强化混凝处理制革废水的优化研究

对皮革废水混凝处理的条件进行优化,分别采用FeSO4·7H2O和阳离子聚丙烯酰胺作为混凝剂和助凝剂,以COD、总铬和硫化物为指标,设计正交试验确定强化混凝处理皮革废水的最优条件并进行验证性试验。结果表明:当FeSO4·7H2O投加量为1800mg/L,阳离子聚丙烯酰胺投加量为7.5mg/L,pH为10,混凝效果最好,对COD、总铬和硫化物的平均去除率分别为14.92%、99.40%和99.71%。     

Assessment of the sources and transformations of nitrogen in a plain river network region using a stable isotope approach

The great spatial and temporal variability in hydrological conditions and nitrogen(N)processing introduces large uncertainties to the identification of N sources and quantifying N cycles in plain river network regions. By combining isotopic data with chemical and hydrologic measurements, we determined the relative importance of N sources and biogeochemical N processes in the Taige River in the East Plain Region of China. The river was polluted more seriously by anthropogenic inputs in winter than in summer. Manure and urban sewage effluent were the main nitrate(NO-3) sources, with the nitrification of N-containing organic materials serving as another important source of NO-3. In the downstream, with minor variations in hydrological conditions, nitrification played a more important role than assimilation for the decreasing ammonium(NH+4-N) concentrations.The N isotopic enrichment factors(ε) during NH+4utilization ranged from- 13.88‰ in March to- 29.00‰ in July. The ratio of the increase in δ18O and δ15N of river NO-3in the downstream was 1.04 in January and 0.92 in March. This ratio indicated that NO-3assimilation by phytoplankton was responsible for the increasing δ15N and δ18O values of NO-3in winter. The relationships between δ15N of particulate organic nitrogen and isotopic compositions of dissolved inorganic nitrogen indicated that the phytoplankton in the Taige River probably utilized NH+4preferentially and mainly in summer, while in winter, NO-3assimilation by phytoplankton was dominant.     

Zero-valent iron doped carbons readily developed from sewage sludge for lead removal from aqueous solution

Low-cost but high-efficiency composites of iron-containing porous carbons were prepared using sewage sludge and ferric salts as raw materials. Unlike previous time- and energy-consuming manufacturing procedures, this study shows that pyrolyzing a mixture of sludge and ferric salt can produce suitable composites for lead adsorption. The specific surface area, the total pore volume and the average pore width of the optimal composite were 321 m²/g, 0.25 cm³/g, and 3.17 nm, respectively. X-ray diffraction analysis indicated that ferric salt favored the formation of metallic iron, while Fourier transform infrared spectroscopy revealed the formation of hydroxyl and carboxylic groups. The result of batch tests indicated that the adsorption capacity of carbons activated with ferric salt could be as high as 128.9 mg/g, while that of carbons without activation was 79.1 mg/g. The new manufacturing procedure used in this study could save at least 19.5 kJ of energy per gram of activated carbon.     

昆明城市生活垃圾处理产业发展的SWOT分析研究

随着城市化进程的深入,生活垃圾问题日益突出,城市生活垃圾处理产业的发展是解决“垃圾围城”困境的有效途径.昆明城市生活垃圾处理产业处于发展阶段,运用态势分析法(SWOT),系统地对昆明城市生活垃圾处理产业发展的优势、劣势、所存在的机会和威胁进行分析,并提出相应发展对策,包括完善生活垃圾处理.产业的经济激励机制;采用多种项目融资模式进行生活垃圾产业建设融资;加快静脉产业园区建设发展;打造再生资源回收利用的龙头企业;积极控制生活垃圾源头;建立垃圾排放权交易等.     

食蚊鱼(Gambusia afinis)cat、gapdh和gst基因的克隆及其在生态毒理学中的应用

根据Ensembl、Genbank登录的鱼类cat、gapdh和gst基因的CDS序列设计普通PCR扩增引物,寻找食蚊鱼的cat、gapdh和gst基因的c DNA片段,并根据定量引物设计要求设计出相应的SYBR Green I荧光定量RT-q PCR引物,建立了食蚊鱼cat、gapdh和gst基因的SYBR Green I荧光定量RT-q PCR方法。该方法在104~108数量级范围内有良好线性关系(R=0.999~1.000);熔解曲线显示扩增产物特异性良好,均为单一峰值;质粒标准品最高浓度与最低浓度的批内试验变异系数与批间试验变异系数均低于2%。利用该方法监测和评价环境污染物对水生生物的影响,选择了水体中常见典型药物污染物——双氯芬酸,研究其对食蚊鱼抗氧化基因表达的影响。结果表明,雌性食蚊鱼暴露在不同浓度双氯芬酸钠(0.005、0.05、0.5和5 mg·L-1)24 h后,其肝脏cat、gapdh和gst的mRNA呈现显著变化,相对于对照组,在低浓度0.005 mg·L-1时,cat与gst mRNA的表达量均有极显著上升(p0.01),而其它浓度均极显著下降(p0.01)。试验表明该方法具有快速、精确、灵敏度高的优点,可为利用该类小型鱼类的原位污染物的生物监测和生态毒理评价提供有力的技术支持。     

Estimation of autotrophic maximum specific growth rate constant--experience from the long-term operation of a laboratory-scale sequencing batch reactor system

The autotrophic maximum specific growth rate constant, muA,max, is the critical parameter for design and performance of nitrifying activated sludge systems. In literature reviews (i.e., Henze et al., 1987; Metcalf and Eddy, 1991), a wide range of muA,max values have been reported (0.25 to 3.0 days(-1)); however, recent data from several wastewater treatment plants across North America revealed that the estimated muA,max values remained in the narrow range 0.85 to 1.05 days(-1). In this study, long-term operation of a laboratory-scale sequencing batch reactor system was investigated for estimating this coefficient according to the low food-to-microorganism ratio bioassay and simulation methods, as recommended in the Water Environment Research Foundation (Alexandria, Virginia) report (Melcer et al., 2003). The estimated muA,max values using steady-state model calculations for four operating periods ranged from 0.83 to 0.99 day(-1). The International Water Association (London, United Kingdom) Activated Sludge Model No. 1 (ASM1) dynamic model simulations revealed that a single value of muA,max (1.2 days(-1)) could be used, despite variations in the measured specific nitrification rates. However, the average muA,max was gradually decreasing during the activated sludge chlorination tests, until it reached the value of 0.48 day(-1) at the dose of 5 mg chlorine/(g mixed liquor suspended solids x d). Significant discrepancies between the predicted XA/YA ratios were observed. In some cases, the ASM1 predictions were approximately two times higher than the steady-state model predictions. This implies that estimating this ratio from a complex activated sludge model and using it in simple steady-state model calculations should be accepted with great caution and requires further investigation.     

以能力培养为基础的现代安全培训模式建设

现代企业培训，应着眼于企业的长远发展，从改变员工和管理者的观念出发，提高他们的综合素质和对企业的忠诚度，增强企业的凝聚力，建立新型的企业文化，从而达到提升核心竞争力的目的。在石化企业中，HSE教育培训是保障安全生产的重要组成部分，也是打造良好的HSE文化的重要措施。多年来，中国石化安全工程研究院以服务于社会、服务于石化为己任，     

Preparation and evaluation of bis(diallyl alkyl tertiary ammonium salt) polymer as a promising adsorbent for phosphorus removal

Problems associated with water eutrophication due to high phosphorus concentrations and related environmentally safe solutions have attracted wide attention. A novel bis(diallyl alkyl tertiary ammonium salt) polymer, particularly poly(N~1,N~1,N~6,N~6-tetraallylhexane-1,6-diammonium dichloride)(PTAHDADC), was synthesized and characterized by Fourier transform infrared spectroscopy, nuclear magnetic resonance, scanning electron microscopy, mercury intrusion method, and thermogravimetric analysis. The adsorption characteristics in phosphorus were evaluated in dilute solution, and the recycling properties of PTAHDADC were investigated. Results showed that PTAHDADC possessed macropores with a size distribution ranging from 30 to 130 μm concentrating at 63 μm in diameter and had 46.52% of porosity, excellent thermal stability below 530 K, and insolubility. PTAHDADC could effectively remove phosphorus at p H = 7–11 and had a removal efficiency exceeding 98.4% at pH = 10–11. The adsorption equilibrium data of PTAHDADC for phosphorus accorded well with the Langmuir and pseudo-second-order kinetic models. Maximum adsorption capacity was 52.82 mg/g at 293 K. PTAHDADC adsorbed phosphorus rapidly and reached equilibrium within 90 min. Calculated activation energy Eawas 15.18 k J/mol. PTAHDADC presented an excellent recyclability with only 8.23% loss of removal efficiency after five adsorption–desorption cycles. The morphology and structure of PTAHDADC slightly changed as evidenced by the pre-and post-adsorption of phosphorus, but the process was accompanied by the partial deprotonation of the(–CH_2)_3-NH~+ group of PTAHDADC. The adsorption was a spontaneous exothermic process driven by entropy through physisorption, electrostatic attraction, and ion exchange. Survey results showed that PTAHDADC was a highly efficient and fast-adsorbing phosphorus-removal material prospective in treating wastewater.