Environmental influence on the locomotor activity rhythm of the sand-shore amphipod Talorchestia deshayesi

The precision and persistence of the nocturnal, surface locomotor activity rhythm of the sand-beach amphipod Talorchestia deshayesi is described. The rhythm is expressed as a circadian activity period with no evidence of a circa-tidal component associated with the time of high tide. The rhythm is light-sensitive and entrainment occurs in response to changes in the time of an experimentally simulated dusk transition. Locomotor activity is initiated at the end of the dusk transition with cessation always occurring prior to dawn. The point of activity initiation is taken to be the position of a synchronizing cue controlling entrainment. The cue appears to be an absolute irradiance level of approximately 1.0 to 2.0×10^-4 W m^-2     

The role of behavioral responses to predators in modifying urchins' (Strongylocentrotus droebachiensis) destructive grazing and seasonal foraging patterns

We documented spatial and temporal patterns of urchins (Strongylocentrotus droebachiensis) and periwinkles (Littorina littorea) in three habitats: a persistent Laminaria longicruris and L. digitata bed; an urchin dominated barrens, and the edge of the kelp bed that formed a boundary between the two. Urchins were rare in the kelp and, when present, always large and well hidden, a pattern we interpret as a response to crab and lobster predation. Urchins were abundant in the barrens, and, in the summer when predaceous fish were active during the day, foraged only at nigh. We observed the formation of a dense urchin feeding front along the kelp bed edge, and these urchins remained exposed and feeding even during the summer. Laboratory experiments demonstrated that aggregations are an effective defense against some predators, and that the presence of crabs increases the tendency of large urchins to aggregate. We hypothesize that healthy Laminaria spp. beds persist because kelp bed associated predators keep urchins at low densities and in hiding. A reduction in predation pressure permits urchin densities to increase to the point where they form aggregations, which provide better defense than hiding. These aggregations then graze destructively on Laminaria spp., forming barrens. These barrens seem to be a new, stable configuration of the system.     

Fate, effects and potential environmental risks of ethylene glycol: a review

The fate, effects, and potential environmental risks of ethylene glycol (EG) in the environment were examined. EG undergoes rapid biodegradation in aerobic and anaerobic environments (approximately 100% removal of EG within 24 h to 28 days). In air, EG reacts with photo-chemically produced hydroxyl radicals with a resulting atmospheric half-life of 2 days. Acute toxicity values (LC(50)s and EC(50)s) were generally >10,000 mg/l for fish and aquatic invertebrates. The data collectively show that EG is not persistent in air, surface water, soil, or groundwater, is practically non-toxic to aquatic organisms, and does not bioaccumulate in aquatic organisms. Potential long-term, quasi-steady state regional concentrations of EG estimated with a multi-media model for air, water, soil, and sediment were all less than predicted no effect concentrations (PNECs).     

Determination of perchlorate in selected surface waters in the Great Lakes Basin by HPLC/MS/MS

Surface water samples were collected from 55 sites in the Great Lakes Basin and analyzed for the presence of perchlorate using HPLC/MS/MS with an isotopically enriched internal standard. Sites included areas impacted by heavy industry, urbanization, agriculture and atmospheric deposition. Perchlorate was detected at several of the sites at concentrations close to the method detection limit (0.2 microg/l). Despite these low concentrations, its presence was confirmed by sample concentration and determination of the isotopic ratio of perchlorate. The presence of perchlorate at two of the sites was related to a fireworks display which had occurred prior to sampling. The other detections of perchlorate were in rivers/creeks draining watersheds which had high density livestock and crop farming activity. We suspect the two are related. To our knowledge, these are the first reported concentrations of perchlorate in Canadian surface waters.     

Pilot scale thermal treatment of pig slurry for the inactivation of animal virus pathogens

This paper describes a pilot scale treatment plant that has been designed and built for the thermal inactivation in pig slurry of two viruses that infect pigs--African swine fever virus (ASFV) and swine vesicular disease virus (SVDV). The plant treats pig slurry continuously at a rate of up to 100 litres/hour and functions by heating the slurry, maintaining at least 99.99% of the slurry at the required temperature for a minimum period of 5 minutes, and then recovering the heat to raise the temperature of the incoming slurry. Results obtained indicated that SVDV was inactivated in pig slurry to below detectable levels with an alkaline pH (pH 7.5 to 8, as is usually the case) at a temperature of between 50 and 55 degrees C. In acidified slurry (pH 6.4), inactivation occurred between 55 and 60 degrees C. The difference in inactivation temperatures was probably due to the presence of free ammonia in the unacidified slurry. ASFV was inactivated by operating the plant at a temperature of 53 degrees C at a pH of 8.     

Monitoring ambient ozone with a network of passive samplers: a feasibility study

Ambient levels of ozone have been measured at 46 mountain forest, desert, Class I Wilderness areas and other remote locations using a network of passive samplers. Typical values were 40-80 ppb (2 week samples) and exhibited temporal variations (studied for up to 1 year) as well as changes with elevation (studied up to 10 500 ft (3 200 m)). The performance of the passive sampler was evaluated with respect to reproducibility, field controls, data capture (>0.95), precision for co-located samples (av. = 11.9%, n = 103), and the role of other atmospheric oxidants as potential interferents (2 locations). Suggestions for additional sampler performance evaluation and network operation are outlined.     

Modelling of Motor Vehicle Fuel Consumption and Emissions Using a Power-Based Model

The performance of a power based fuel consumption and exhaust emissions model for spark ignition vehicles has been evaluated using a large Australian database derived from testing a wide range of in-use cars on a chassis dynamometer. It was also applied to results of on-road fuel consumption measurement using a "floating" car which was driven back and forth on hilly roadways in Sydney with a length of 8.6 km. The model is found to predict the fuel consumption well over the standard drive cycles and also for the floating car. Average exhaust emissions were also well predicted, but, as would be expected, vehicle-to-vehicle correlation is impossible due to the well-known high variability of emissions between nominally identical vehicles.     

Counterpart Models in Facility Location Science and Reserve Selection Science

Five classes of zero–one programming models for discrete facility location problems are compared to counterpart models for the selection of conservation reserves. The basic problem of siting facilities to cover demand for services is analogous to the problem of selecting reserves to support species diversity. The classes of models include the set covering and maximal covering models, as well as models for backup and redundant coverage. Issues of reliability and uncertainty are addressed by chance constrained covering models and maximal expected covering models. Exact and heuristic solution approaches are discussed. Multi-objective and economic issues are considered.     

Status of the Niagara River point source discharge information: Sampling design and estimation of loading

Two basic requirements, low bias and high precision, are necessary for generating reliable estimates for the load from point and nonpoint sources of pollution. Biases and low precision can be the result of using a bad sampling design and/or inadequate method of estimation. The effects of biases can be reduced at the design stage prior to the data collection or at the data anlysis stage. This paper discusses the statistical issues involved in generating adequate load estimations using recently published point source discharge data from the Niagara River to illustrate these issues.