盐度对人工渗滤系统中煤渣和陶粒除磷过程的影响

以煤渣和陶粒作为填料,通过静态吸附实验对二者的磷吸附动力学和等温吸附过程进行模型拟合,并考察了不同盐度对人工渗滤系统吸附除磷的影响。静态吸附实验结果表明,零盐度下,Elovich模型和双常数模型可较好拟合煤渣吸附除磷过程,而陶粒更符合一级动力学模型,二者吸附机理取决于填料的理化性质;不同盐度下,二者等温吸附过程 Langmuir 方程的拟合效果要好于Freundlich方程;盐度增大总体呈现对磷吸附的抑制作用,但由于盐度增加导致溶液中阴离子与磷酸根离子激烈竞争填料表面吸附位点,二者的吸附量均在1%和1.5% 盐度之间出现反复。人工渗滤系统连续实验结果表明,系统整体受盐度影响趋势与静态吸附实验结果基本一致。     

废旧印刷电路板差速破碎分析

为了解决废旧印刷电路板资源化过程中的粗碎问题,提出差速破碎方法;根据差速机理分析,利用自主研制双齿辊粗碎机对废旧印刷电路板基板进行差速破碎实验;最后利用Ansys APDL模块对粗碎机辊齿进行校核模拟。实验结果证明,利用差速破碎可以充分利用材料的抗拉、抗剪强度小于抗压强度的特性,能够取得良好的破碎效果,差速破碎结果呈拱形分布形式;模拟结果证明,在差速破碎过程中设备能够保持良好工作状态,可以交换2个齿辊的运转速度减小疲劳破坏。差速破碎为废旧印刷电路板资源化过程中的破碎理论提供支持,并且为废旧印刷电路板粗碎的设备选择提供参考。     

改性SCAC催化臭氧氧化去除布洛芬效能与反应活性位点研究

采用不同的表面改性方法(去矿化处理、氧化改性、碱改性和还原改性)对污泥基活性炭(SCAC)进行处理,分别获得了表面金属含量低、碱位低、碱性官能团含量高及Lewis碱含量高的4种改性SCAC(SCAC-D、SCAC-S、SCAC-OH和SCAC-N),对比考察了改性前后SCAC催化臭氧氧化去除布洛芬(IBP)的效能,并探讨了SCAC催化臭氧氧化反应的主要活性位点。结果表明,5种SCAC催化活性顺序为:SCAC-N > SCAC-OH > SCAC > SCAC-S > SCAC-D;金属组分减少会直接影响SCAC的催化活性,碱位减少对其催化活性的影响相对较弱,说明SCAC表面较为丰富的金属组分是其催化臭氧氧化反应的主要活性位点;增加SCAC表面碱位(Lewis碱和碱性官能团),减少表面酸性官能团有助于提高其催化活性。     

CS/PEG/PFT膜制备及对含铜废水的处理

实验将溶胶凝胶法和高分子辅助倒相法结合,制备出一种新型的壳聚糖/聚乙二醇/亚铁氰化钾钛(CS/PEG/PFT)复合膜,通过FT-IR和SEM对膜进行表征后,将其用于模拟铜废水的吸附和脱附实验,并探究出膜吸附的最佳工艺条件为:pH 5.50、实验温度55℃、实验时间2 h,该条件下,膜对铜离子最大吸附量为9.85 mg/g,去除率达到95%以上。CS/PEG/PFT膜的除铜过程符合Langmuir等温吸附方程(y=0.0597x+0.0168),线性相关度达到0.9917。     

初级基质对降解菌Pseudomonas putida共代谢苯扎贝特的影响

通过对3,5-二硝基水杨酸(DNS)法测定还原糖含量各影响因素的筛选,优化确定了显色时间8 min,稳定时间10 min,最佳波长490 nm下进行吸光度测定的检测方法;分析分别以葡萄糖和麦芽糖作为外加碳源时,降解菌Pseudomonas putida B-31的生长情况和共代谢降解典型药物苯扎贝特(BZF)的过程。结果表明,降解菌只有在外加碳源的条件下才可正常生长,而且其在葡萄糖环境中生长得更好;拟合得到的葡萄糖、麦芽糖和BZF代谢动力学结果显示,葡萄糖对BZF去除的促进作用更为明显,同时从葡萄糖培养基中降解菌所提取的酶比活力要高于麦芽糖培养基,分析原因可能是葡萄糖所诱导的降解菌关键酶活力更强,而且还可能会产生不同的蛋白质点位。     

Positive matrix factorization as source apportionment of soil lead and cadmium around a battery plant (Changxing County,China)

Chemical compositions of soil samples are multivariate in nature and provide datasets suitable for the application of multivariate factor analytical techniques. One of the analytical techniques, the positive matrix factorization (PMF), uses a weighted least square by fitting the data matrix to determine the weights of the sources based on the error estimates of each data point. In this research, PMF was employed to apportion the sources of heavy metals in 104 soil samples taken within a 1-km radius of a lead battery plant contaminated site in Changxing County, Zhejiang Province, China. The site is heavily contaminated with high concentrations of lead (Pb) and cadmium (Cd). PMF successfully partitioned the variances into sources related to soil background, agronomic practices, and the lead battery plants combined with a geostatistical approach. It was estimated that the lead battery plants and the agronomic practices contributed 55.37 and 29.28 %, respectively, for soil Pb of the total source. Soil Cd mainly came from the lead battery plants (65.92 %), followed by the agronomic practices (21.65 %), and soil parent materials (12.43 %). This research indicates that PMF combined with geostatistics is a useful tool for source identification and apportionment.     

某场地边坡稳定分析方法的比较研究*

为了对边坡稳定性分析方法进行研究,以某场地高填方边坡和直立边坡为研究对象,基于Geostudio、理正软件以及ANSYS软件,采用M-P法、Bishop法和强度折减法进行边坡稳定分析。结果表明:高填方边坡安全系数为1.3,为稳定边坡;AB,BC,CD段地块间边坡边坡安全系数依次为0.479,0.410,0.381,基坑边坡安全系数为0.436,均为不稳定边坡;其中,M-P法得到的安全系数偏保守,Bishop法得到的安全系数结果较可靠,强度折减法得到的结果最为理想。研究结果可为边坡稳定性研究与治理提供借鉴。     

管道结构对氢/空预混气体爆炸特性影响研究

为研究管道结构对氢-空预混气体爆炸特性影响,采用实验与数值模拟相结合的方法,分析不同管道结构内氢-空预混气体燃爆时火焰传播进程、爆炸压力、湍流动能变化及流场分布.结果表明:90°弯管对氢-空预混气体爆炸强度增强作用明显高于T型分岔管和直管.火焰阵面在结构突变处褶皱变形较明显,并出现大尺度强湍流和涡团,气团脉动速度与湍流...     

环境监测在环保验收工作中的作用

为掌握建设项目污染情况,指出了环境监测工作的重要性,分析了环保验收工作的主要监测内容,提出了监测工作重点:生态环境监测机构、监测设备及标准物质,环境监测人员、监测方案、公众意见调查及信息公开等,做好全天候、多层次、立体化的环境监测工作,提升环境监测质量和效率.     

Modelling of moisture-dependent aerobic degradation of solid waste

In landfill, high temperature levels come from aerobic reactions inside the waste surface layer. They are known to make anaerobic processes more reliable, by partial removal of easily biodegradable substrates. Aerobic biodegradation of the main components of biodegradable matter (paper and cardboard waste, food and yard waste) is considered. In this paper, two models which take into account the effect of moisture on aerobic biodegradation kinetics are discussed. The first one (Model A) is a simple, first order, substrate-related model, which assumes that substrate hydrolysis is the limiting step of the process. The second one (Model B) is a biomass-dependant model, considering biological growth processes. Respirometric experiments were performed in order to evaluate the efficiency of each model. The biological oxygen demands of shredded paper and cardboard samples and of food and yard waste samples prepared at various initial water contents were measured. These experimental data were used to identify model parameters. Model A, which includes moisture dependency on the maximum amount of biodegraded matter, is relevant for paper and cardboard biodegradation. On the other hand, Model B, including moisture effect on the growth rate of biomass is suitable to describe food and yard waste biodegradation.