Dibutylphthalate degradation in estuarine and freshwater sites

Biotic and abiotic degradation of di-$\text{n}$-butylphthalate (DBP) in water and sediment/water systems from six different sites was investigated under laboratory conditions. DBP disappearance was rapid in all microbially active systems and substantially reduced under sterile conditions. Adaptation of microbial populations to degrade DBP was indicated in six of nine evaluations conducted. The presence of sediment significantly increased biodegradation rates in five of the six sites.     

Source contributions to the mutagenicity of urban particulate air pollution

Using organic compounds as tracers, a chemical mass balance model was employed to investigate the relationship between the mutagenicity of the urban organic aerosol sources and the mutagenicity of the atmospheric samples. The fine particle organic mass concentration present in the 1993 annual average Los Angeles-area composite sample was apportioned among eight emission source types. The largest source contributions to fine particulate organic compound mass concentration were identified as smoke from meat cooking, diesel-powered vehicle exhaust, wood smoke, and paved road dust. However, the largest source contributions to the mutagenicity of the atmospheric sample were natural gas combustion and diesel-powered vehicles. In both the human cell and bacterial assay systems, the combined mutagenicity of the composite of primary source effluents predicted to be present in the atmosphere was statistically indistinguishable from the mutagenicity of the actual atmospheric sample composite. Known primary emissions sources appear to be capable of emitting mutagenic organic matter to the urban atmosphere in amounts sufficient to account for the observed mutagenicity of the ambient samples. The error bounds on this analysis, however, are wide enough to admit to the possible importance of additional mutagenic organics that are formed by atmospheric reaction (e.g., 2-nitrofluoranthene has been identified as an important human cell mutagen in the atmospheric composite studied here, accounting for approximately 1% of the total sample mutagenic potency).     

Artificial sweat enhances dermal transfer of chlorpyrifos from treated nylon carpet fibers

The dermal transfer and absorption of 14C-ring-chlorpyrifos from nylon carpet fibers was measured in skin penetration-evaporation cells with excised pig skin. Prior to application, synthetic sweat was applied to skin in half of the cells. Radioactivity was measured in receptor fluid, dermis, epidermis, tape stripping samples, and vapor trap samples during a 24-h period. The sum of radiolabel recovered from the dermis and receptor fluid represented the absorbed dose. There was no significant difference (p > 0.05) in percutaneous absorption between cells that received the synthetic sweat application and "dry" cells (1.3 +/- 0.3% of applied dose). There was significantly more (p < 0.05) radiolabel recovered from tape stripping (5.4 +/- 2.1 vs. 2.8 +/- 0.6%) and in the epidermis (4.5 +/- 0.8 vs. 3.1 +/- 0.3%) from cells that received the synthetic sweat application, which indicated synthetic sweat facilitated transfer of chlorpyrifos from a treated substrate to the skin surface. The measured value for percutaneous absorption of chlorpyrifos agreed with the value predicted from an empirical model previously developed for nitro compound-containing soil.     

Controlled release, blind test of DNAPL remediation by ethanol flushing

A dense nonaqueous phase liquid (DNAPL) source zone was established within a sheet-pile isolated cell through a controlled release of perchloroethylene (PCE) to evaluate DNAPL remediation by in-situ cosolvent flushing. Ethanol was used as the cosolvent, and the main remedial mechanism was enhanced dissolution based on the phase behavior of the water-ethanol-PCE system. Based on the knowledge of the actual PCE volume introduced into the cell, it was estimated that 83 L of PCE were present at the start of the test. Over a 40-day period, 64% of the PCE was removed by flushing the cell with an alcohol solution of approximately 70% ethanol and 30% water. High removal efficiencies at the end of the test indicated that more PCE could have been removed had it been possible to continue the demonstration. The ethanol solution extracted from the cell was recycled during the test using activated carbon and air stripping treatment. Both of these treatment processes were successful in removing PCE for recycling purposes, with minimal impact on the ethanol content in the treated fluids. Results from pre- and post-flushing partitioning tracer tests overestimated the treatment performance. However, both of these tracer tests missed significant amounts of the PCE present, likely due to inaccessibility of the PCE. The tracer results suggest that some PCE was inaccessible to the ethanol solution which led to the inefficient PCE removal rates observed. The flux-averaged aqueous PCE concentrations measured in the post-flushing tracer test were reduced by a factor of 3 to 4 in the extraction wells that showed the highest PCE removal compared to those concentrations in the pre-flushing tracer test.     

Adjusting tapered element oscillating microbalance data for comparison with Federal Reference Method PM2.5 measurements in region 5

Continuous monitoring of particulate matter (PM) with a diameter less than 2.5 microm (PM2.5) is quickly gaining acceptance as an alternative means of measuring fine PM in the United States. For this project, data were taken from all monitoring sites within Region 5 that used the tapered element oscillating microbalance (TEOM) for PM2.5 and had a collocated Federal Reference Method (FRM) monitor. Scatter plots of TEOM versus FRM show that for a significant fraction of the observations, an independent factor causes the TEOM to underestimate the FRM value. This underestimation appears to increase as temperature decreases. For this analysis, a linear relationship was fit to the TEOM versus FRM data, allowing a break or knot in the relationship, modeled as a change of slope, at a site-specific temperature. To test whether the models are adequate for adjusting future measurements, models were also developed using the first year of data only, and the remaining observations were used to test the durability of the relationships. For all but one monitor in Minnesota, the models developed for each site had consistently high R2s, were predictive of future measurements, and could be used to derive "FRM-like" results from the TEOM measurements. The temperature knots fitted by the model for individual sites ranged from 12.9 to 20.6 degrees C. Data from all six sites in the state of Michigan were also combined to determine if a single model could be developed for the entire state. While the single model for the state of Michigan worked reasonably well, some of the predicted concentrations at individual sites were systematically underestimating the observed concentrations on more polluted days. The same conclusion was drawn for a Region 5-wide model. This approach was also found to work very well for six individual TEOM monitors in New York State.     

The interaction effects of binary mixtures of benzene and toluene on the developing heart of medaka (Oryzias latipes)

The United States Environmental Protection Agency (USEPA) has pursued the estimation of risk of adverse health effects from exposure to chemical mixtures since the early 1980s. Methods used to calculate risk estimates of mixtures were often based on single chemical information that required assumptions of dose-addition or response-addition and did not consider possible changes in response due to interaction effects among chemicals. Full factorial designs for laboratory studies can produce interactions information, but these are expensive to perform and may not provide the information needed to evaluate specific environmentally relevant mixtures. In this research, groups of Japanese medaka (Oryzias latipes) embryos were exposed to binary mixtures of benzene and toluene as well as to each of these chemicals alone. Endpoint specific dose-response models were built for the hydrocarbon mixture under an assumption of dose-additivity, using the single chemical dose-response information on benzene and toluene. The endpoints included heart rate, heart rate progression, and lethality. Results included a synergistic response for heart rate at 72 h of development, and either additivity or antagonism for all other endpoints at 96 h of development. This work uses an established statistical method to evaluate the toxicity of an environmentally relevant mixture to ascertain whether interaction effects are occurring, thus providing additional information on toxicity.     

The relationship between surface adsorption and the hydrolysis of amitraz in anionic surfactant solutions

The adsorption of amitraz to various adsorbents was studied in terms of the amount and rate of adsorption and the effect that adsorption had on the stability of amitraz in an aqueous environment. Adsorption results showed that in terms of their ability to adsorb amitraz from solution the adsorbents tested in this study can be ordered as follows: coarse carbon > cation exchange resin > or = anion exchange resin > fine carbon. Amitraz was not adsorbed on sand and potassium oxihumate. Adding sodium lauryl sulfate and potassium oxihumate to aqueous suspensions of suspended adsorbents containing adsorbed amitraz showed that both these anionic surfactants significantly increased the hydrolysis rate because the half-lives for amitraz was reduced from 27 days for a suspension to only 8 hours for amitraz adsorbed to a cation exchange resin and suspended in an aqueous buffer pH 5.8 containing 0.5% of the anionic surfactant sodium lauryl sulfate and 12 hours when 1% potassium oxihumate was added.     

Disease suppression on greenhouse tomatoes using plant waste compost

This study investigated the disease suppression abilities of a compost amendment that was added to the conventional growing medium, yellow cedar sawdust, used in most British Columbia vegetable greenhouses. The compost amendment was produced in a controlled, in-vessel process primarily from greenhouse crop waste materials. The pathogen and cultivar under study were Fusarium oxysporum f. sp. radicis-lycopersici (FORL) on Dombito (FORL-susceptible) beefsteak greenhouse tomatoes. Significant reduction of Fusarium crown and root rot was also realized in tomato seedlings by applying compost amendment from several different batches, as a seed cover or plug substitute. In a greenhouse trial, disease suppression using a mixture of 2:1 sawdust to amendment by volume was shown to be most effective. As a result, the tomato yield over a nine-month growing season was improved by 74% where the medium was deliberately infested with FORL.     

Toxicity of chemical components of fine particles inhaled by aged rats: effects of concentration

This study tested the hypothesis that exposure to mixtures containing fine particles and ozone (O3) would cause pulmonary injury and decrements in functions of immunological cells in exposed rats (22-24 months old) in a dose-dependent manner. Rats were exposed to high and low concentrations of ammonium bisulfate and elemental carbon and to 0.2 ppm O3. Control groups were exposed to purified air or O3 alone. The biological end points measured included histopathological markers of lung injury, bronchoalveolar lung fluid proteins, and measures of the function of the lung's innate immunological defenses (macrophage antigen-directed phagocytosis and respiratory burst activity). Exposure to O3 alone at 0.2 ppm did not result in significant changes in any of the measured end points. Exposures to the particle mixtures plus O3 produced statistically significant changes consistent with adverse effects. The low-concentration mixture produced effects that were statistically significant compared to purified air but, with the exception of macrophage Fc receptor binding, exposure to the high-concentration mixture did not. The effects of the low- and high-concentration mixtures were not significantly different. The study supports previous work that indicated that particle + O3 mixtures were more toxic than O3 alone.     

Reduction of perchlorate and nitrate by salt tolerant bacteria

Spent regenerant brine from ion-exchange technology for the removal of perchlorate and nitrate produces a high salt waste stream, which requires remediation before disposal. Bioremediation is an attractive treatment option. In this study, we enriched for salt tolerant bacteria from sediments from Cargill salt evaporation facility (California, USA), the Salton Sea (California, USA), and a high density hydrocarbon oxidizing bacterial cocktail. The bacterial cocktail enrichment culture reduced ClO4- from 500 to 260 mg 1 in 4 weeks. Salt tolerant bacterial isolates from the enrichment cultures and two denitrifying salt tolerant bacteria, Haloferax denitrificans and Parococcus halodenitricans, substantially reduced perchlorate. The highest rate of perchlorate removal was recorded with the isolate, Citrobacter sp.: 32% reduction in 1 week. This bacterium substantially reduced perchlorate in 0-5% NaCl solutions and maximally at 30 degrees C and at an initial pH 7.5. In simulated brines containing 7.5% total solids, the Citrobacter sp. significantly reduced both perchlorate and nitrate with 34.9 and 15.6% reduction, respectively, in 1 week. Coculture of a potent perchlorate reducing, non-salt tolerant (non-saline) bacterium, perclace and the Citrobacter sp. proved most effective for perchlorate removal in the brine (46.4% in 1 week). This study demonstrates that both anions can be reduced in treatment of brines from ion exchange systems.