Describing variability of MSW composition data with the log-logistic distribution

Variations in solid waste composition data are necessary as inputs to solid waste planning, yet uncertainty exists regarding which probability distributions might be generally valuable to describe the variability. Twenty-two detailed analyses of solid waste from British Columbia, Canada, were fitted to distributions using the BestFit software. Alternative distributions were ranked based on three goodness-of-fit parameters and twelve waste fractions. The log-logistic distribution was found to be the most able to fit over the wide range of composition types considered. The results were demonstrated to be insensitive to the number of waste components or to the choice of a two- or three-parameter distribution. Although other distributions were able to better match the waste composition for individual waste types, the log-logistic distribution was demonstrated to fit, overall, a wide variety of waste composition types.     

Degradation of polycyclic aromatic hydrocarbons by a bacterial consortium enriched from mangrove sediments

The biodegradability of a polycyclic aromatic hydrocarbons (PAHs) mixture consisted of fluorene (Fl), phenanthrene (Phe) and pyrene (Pyr) by a bacterial consortium enriched from mangrove sediments under sediment-free and sediment slurry conditions was investigated. The enriched consortium made up of three bacterial strains, namely Rhodococcus sp., Acinetobacter sp. and Pseudomonas sp., had a good PAH degradation capability with 100% degradation of Fl and Phe in sediment-free liquid medium after 4 weeks of growth. The Fl and Phe degradation percentages in sediment slurry were higher than that in liquid medium. Autochthonous microorganisms in sediments also possessed satisfactory PAH degradation capability and all three PAHs were almost completely degraded after 4 weeks of growth. Bioaugumentation (inoculation of the enriched consortium to sediments) showed a positive effect on PAH biodegradation after 1 week of growth. Complete biodegradation of pyrene took longer time than that for Fl and Phe, indicating the enriched bacterial consortium had preference to utilize low-molecular weight PAHs.     

Protective effects of seaweeds against liver injury caused by carbon tetrachloride in rats

Three species of seaweeds collected from Tung Ping Chau, Hong Kong, were screened for their hepatoprotective activity using carbon tetrachloride (CCl4)-induced liver injury in the rat as a model of chemical hepatitis. A single oral dose of 1.25 ml/kg of CCl4 was able to produce significantly elevated levels of serum glutamic pyruvic transaminase (GPT) and glutamic oxaloacetic transminase (GOT). Administration of 150, 300 and 600 mg/kg of aqueous extracts from Myagropsis myagroides, Sargassum henslowianum and S. siliquastrum, respectively, significantly reduced the CCl4-induced acute elevation in the levels of GPT and GOT in rats. The same result was also seen in the histopathological study of liver tissue. The seaweed crude extracts probably acted to protect against CCl4-induced liver injury through their antioxidant properties.     

Use of protein phosphatase inhibition assay to detect microcystins in Donghu Lake and a fish pond in China

Seasonal variations in the level of total microcystins in water samples collected from Donghu Lake and a fish pond in Wuhan, China, were studied between March 1995 and February 1996 using a protein phosphatase inhibition assay involving a radioactive 32P-labelled substrate. The assay is highly reliable and repeatable, and is probably the most sensitive assay for microcystin detection to date. Results of the survey indicated the presence of microcystins in the water samples, and the concentration of microcystins appeared to be related to the degree of eutrophication and water temperature. There is also a correlative relationship between the quantity of microcystins and the abundance of microcystin-producing cyanobacteria (Anabaena and Oscillatoria) in the water bodies over a year cycle. In the present study, the positive detection of microcystins in water bodies having no signs of algal bloom warns of considerable potential threat of these waters to public health.     

Lead contamination and isotope signatures in the urban environment of Hong Kong

The source and the extent of Pb pollution in the urban environment of Hong Kong were investigated at five different urban settings selected on the basis of their annual average daily traffic (AADT) varying from less than 100 to 61,700. In addition, a small distant island without any traffic was selected to establish the possible baseline values. The surface environmental samples studied consisted of street and tunnel dusts, gully sediments, and a limited number of roadside topsoils. The analytical results clearly indicated variable degrees of Pb contamination in these urban settings. However, the level of contamination varied significantly among different types of samples collected at the same location. Pb concentrations of roadside topsoils (79+/-22 micrograms/g) and gully sediments (278+/-88 micrograms/g) were lower than those of the corresponding road dusts (327+/-54 micrograms/g). The Pb isotope compositions in different urban settings varied considerably. The bedrock in the small island had the lowest Pb concentration (12 micrograms/g) but with the highest 206Pb/207Pb ratio (1.2206), whereas the tunnel ceiling dusts with the highest level of Pb (1410 micrograms/g) had the lowest 206Pb/207Pb ratio (1.1062). Despite the significant differences in vehicle types and traffic volumes, and the presence of several different petroleum retailers in Hong Kong, the Pb isotope ratios of road dusts (206Pb/207Pb: 1.1553+/-0.0043, 208Pb/207Pb: 2.4408+/-0.0084) varied within a relatively narrow range among all the five urban sampling sites. On the other hand, the Pb isotopic compositions of gully sediments (206Pb/207Pb: 1.1515+/-0.0145, 208Pb/207Pb: 2.4322+/-0.0198) varied noticeably within the same setting, but were reasonably comparable across the different study sites. In general, the 206Pb/207Pb ratios of road dusts can be used to estimate the direct contribution from automobile emissions, whereas those of gully sediments might reflect the effects of the mixing of different anthropogenic sources. The Pb isotope signatures in the urban environment of Hong Kong clearly suggested that anthropogenic Pb in the environment originated from Pb ore with a low 206Pb/207Pb ratio (such as the Australian Pb ore and similar sources in Southeast Asia) were significantly different from those of the anthropogenic Pb present in the neighboring Pearl River Delta (PRD) region.     

Increase of multi-metal tolerance of three leguminous plants by arbuscular mycorrhizal fungi colonization

A greenhouse pot experiment was conducted to investigate the effects of the colonization of arbuscular mycorrhizal fungus (AMF) Glomus mosseae on the growth and metal uptake of three leguminous plants (Sesbania rostrata, Sesbania cannabina, Medicago sativa) grown in multi-metal contaminated soil. AMF colonization increased the growth of the legumes, indicating that AMF colonization increased the plant’s resistance to heavy metals. It also significantly stimulated the formation of root nodules and increased the N and P uptake of all of the tested leguminous plants, which might be one of the tolerance mechanisms conferred by AMF. Compared with the control, colonization by G. mosseae decreased the concentration of metals, such as Cu, in the shoots of the three legumes, indicating that the decreased heavy metals uptake and growth dilution were induced by AMF treatment, thereby reducing the heavy metal toxicity to the plants. The root/shoot ratios of Cu in the three legumes and Zn in M. sativa were significantly increased (P < 0.05) with AMF colonization, indicating that heavy metals were immobilized by the mycorrhiza and the heavy metal translocations to the shoot were decreased.     

Perspirable skin: Thermal buckling achieved by complex functionally graded materials

A perspirable skin is a new design concept of thermal protection system that will autonomously reduce the surface temperature in many applications such as reentry and hypersonic vehicles. A unique design features an assembly of tiles, which buckles upon heating. Potentially, a large gap can be generated through this buckling action. These tiles will be assembled and shrink-fitted within an opening on the existing skin. To induce the buckling action, each tile needs to have a unique CTE variation, which causes thermal expansion radially and thermal shrinkage tangentially. This paper concentrates on the fabrication of these tiles made of complex functionally graded materials (FGMs), and presents our effort to design and fabricate these tiles.