LCA of selective waste collection systems in dense urban areas

This paper presents research concerning the environmental analysis of the selective collection management of municipal solid waste. The main goal of this study is to quantify and to compare, by means of Life Cycle Assessment (LCA), the potential environmental impacts of three selective collection systems modelled on densely populated urban areas. These systems are: the mobile pneumatic, the multi-container and the door-to-door. Impact assessment method based on CML 2 baseline 2000 is applied to the different systems. The study separates and analyzes the collection systems in substages: two urban substages and one inter-city substage. At the urban level, the multi-container system has the least environmental impact of all systems. The mobile pneumatic system has greater environmental impacts in terms of global warming, fresh water aquatic ecotoxicity, terrestrial ecotoxicity, acidification and eutrophication. In this system, the pipes and the pneumatic transport have the greatest impacts. The door-to-door system has a greatest environmental impact in terms of abiotic depletion, ozone layer depletion and human toxicity. An overall evaluation of the three substages, with a sensitivity analysis, indicates that the mobile pneumatic system at an inter-city distance of 20 km shows the greatest environmental impacts and the greatest energy demand. Inter-city transport is key; the results show that from an inter-city distance of 11 km onwards, this becomes the substage which most contributes to global warming impact and energy demand, in all the systems.     

Ten years measuring PCDDs/PCDFs in ambient air in Catalonia (Spain)

This work summarizes the results of a ten year surveillance programme on PCDD/F in ambient air carried out in Catalonia (Spain). The study has been conducted by the Dioxin Laboratory of Spanish Council for Scientific Research (CSIC) in collaboration with the Environment Department of the Catalonian Government. 175 samples have been collected throughout Catalonia from 1994 to 2004. Different sampling locations classified as industrial, traffic, urban, suburban and rural sites have been monitored in order to find the most contaminated zones as well as the ones with expected background concentrations. The highest concentrations found in this study were determined at the industrial locations. Concentrations ranging from 5 to 1196 fg I-TEQ/m3, with a mean value of 140 fg I-TEQ/m3 and from 10 to 357 fg I-TEQ/m3, with a mean value of 72 fg I-TEQ/m3 were determined in industrial and traffic sampling points, respectively. In contrast, the lowest concentrations were found in rural stations, ranging from 5 to 45 fg I-TEQ/m3, with a mean value of 28 fg I-TEQ/m3. The PCDD/F concentration trend in Catalonian ambient air shown a clear drop of the median values occurred during the study sampling period. A decline of about 70% was observed from 1997-1998 to 2003-2004.     

PM sources in a highly industrialised area in the process of implementing PM abatement technology. Quantification and evolution

Principal component analysis (PCA) coupled with a multilinear regression analysis (MLRA) was applied to PM(10) speciation data series (2002-2005) from four sampling sites in a highly industrialised area (ceramic production) in the process of implementing emission abatement technology. Five common factors with similar chemical profiles were identified at all the sites: mineral, regional background (influenced by the industrial estate located on the coast: an oil refinery and a power plant), sea spray, industrial 1 (manufacture and use of glaze components, including frit fusion) and road traffic. The contribution of the regional background differs slightly from site to site. The mineral factor, attributed to the sum of several sources (mainly the ceramic industry, but also with minor contributions from soil resuspension and African dust outbreaks) contributes between 9 and 11 microg m(-3) at all the sites. Source industrial 1 entails an increase in PM(10) levels between 4 and 5 microg m(-3) at the urban sites and 2 microg m(-3) at the suburban background site. However, after 2004, this source contributed less than 2 microg m(-3) at most sites, whereas the remaining sources did not show an upward or downward trend along the study period. This gradual decrease in the contribution of source industrial 1 coincides with the implementation of PM abatement technology in the frit fusion kilns of the area. This relationship enables us to assess the efficiency of the implementation of environmental technologies in terms of their impact on air quality.     

Fungal biofilters for toluene biofiltration: evaluation of the performance with four packing materials under different operating conditions

Packing materials play a key role in the performance of bioreactors for waste gas treatment and particularly in biofilter applications. In this work, the performance of four differently packed biofilters operated in parallel for the treatment of relatively high inlet concentration of toluene was studied. The reactors were compared for determining the suitability of coconut fiber, digested sludge compost from a waste water treatment plant, peat and pine leaves as packing materials for biofiltration of toluene. A deep characterisation of materials was carried out. Biological activity and packing capabilities related to toluene removal were determined throughout 240 days of operation under different conditions of nutrients addition and watering regime. Also, biofilters recovering after a short shutdown was investigated. Nutrient addition resulted in improved removal efficiencies (RE) and elimination capacities (EC) of biofilters reaching maximum ECs between 75 and 95 g m(-3)h(-1) of toluene. In the first 80 days, the pH decreased progressively within the reactors, causing a population change from bacteria to fungi, which were the predominant decontaminant microorganisms thereafter. All reactors were found to recover the RE rapidly after a 5 days shutdown and, in a maximum of 7 days, all reactors had been completely recuperated. These results point out that fungal biofilters are a suitable choice to treat high loads of toluene. In general, coconut fiber and compost biofilters exhibited a better performance in terms of elimination capacity and long-term stability.     

Arsenic speciation of atmospheric particulate matter (PM10) in an industrialised urban site in southwestern Spain

An arsenic speciation study has been performed in PM10 samples collected on a fortnight basis in the city of Huelva (SW Spain) during 2001 and 2002. The arsenic species were extracted from the PM10 filters using a NH2OH x HCl solution and sonication, and determined by HPLC-HG-AFS. The mean bulk As concentration of the samples analyzed during 2001 and 2002 slightly exceed the mean annual 6 ng m(-3) target value proposed by the European Commission for 2013, arsenate [As(V)] being responsible for the high level of arsenic. The speciation analyses showed that As(V) was the main arsenic species found, followed by arsenite [As(III)] (mean 6.5 and 7.8 ng m(-3) for As(V), mean 1.2 and 2.1 ng m(-3) for As(III), in 2001 and 2002, respectively). The high levels of arsenic species found in PM10 in Huelva have a predominant industrial origin, such as the one from a nearby copper smelter, and do not present a seasonal pattern. The highest daily levels of arsenic species correspond to synoptic conditions in which the winds with S and SW components transport the contaminants from the main emission source. The frequent African dust outbreaks over Huelva may result in an increment of mass levels of PM10, but do not represent a significant input of arsenic in comparison to the anthropogenic source. The rural background levels of arsenic around Huelva are rather high, in comparison to other rural or urban areas in Spain, showing a relatively high atmosphere residence time of arsenic. This work shows the importance of arsenic speciation in studies of aerosol chemistry, due to the presence of arsenic species [As(III) and As(V)] with distinct toxicity.     

Distribution of polycyclic aromatic hydrocarbons (PAHs) and tributyltin (TBT) in Barcelona harbour sediments and their impact on benthic communities

Sediments have long been recognised as a sink for many contaminants like polycyclic aromatic hydrocarbons (PAHs) and tributyltin (TBT), which by virtue of their nature can strongly adsorb onto sediments affecting the benthic community inhabiting them. Using geographical information systems, this study reports and combines the results of several already existing studies along Barcelona harbour in order to assess the potential ecological impacts of these contaminants on the benthos of the harbour ecosystem. Chemical analysis indicated low to moderate contents of PAHs and high contents of TBT in sediments in Barcelona harbour. Comparison against existing sediment quality guidelines (SQGs) indicated that acutely toxic effects would not be expected for PAHs but for TBT, which represents a serious environmental threat for the benthic community. Benthos surveys revealed a deterioration of the benthic community throughout the harbour, especially in the inner port.     

Invading parasitoids suffer no Allee effect: a manipulative field experiment

One frequent explanation for the failure of biological invasions is the Allee effect: due to positive density dependence, initially small invading populations may fail to establish and spread. Populations released for biological control are similar to fortuitous invading populations and may therefore suffer from Allee effects. However, unlike fortuitous invasions, biological control allows the experimental manipulation of initial population size and, thus, offers a unique opportunity to test for the occurrence of Allee effects. We manipulated the initial size of 45 populations of a parasitoid wasp introduced for the biological control of a phytophagous insect and followed the population dynamics of both parasitoids and hosts during three years. Our results suggest an absence of Allee effects but clear negative density dependence instead: (1) the probability of establishment after three years was not affected by initial population size; (2) net reproductive rate was highest at low parasitoid density and high host density; (3) the sex ratio, reflecting the proportion of virgin females, did not increase at low density, suggesting that low densities did not impede mate-finding; (4) the depression of host populations did not depend upon the number of parasitoids introduced. This is, to our knowledge, the first experimental test of the Allee effect in an invading parasitoid. It leads us to propose that a number of behavioral and life-history features of many parasitoids could protect them from Allee effects.     

Building waste management core indicators through Spatial Material Flow Analysis: Net recovery and transport intensity indexes

In this paper, the material and spatial characterization of the flows within a municipal solid waste (MSW) management system are combined through a Network-Based Spatial Material Flow Analysis. Using this information, two core indicators are developed for the bio-waste fraction, the Net Recovery Index (NRI) and the Transport Intensity Index (TII), which are aimed at assessing progress towards policy-related sustainable MSW management strategies and objectives. The NRI approaches the capacity of a MSW management system for converting waste into resources through a systematic metabolic approach, whereas the TII addresses efficiency in terms of the transport requirements to manage a specific waste flow throughout the entire MSW management life cycle. Therefore, both indicators could be useful in assessing key MSW management policy strategies, such as the consecution of higher recycling levels (sustainability principle) or the minimization of transport by locating treatment facilities closer to generation sources (proximity principle). To apply this methodological approach, the bio-waste management system of the region of Catalonia (Spain) has been chosen as a case study. Results show the adequacy of both indicators for identifying those points within the system with higher capacity to compromise its environmental, economic and social performance and therefore establishing clear targets for policy prioritization. Moreover, this methodological approach permits scenario building, which could be useful in assessing the outcomes of hypothetical scenarios, thus proving its adequacy for strategic planning.     

Dissipation kinetics and effect of different decontamination techniques on the residues of emamectin benzoate and spinosad in cowpea pods

Dissipation and decontamination of the semisynthetic macrolide emamectin benzoate and the natural insecticide spinosad on cowpea pods were studied following field application at single and double doses of 11.0 and 22 and 73 and 146 g ai ha^?1, respectively. Residues of these naturalytes were estimated using LC-MS/MS. The initial deposit of 0.073 and 0.153 mg kg^?1 of emamectin benzoate dissipated below quantitation level on the fifth and seventh day at single and double dosage, respectively. For spinosad, the initial deposits of 0.94 and 1.90 mg kg^?1 reached below quantitation level on the 7th day and 15th day at single and double dosage, respectively. The half-life of emamectin benzoate and spinosad was 1.13–1.49 and 1.05–1.39 days with the calculated safe waiting period of 2.99–6.12 and 1.09–3.25 days, respectively, for single and double dosage. Processing of the harvestable pods with different decontamination techniques resulted in 33.82 to 100 % removal 2 h after the application of emamectin benzoate and 100 % removal 3 days after spraying, while the removal was 42.05 to 87.46 % 2 h after the application of spinosad and 38.05 to 68.08 % 3 days after application.     

Recognize fish as food in policy discourse and development funding

The international development community is off-track from meeting targets for alleviating global malnutrition. Meanwhile, there is growing consensus across scientific disciplines that fish plays a crucial role in food and nutrition security. However, this ‘fish as food’ perspective has yet to translate into policy and development funding priorities. We argue that the traditional framing of fish as a natural resource emphasizes economic development and biodiversity conservation objectives, whereas situating fish within a food systems perspective can lead to innovative policies and investments that promote nutrition-sensitive and socially equitable capture fisheries and aquaculture. This paper highlights four pillars of research needs and policy directions toward this end. Ultimately, recognizing and working to enhance the role of fish in alleviating hunger and malnutrition can provide an additional long-term development incentive, beyond revenue generation and biodiversity conservation, for governments, international development organizations, and society more broadly to invest in the sustainability of capture fisheries and aquaculture.Electronic supplementary materialThe online version of this article (10.1007/s13280-020-01451-4) contains supplementary material, which is available to authorized users.