Patterns of Streamwater Acidity in Lye Brook Wilderness,Vermont, USA

Under the United States Clean Air Act Amendments of 1977, a class I designation safeguards wilderness areas from the negative effects of new sources of air pollution. We monitored streamwater chemistry in the class I Lye Brook Wilderness in southwestern Vermont from May 1994 through August 1995. Stream samples were collected biweekly at nine sampling locations throughout the wilderness and were analyzed for major cations and anions, dissolved organic carbon, pH, and acid-neutralizing capacity. Eight of nine sites sampled had mean annual acid neutralizing capacity values below zero. During the study period, decreases in streamwater acid neutralizing capacity values were caused primarily by SO₄ ²⁻. At some sites, however, NO₃ ⁻ and naturally occurring, weak organic acids were seasonally important. During high discharge, the low pH and high concentrations of inorganic monomeric Al were at levels that are toxic to acid-sensitive aquatic species. Watershed mass balances were calculated to determine annual gains or losses for measured ions. These budgets indicate that S inputs and outputs were nearly equal, there was a net loss of base cations, and a net gain in N. How long these watersheds can continue to assimilate additional N inputs is unknown.     

Defining contamination limits with pneumatic hammer soil probes

There have been more than 100,000 confirmed releases of petroleum from underground storage tanks (USTs) in the United States and its territories. The 10,000-gallon spill and cleanup of unleaded gasoline, detailed in this article, that occurred from 1988 to 1990 on Cape Cod, Massachusetts, illustrates the author's argument that electric pneumatic-hammer soil probes are the fastest, most convenient, and least costly way of performing the soil-gas surveys needed to locate spilled petroleum product, evaluate vapor intrusion into basements, and determine the extent of groundwater contamination for remediation purposes. Current state soil-gas requirements are also included.     

An approach to integrate impact scoping with environmental impact assessment

Impact scoping is the process of identifying important issues of a proposal and focusing the environmental impact assessment (EIA) on the high-priority issues. Although impact scoping in one form or another has been inherent to EIA for some time, documentation of its development and discussion of refinements to impact scoping processes have not been forthcoming. This article traces the development of impact scoping through time and highlights the need for such processes in EIA. A focused environmental assessment (FEA) approach to impact scoping that is suitable for implementation in an EIA is presented here and advantages of its use are delineated. FEA is a three-staged process that encourages impact scoping through progressive steps including impact identification, assessment and management planning. FEA combines a suite of EIA methods including: issues matrices, impact hypotheses, valued ecosystem components, and stakeholder participation sessions to effectively integrate impact scoping with EIA.     

ELECTROPHORETIC WATER CLARIFICATION TECHNIQUES1

Only very recently has a limited amount of attention been focused directly on electrophoresis as a method for improving water quality. This approach has been proposed primarily as a method for removal of suspended colloidal material, although solutes can also be removed by this method. Very simply electrophoresis is defined as the movement of charged suspended particles in a dc electric field. Several electrophoretic clarification systems and techniques have been developed and evaluated primarily for removing colloidal clay from suspension. The methods should apply equally well to any negatively charged particulate matter. Design for optimal clay removal efficiency and operating cost efficiency has been based upon previous theoretical results and upon modification of the combination filter-el ectrophores is model of Bier. These systems and techniques along with the theoretical developments leading to their design are discussed. Results and conclusions are given for tests that have been concluded concerning the feasibility or practicality of these electrophoretic clarification systems for commercial use. These are viewed in light of various limiting factors such as electrical conductivity of the medium, quality of water desired, colloid concentrations and electrophoretic mobility of the suspended materials.     

THE DEVELOPMENT OF A MODEL TO EVALUATE HYDROLOGIC RISK IN WATER RESOURCE SYSTEM DESIGN1

In this paper, a procedure for analyzing a water resource system with special emphasis on evaluation of acceptable economic risk due to occasional failures to deliver water is proposed. The basic methodology includes the development of a simple mathematical model which describes the physical hydrologic and economic characteristics of a single reservoir irrigation and city water supply system and an evaluation of economic benefits of the system with full and partial deliveries of water. The system is simulated for various combinations of decision variables (system magnitudes) and an optimum design is obtained by response surface technology. Emphasis is placed on the basic model and methodology although, in order to introduce some realism, the procedure is applied to data based on the existing reservoir system on the South Concho River in West Central Texas.     

METEOROLOGICAL EXPERIMENTS FOR AUTOMATED SATELLITES

Four satellites have been used in meteorology. They are TIROS, ESSA, Nimbus, and Applications Technology Satellite (ATS). The first three operate in the orbital altitudes of about 1000 to 1200 km while the fourth, ATS, is at geosynchronous altitude of 36,000 km. Cloud cover is being observed operationally from low orbit and experimentally from synchronous altitude. Wind velocity has been inferred from the frequent cloud cover pictures taken by ATS and satellite-balloon systems are being developed which will locate and track constant-density level balloons for determining wind flow. Spectrometers and radiometers operating in the electromagnetic spectral region from the ultraviolet to the microwave region are being developed to quantitatively measure temperature, water vapor, density, and wind profiles. These will furnish data for the development and testing of atmospheric models for numerical prediction. In addition, experiments are being developed to measure ozone and other constituents of the air, solar energy, surface conditions, heat balance and other atmospheric attributes which affect the structure and dynamics of the atmosphere.     

Association between older driver characteristics, on-road driving test performance, and crash liability

From May 1999, a new system for licensing older drivers was introduced in New Zealand. It included a practical on-road driving test with expanded scope, to be completed every two years from the time the driver turns 80. The relationship between crashes and test performance needed to be studied to inform the debate regarding the testing system. The population studied was all drivers who entered this licensing system during its first three years of operation. They were defined as crash involved if they were involved in an injury crash during the two years following their first licensure under the new system. Logistic regression was used to describe the risk of crash involvement in terms of driving test performance and other driver characteristics. Each driving test failure was associated with a 33% increase in the odds of crash involvement (95% CI 14% to 55%), controlling for age, gender, minor traffic violations, and whether the older driver lived with another licensed driver or not. Minor traffic violations in the two years following the driving test were associated with twice the odds of crash involvement. These results suggest that the new on-road driving test does identify older driver behaviors or limitations that are related to crash liability. It is anticipated that the results presented here will provide essential information for discussing older driver licensing systems, whose impact will grow in importance as the population of drivers ages.     

Monitoring Forest Carbon Sequestration with Remote Sensing and Carbon Cycle Modeling

Sources and sinks of carbon associated with forests depend strongly on the management regime and spatial patterns in potential productivity. Satellite remote sensing can provide spatially explicit information on land cover, stand-age class, and harvesting. Carbon-cycle process models coupled to regional climate databases can provide information on potential rates of production and related rates of decomposition. The integration of remote sensing and modeling thus produces spatially explicit information on carbon storage and flux. This integrated approach was employed to compare carbon flux for the period 1992–1997 over two 165-km² areas in western Oregon. The Coast Range study area was predominately private land managed for timber production, whereas the West Cascades study area was predominantly public land that was less productive but experienced little harvesting in the 1990s. In the Coast Range area, 17% of the land base was harvested between 1991 and 2000. Much of the area was in relatively young, productive-age classes that simulations indicate are a carbon sink. Mean annual harvest removals from the Coast Range were greater than mean annual net ecosystem production. On the West Cascades study area, a relatively small proportion (< 1%) of the land was harvested and the area as a whole was accumulating carbon. The spatially and temporally explicit nature of this approach permits identification of mechanisms underlying land base carbon flux. Published online