on impervious surfaces, such as concrete driveways from off-target applications to turf, spills, and other poor handling practices, or pyrechroids applied directly to impervious surfaces for insect control.     

Advanced geophysical underground coal gasification monitoring

Underground Coal Gasification (UCG) produces less surface impact, atmospheric pollutants and greenhouse gas than traditional surface mining and combustion. Therefore, it may be useful in mitigating global change caused by anthropogenic activities. Careful monitoring of the UCG process is essential in minimizing environmental impact. Here we first summarize monitoring methods that have been used in previous UCG field trials. We then discuss in more detail a number of promising advanced geophysical techniques. These methods – seismic, electromagnetic, and remote sensing techniques – may provide improved and cost-effective ways to image both the subsurface cavity growth and surface subsidence effects. Active and passive seismic data have the promise to monitor the burn front, cavity growth, and observe cavity collapse events. Electrical resistance tomography (ERT) produces near real time tomographic images autonomously, monitors the burn front and images the cavity using low-cost sensors, typically running within boreholes. Interferometric synthetic aperture radar (InSAR) is a remote sensing technique that has the capability to monitor surface subsidence over the wide area of a commercial-scale UCG operation at a low cost. It may be possible to infer cavity geometry from InSAR (or other surface topography) data using geomechanical modeling. The expected signals from these monitoring methods are described along with interpretive modeling for typical UCG cavities. They are illustrated using field results from UCG trials and other relevant subsurface operations.     

Practical Applications of Stacks to Minimize Pollution Problems

“Rules of thumb” for stack design have been developed for use on problems where extensive studies cannot be justified or where quantitative design data are unavailable. The application of these rules to a practical stack design problem is discussed. The IBM 704 computer has been used for rapid yet rigorous stack design studies. The computer procedures for design are discussed and its application to a practical problem is described in detail.     

Precipitator Equipment

The purpose of this section is to set forth the main elements and features of the equipment used for the collection of fly ash. Hardware and structural details of a routine nature having little or no bearing on basic performance are outside the scope of the paper.