PCDD/PCDF,chlorinated pesticides and PAH in Chinese teas

Four samples of Chinese tea (two green teas, and two brick teas) were analyzed for their concentrations of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/PCDF), chlorinated pesticides and PAH. The infusions prepared from these teas were also analyzed for PCDD/PCDF. The levels of DDT and its metabolites in tea leaves were within the safety limit of 0.2 mg/kg. Rather high levels of total PAH were obtained in brick tea (1048–1162 mg/kg), when compared with green tea (497–517 mg/kg). In terms of PCDD/PCDF, the concentrations of green tea and brick tea differed by a factor of 16, while the concentrations of all infusions were within a factor of 2. The dioxin concentrations in green tea leaves can be explained through uptake of atmospheric PCDD/PCDF. The higher concentrations in the brick tea leaves are due the longer exposure time, and to certain extent, the use of old leaves, branches and roots when making the tea, and additional components such as soil particulates through contamination. Certain Chinese populations drinking a large amount of brick tea (>3 l per day) indicated that individuals of these populations consume more tea than Europeans or North Americans result in a comparably higher intake of PCDD/PCDF. Tea consumption can attribute to up to 10% of the TDI recommended by WHO (only PCDD/PCDF considered, no PCB analyzed).     

An Ergonomics Study of a Semiconductors Factory in an IDC for Improvement in Occupational Health and Safety

The study aimed to conduct an ergonomic intervention on a conventional line (CL) in a semiconductor factory in Malaysia, an industrially developing country (IDC), to improve workers’ occupational health and safety (OHS). Low-cost and simple (LCS) ergonomics methods were used (suitable for IDCs), e.g., subjective assessment, direct observation, use of archival data and assessment of noise. It was found that workers were facing noise irritation, neck and back pains and headache in the various processes in the CL. LCS ergonomic interventions to rectify the problems included installing noise insulating covers, providing earplugs, installing elevated platforms, slanting visual display terminals and installing extra exhaust fans. The interventions cost less than 3 000 USD but they significantly improved workers’ OHS, which directly correlated with an improvement in working conditions and job satisfaction. The findings are useful in solving OHS problems in electronics industries in IDCs as they share similar manufacturing processes, problems and limitations.     

A study of stopping propensity at matured red light camera T-intersections

PROBLEM: This paper evaluates the stopping propensity of drivers at matured in-service red light camera (RLC) signalized T-intersections after a number of years of camera operation. METHOD: A special-purpose data logger working in conjunction with loop sensors was used to gather traffic parameters, vehicle stopping/crossing movements, and signal phases at camera (treatment) and noncamera (comparison) approaches. Logistic modeling was employed to determine the stopping/crossing decisions of civilian vehicle drivers in response to the onset of yellow (amber) with traffic and the associated situational and behavioral variables, including their interactions. SUMMARY: The propensity to stop at camera approaches was about 17 times more than at noncamera approaches. This finding strongly affirmed the positive effect of RLC in encouraging drivers to stop. The likelihood to stop was about 6.5 times higher for an approach that faces an opposing right-turn conflict immediately after the onset of red. Higher stopping propensity was also more prevalent during weekdays and in periods of low traffic volumes. IMPACT ON INDUSTRY: The findings provided an objective measure on the effectiveness of RLC that would be useful to evaluate intersections for camera installation as well as on the implementation and operational aspects of RLC program.     

A micrometeorological technique to monitor total hydrocarbon emissions from landfarms to the atmosphere

Landfarming is used to treat petroleum hydrocarbon-contaminated soils and a variety of waste streams from industrial operations. Wastes are applied to a soil surface and indigenous soil microorganisms utilize the hydrocarbons in the applied waste as a carbon source for metabolism, thereby biodegrading the applied material. Concerns have been expressed that abiotic losses, such as volatilization, play a significant role in hydrocarbon reduction within the soil. To assist in better defining atmospheric releases of total hydrocarbons from landfarms treating petroleum hydrocarbons, a flux gradient micrometeorological approach was developed and integrated with a custom-built total hydrocarbon detector, and a novel air sampling system and averaging algorithm. The micrometeorological technique offers unobtrusive spatially averaged real-time continuous measurements, thereby providing a time history of emissions. This provides opportunities to investigate mechanisms controlling emissions and to evaluate landfarm management strategies. The versatility of the technique is illustrated through measurements performed at a remote landfarm used to treat diesel fuel-contaminated soil in northern Ontario and during routine operations at two active refinery landfarms in southwestern Ontario.     

Effect of dissolved organic matter from sludge and sludge compost on soil copper sorption

Interaction of Cu with dissolved organic matter (DOM) is an important physicochemical process affecting Cu mobility in soils. The aim of this study was to investigate the effects of DOM from anaerobically digested dewatered sludge and sludge compost on the sorption of Cu on an acidic sandy loam and a calcareous clay loam. In the presence of DOM, Cu sorption capacity decreased markedly for both soils, especially for the calcareous soil. The Cu sorption isotherms could be well described by the Freundlich equation (r2 = 0.99), and the binding intensity parameter of soils in the presence of sludge DOM was lower than compost DOM. An increase in DOM concentration significantly reduced the sorption of Cu by both soils. Within the Cu and DOM concentration range studied, the decrease in Cu sorption caused by sludge DOM was consistently greater than that of compost DOM. This might be attributed to the greater amount of hydrophobic fraction of DOM in the compost. Moreover, the reduction of Cu sorption caused by DOM was more obvious in the soil with higher pH. In addition, the sorption of Cu increased with an increase in pH for both soils without the addition of DOM, while Cu sorption in the presence of DOM was unexpectedly decreased with an increase in pH at a pH >6.8. This implied that DOM produced by sludge or other C-enriched organic wastes heavily applied on calcareous soils might facilitate the leaching loss of Cu because of the formation of soluble DOM-metal complexes.     

Selenium distribution and fluxes in intertidal wetlands, San Francisco Bay, California

Selenium (Se) concentrations exceeding ecological guidelines for sediments and suspended particulate matter (SPM) have been observed in the northern reach of the San Francisco Bay estuary. Longterm availability of elevated Se in wetland sediments depends in part on the fluxes controlling Se distribution. The relative contribution of sedimentary vs. post-depositional Se fluxes in two San Francisco Bay intertidal wetlands was estimated. Selenium concentrations on surface wetland sediments were compared with levels on SPM, and with previously established background levels in San Francisco Bay sediments. Sediment Se fluxes to the wetlands were measured directly using sediment traps. Although dissolved Se concentrations are higher than particulate Se concentrations in San Francisco Bay water, sediment input into the system provides the major flux of Se. Strong correlation between Se and C on SPM (r2 = 0.81) indicates the importance of organic particulate deposition. Dependence on sediment texture was qualitatively established by measuring Se on particle-size separates. Normalization to Al showed that 65% of Se spatial variability is related to sediment texture. Selenium is further enriched in the marsh via post-depositional inputs, probably due to in situ adsorption from overlying water and chemical reduction. According to sediment flux measurements, enrichment in the marsh is equivalent to 20 to 25% of the particulate Se flux, thereby defining the marsh as a Se sink. These findings highlight the need for more intensive monitoring of SPM as the major source of Se to intertidal wetlands.     

Toxicity of pH,heavy metals and bisulfite to a freshwater green alga

Low pH markedly reduced the growth and photosynthetic activity of an $\text{Ankistrodesmus}$ sp. The alga could not grow at pH 3 and only slight growth occurred at pH 4. The alga grew well above pH 4 with maximum growth occurring at pH 6. The fixation of ¹⁴CO₂ followed a similar pattern with pH. The algal cells were also sensitive to mercury and bisulfite in acidic conditions. Algal growth and photosynthesis were reduced by mercury and bisulfite more at pH 5 than at pH 7. Lead was relatively non-toxic to the algal cells at both pH levels. Bisulfite inhibited the membrane transport of α-amino-¹⁴C-isobutyric acid at pH 5 but not at pH 7. The results suggest that algal growth and activity may be reduced in acidic lakes by low pH and that the toxicity of mercury and bisulfite is enhanced in acidic conditions.     

Heavy metal contamination by Al-fabrication plants in Hong Kong

Leaf samples of six plant species collected from locations near the Al-fabrication plants in Sai Kung, Hong Kong were found to be heavily contaminated by Al, Cd, Pb, Ni, Cu and Zn, as determined by inductively — coupled plasma emission spectrophotometer (ICP). Studies using scanning electron microscope incorporated with X-ray microanalyzer showed that significant amounts of dust, with elevated concentrations of heavy metals, were deposited on the leaf surface. The stomatal pores were partially plugged and the guard cells were distorted. The amount of dust deposition and metal contamination varied significantly among different species. Lantana camara had the highest concentrations of all metals. Washing with deionized water could remove the surficial dust particles and reduce the metal contamination, with a degree of effectiveness depending on plant species and metal species. About 50% of Al and other metals were removed from leaves of L. camara and Fiscus variegata by washing, whereas only 20% removal was recorded in Bauhina variegata, the species had the least dust deposition. The soil samples and Al wastes collected from the same sites also exhibited higher values of total metal concentrations than the control. However, the contents of extractable metals were extremely low and were almost below the limits of detection. Experimental data further suggested that the source of leaf metals was mainly accumulated from metal-enriched aerosols, either from Al-fabrication plants or from automobile exhausts, and contribution from soil was relatively unimportant.     

Prenatal diagnosis of non-ketotic hyperglycinemia

We describe successful prenatal diagnosis in four pregnancies at risk for non-ketotic hyperglycinemia, two affected and two unaffected, using the glycine level and the glycine/ serine ratio in amniotic fluid obtained at 16 weeks gestational age. Although this method of prenatal diagnosis for non-ketotic hyperglycinemia has been effective in our hands the narrow differences between affected and unaffected pregnancies indicate the need for caution concerning its reliability.     

Distribution of Organo-Chlorine Pesticides (DDT and HCH) Between Plant and Soil System

This paper reports a study of the distribution of organo-chlorine pesticides (DDT and HCH) between rice plants and the soil system by spraying before the heading stage at four different dosage levels – control, normal dosage (15 kg ha^–1 of 6% HCH and 7.5 kg ha^–1 of 25% DDT), double dosage and four times dosage. Soil and plant samples were taken respectively at the 1st h, 3rd, 10th, 20th, and 40th day after spraying and at the harvest time. The results indicate that less than 5% of HCH and 15% of DDT were absorbed by the surface of rice leaves for normal dosage. Most of both pesticides moved into the soil in solution after spraying. Compared with DDT, HCH was degraded and run off more easily. HCH residues in the surface soil layer (1–3 cm) were already below 6.4 g kg^–1 at the mature stage, lower than Chinese Environmental Quality Standard for Agricultural Soils: HCH <0.05 mg kg^–1. However DDT residues in the surface soil layer remained 172 g kg^–1, higher than the national standard: DDT <0.05 mg kg^–1. According to the test f OCP residues in rice seeds, it can be concluded that the OCP sprayed onto the surface of rice leaves can move into rice plants and accumulate in the seeds at the mature stage. HCH residues in rice seeds of the double and four times dosage treatments, and DDT residues in all treatments, exceeded the Chinese National Food Standard (HCH <0.10 mg kg^–1, DDT <0.20 mg kg^–1).