Sorption of phenanthrene by dissolved organic matter and its complex with aluminum oxide nanoparticles

Intent of this study was to explore the potential application of polymerin, the polymeric, dissolved organic matter fraction from olive oil wastewaters, in technologies aimed at remediating hydrophobic organic compounds (HOCs) point-source pollution. Phenanthrene binding with polymerin was investigated. Moreover, the effect of addition of micro and nanoscale aluminum oxides (Al₂O₃) was studied, as well as sorption of polymerin on the oxides. Phenanthrene binding capacity by polymerin was notably higher than the sorption capacities for both types of Al₂O₃ particles. Polymerin sorption on nanoparticles was nearly 100 times higher than microparticles. In a three-phase system, using microparticles, higher phenanthrene sorption was found by adding into water polymerin, oxides and phenanthrene simultaneously. In contrast, using nanoparticles, a considerable enhancement of phenanthrene sorption was shown by adding phenanthrene to a pre-formed and dried polymerin-oxide complex. These findings support the application of polymerin, especially associated with Al₂O₃ nanoparticles, in remediation of water contaminated with HOCs. This work highlights the significant role of nanoparticles.     

Sorption of organic contaminants by biopolymers: role of polarity, structure and domain spatial arrangement

Sorption behavior of hydrophobic organic contaminants (HOCs) (i.e., pyrene, phenanthrene and naphthalene) by native and chemically modified biopolymers (lignin, chitin and cellulose) was examined. Lignins (native and treated) showed nonlinear sorption for all compounds studied, emphasizing their glassy character. Chitins and celluloses had linear isotherms for phenanthrene and naphthalene, illustrating the dominance of partitioning, while pyrene yielded nonlinear isotherms. Sorption capacity (K(oc)) of HOCs was negatively correlated with the polarity [(O+N)/C] of the biopolymers. Aromatic and alkyl+aromatic C percentages, rather than alkyl C content, demonstrated a better correlation with K(oc) values, indicating the importance of aromatic structures for HOC affinity. Hydrophobicity (K(ow))-normalized K(oc) values decreased sharply with increasing percentage of O-alkyl C versus total aliphatic C (O-alkyl C/total aliphatic C) or with polar C/(alkyl+aromatic C) ratio of the biopolymers until their values reached 80% and 4, respectively, illustrating the effect of surrounding polar groups on reducing affinity for HOCs. Overall, the results of this study highlight the role of spatial arrangement of domains within biopolymers in sorption of HOCs, and point to sorbent properties, such as functionality, polarity and structure, jointly regulating the sorption of HOCs in biopolymers.     

苯酚、苯胺及其衍生物对斜生栅列藻的急性毒性及QSAR研究

本文应用ＯＥＣＤ标准方法测定了１８种酚类胺类化合物对斜生栅列藻的４８ｈ－ＥＣ６０值,选择参数ＥＬＵＭＯ和ｌｇＫｏｗ进行了ＱＳＡＲ分析,得到下列回归方程：－１ｇＥＣ５０＝２．５４１－０．６４９ＥＬＵＭＯ＋０．２９９ＬｇＫｏｗ,ｎ＝１８,ｒ＝０．９０３,ＳＥ＝０．３１４应用所得方程计算了化合物的毒性,探讨了毒机理。     

Efficient degradation of rhodamine B using modified graphite felt gas diffusion electrode by electro-Fenton process

The electro-Fenton (EF) process treatment of 0.1-M (rhodamine B) RhB solution was studied with different graphite cathode materials, and graphite felt (GF) was selected as a promising material in further investigation. Then, the degradation performances of gas diffusion electrode (GDE) and graphite felt (GF) were compared, and GDE was confirmed to be more efficient in RhB removal. The operational parameters such as Fe²⁺ dosage and current density were optimized, and comparison among different modified methods—polytetrafluoroethylene-carbon black (PTFE-CB), polytetrafluoroethylene-carbon nanotube (PTFE-CNT), electrodeposition-CB, and electrodeposition-CNT—showed 98.49 % RhB removal by PTFE-CB-modified cathode in 0.05 M Na₂SO₄ at a current density of 50 A/m² and an air flow rate of 1 L/min after 20 min. Meanwhile, after cathode modified by PTFE-CB, the mineralization efficiency and mineralization current efficiency performed absolutely better than the pristine one. Cyclic voltammograms, SEM images, contact angles, and BET surface area were carried out to demonstrate stronger current responses and higher hydrophilicity of GF after modified. The value of biochemical oxygen demand/chemical oxygen demand (BOD₅/COD) increased from 0.049 to 0.331 after 90-min treatment, suggesting the solution was biodegradable, and the modified cathode was confirmed to be stable after ten circle runs. Finally, a proposed degradation pathway of RhB was put forward.     

聚α-烯烃合成油的清洁生产工艺

针对聚α-烯烃合成油（PAO）生产旧工艺存在的问题,介绍了以固载化AlCl3为催化剂的PAO生产新工艺,考察了各种因素对PAO收率的影响。实验结果表明,在反应温度为100℃、反应时间为8h、A1C1,与α-烯烃质量比为10：75的条件下,PAO收率为48．8％。采用新工艺后,PAO产品质量有了明显提高,黏度指数为132,碱和白土的消耗为零,且没有废渣产生,可实现清洁化生产。     

基于专利的区域环境技术创新水平空间分异研究

以环境技术专利表征创新水平,采用绝对指标与相对指标、专利结构布局系数(或特化系数)与技术创新主体结构布局系数,衡量中国各省市环境技术创新水平的空间分异,探讨其不平衡性的原因.研究结果表明,绝对指标评价的环境技术创新水平,呈现"东高西低"的格局;相对指标表征的环境技术创新水平,大部分省市的评价结果基本上在0.1～0.5、0.59～1.04之间,空间分异不明显.东部地区省市发明专利、企业专利特化系数高,如天津、香港、北京、上海的发明专利特化系数均在1.3以上,香港和上海的企业专利特化系数大于2.但是发明专利、公司企业专利--2项最具价值的专利技术创新水平均较高的省市不多,我国环境技术创新水平整体水平不高.     

新型单级A/O程序无回流复合膜生物反应器处理氨氮废水的试验

采用单级A/O程序复合膜生物反应器(HSMBR)处理高氨氮废水,研究在低DO浓度下系统对有机物、氨氮和总氮的去除效率。研究结果表明:在低DO浓度下,CODCr、氨氮的平均去除率分别为94.4%和92.8%。由于进水CODCr/TN值仅为2.01,则使得总氮平均去除率仅为69.4%,但是当系统亚硝化累积率从60.5%～67.1%提高到83.5%～86.4%时,系统总氮去除率提高了17.7%。另外,维持低DO浓度可以实现亚硝酸型同时硝化反硝化反应。     

Two-step harmless treatment of secondary aluminum dross (SAD) by vacuum distillation and alkaline roasting

Journal of Material Cycles and Waste Management - Secondary aluminum dross (SAD) is classified as hazardous waste by many countries in the world because it contains a large number of toxic and...     

利用等离子技术治理再生纤维汽车内衬生产过程中的烟气

利用等离子技术,治理树脂聚合法生产再生纤维汽车内饰材料过程中产生的烟气,对等离子净化装置的结构参数、操作参数进行了优化,并对等离子体净化机理进行了分析。利用等离子技术,能够处理常规工艺设备无法治理的极微细可吸入颗粒物和气溶胶烟气;并可同时净化可吸入颗粒物和气态污染物。该设备结构简单、运行费用极低,可在产生烟气的很多行业和领域推广应用。     

土地利用/覆盖变化对长江上游非点源污染影响研究

在国内外相关研究的基础上,利用输出系数模型,结合RS和GIS技术,对长江上游的非点源污染负荷进行了空间模拟和负荷估算.模拟结果表明,在不考虑流域损失的前提下,由于土地利用造成的非点源污染负荷TN总量从20世纪70年代的123万t下降至2000年的116万t,基本呈逐年减少的趋势,由土地利用造成的TP的变化趋势与TN基本相同,从70年代的3.7万t下降到2000年的3.5万t左右.就省份、土地利用类型和水系而言,四川省、种植用地和草地以及金沙江水系和嘉陵江水系对长江上游的非点源污染贡献较大.在非点源污染负荷强度上,重庆市和嘉陵江水系单位面积负荷最高,是今后应重点治理的地区.结果表明,该模型可以对长江上游这样的超大尺度空间的非点源污染进行较好的空间模拟.