聚合氯化铝污泥对磷的吸附动力学及热力学

聚合氯化铝污泥（polyaluminium chloride sludge,PACS）是指以聚合氯化铝（PAC）为混凝剂的城镇给水厂在生产过程中所产生的污泥。采用批量吸附实验考察了PACS对磷的吸附动力学及热力学行为。结果表明,吸附反应发生1 h后,PACS对磷的吸附量达到平衡吸附量的75%～90%,随后PACS对磷的...     

Effects of alkyl polyglycoside (APG) on composting of agricultural wastes

Composting is the biological degradation and transformation of organic materials under controlled conditions to promote aerobic decomposition. To find effective ways to accelerate composting and improve compost quality, numerous methods including additive addition, inoculation of microorganisms, and the use of biosurfactants have been explored. Studies have shown that biosurfactant addition provides more favorable conditions for microorganism growth, thereby accelerating the composting process. However, biosurfactants have limited applications because they are expensive and their use in composting and microbial fertilizers is prohibited. Meanwhile, alkyl polyglycoside (APG) is considered a “green” surfactant. This study aims to determine whether APG addition into a compost reaction vessel during 28-day composting can enhance the organic matter degradation and composting process of dairy manure. Samples were periodically taken from different reactor depths at 0, 3, 5, 7, 14, 21, and 28 days. pH levels, electrical conductivity (EC), ammonium and nitrate nitrogen, seed germination indices, and microbial population were determined. Organic matter and total nitrogen were also measured.Compared with the untreated control, the sample with APG exhibited slightly increased microbial populations, such as bacteria, fungi, and actinomycetes. APG addition increased temperatures without substantially affecting compost pH and EC throughout the process. After 28 days, APG addition increased nitrate nitrogen concentrations, promoted matter degradation, and increased seed germination indices. The results of this study suggest that the addition of APG provides more favorable conditions for microorganism growth, slightly enhancing organic matter decomposition and accelerating the composting process, improving the compost quality to a certain extent.     

Changes of polyamine levels in roots of Sagittaria sagittifolia L. under copper stress

Introduction

The goal of the present study was to investigate the effects of Cu contamination on the above-mentioned biochemical and physiological parameters in order to explore possible prevention strategies against heavy metal stress.

Materials and methods

Effects of copper (Cu) on the roots of Sagittaria sagittifolia L. were studied after 10 days of treatment at five concentration levels. The accumulation of Cu, the generation rate of O₂ ^·?C, the contents of thiobarbituric acid reactive substances (TBARS) and polyamines, as well as the activities of arginine decarboxylase (ADC) and polyamine oxidase (PAO) in the roots were measured and analyzed.

Results and discussion

It was observed that endogenous Cu content increased in roots of S. sagittifolia L. in a concentration-dependent manner, along with an increased production of O₂ ^·?C. TBARS content increased progressively up to 5 ??mol l^?1 Cu. A constant increase in ADC activity was also observed. The results indicated that lower Cu concentrations (2.5 and 5 ??mol l^?1, respectively) had greater enhancing effect on the contents of free Put and perchloric acid-soluble conjugated (PS-conjugated) putrescine (Put), while Cu treatments at different concentration levels had similar enhancing effect on the content of perchloric acid-insoluble bound Put. In total, Put content in each Cu-treated group was higher than that in the control group. PAO activity was inhibited up to 10 ??mol l^?1 Cu but enhanced at higher Cu concentrations (20 and 40 ??mol l^?1). This explained the initial rise and subsequent decline of the contents of all forms of spermine (Spm), free and PS-conjugated spermidine (Spd). However, with the increase of Cu concentration, total Spm content increased gradually while total Spd content decreased. Our results suggest that Cu is phytotoxic to the roots of S. sagittifolia L. at high concentrations, and that the increased Spm level is not sufficient to resist Cu-induced oxidative damages.     

Application of an indicator based on taxonomic relatedness of ciliated protozoan assemblages for marine environmental assessment

Introduction  

Ciliated protozoa play important roles in aquatic ecosystems especially regarding their functions in micro-food web and have many advantages in environmental assessment compared with most other eukaryotic organisms. The aims of this study were focused on analyzing the application of an indicator based on taxonomic relatedness of ciliated protozoan assemblages for marine environmental assessment.     

Arsenic release from arsenic-bearing Fe-Mn binary oxide: effects of E(h) condition

Ferric and manganese binary oxide (FMBO) has been successfully used to remediate arsenic-polluted river, but there still lacks sufficient data to evaluate its effects on environments. The release behaviors of iron (Fe), manganese (Mn), and arsenic (As) in different E_h ranges were investigated for As-bearing FMBO sediment after remediating As-polluted DaSha River by FMBO. Under high E_h range (+550 to +400 mV), slight dissolution of Fe and Mn, which corresponded to 12.2% and 25.6%, and less than 5% of As release were observed in 336 h. Under lower E_h range (+50 to −100 mV), elevated extent of the dissolution of Mn and Fe were observed, which corresponded to as high as 61.3% and 70.1%. Under such conditions, the dissolution rate of Mn was higher than that of Fe. Furthermore, from the established relationship of As release and the dissolution of Fe and Mn, the release of As seemed dominated by the dissolution of Fe. X-ray photoelectron spectroscopy (XPS) analysis demonstrated the release of Fe, Mn, As(III), and As(V) after sodium ascorbate-treatment, and the re-adsorption of As(V), as indicated from the increased binding energy of As 3d from 44.78 to 45.83 eV. Surface element composition analysis indicated significant decrease of Mn from 3.22% to 0.54%, slight increase of Fe from 12.45% to 13.67%, and elevated ratio of As from 0.11% to 0.32% accordingly. The main reactions of Fe and Mn dissolution and the pathways of As release under different E_h ranges were also proposed.     

钛基IrO2-SnO2电极在烟气海水脱硫恢复系统中的应用

采用浸渍-热分解法制备了含IrOx-TiO2中间层的IrO2-SnO2电极,得到的电极具有较高的析氯电催化活性和较强的稳定性,并通过电化学氧化法对Na2SO3海水脱硫模拟液进行处理,考察了电流密度、温度、pH值和电解时间等电解工艺参数对Na2SO3去除率和化学需氧量COD的影响。结果表明,在电流密度为200 mA/cm^2,pH值为3.5,电解440 mg/L的Na2SO3海水脱硫模拟液,15 min时Na2SO3去除率可达96.5%,COD去除率可达82.6%。     

氯氧化锆生产中废碱液的回收利用

建立了以 CaO 为沉淀剂去除废碱液中 SiO2回收 NaOH 的工艺,研究了各工艺因素对siO2去除效果的影响,实验结果表明,CaO 沉淀除去废碱液中 SiO2的最佳工艺条件为:CaO 与废碱液中 SiO2摩尔比 3.0,反应温度80～95℃,反应时间 40～60 min,搅拌转速 200 r/min.在此条件下,S...     

提高炼油废水处理场的氨氮去除率

对炼油废水处理场现有工艺进行流程优化,将MBR装置调整在接触氧化池之后运行.优化流程后氨氮平均去除率可从近于0提高至71.70％;COD平均去除率可从50.00％提高至72.00％.通过对工艺流程的对比,分析了现有工艺氨氮质量浓度难以降低的原因,指出废水中存在的某些污染物对硝化细菌起到抑制作用,减少了反应器中硝化细菌的...     

高压脉冲放电等离子体处理活性红X-3B染料废水

采用高压脉冲放电等离子体技术对活性红X-3B染料废水进行处理,考察了废水电导率、脉冲电压、脉冲频率、针板间距以及曝气量对处理效果的影响。实验结果表明,当废水电导率为200μS/cm、脉冲电压为34kV、脉冲频率为60Hz、针板间距为15mm、曝气量为12L/h、处理时间为60m in时,活性红X-3B染料废水脱色率能达到98.6%。