Effect of photosensitizer diethylamine on the photodegradation of polychlorinated biphenyls

The objective of this study was to investigate the effect of diethylamine and xenon simulated sunlight on the photodegradation of two forms of PCBs including PCBs in transformer oil and PCB congener 138. The result of GC chromatograms illustrated the shifting pattern of higher chlorinated biphenyls in transformer oil degraded to lower chlorinated biphenyls with the extension of exposure time. The effect of diethylamine and xenon simulated sunlight was significant on the photodegradation of both PCBs in transformer oil and congener 138. The initial degradation rates of congener 138 (1.14 x 10(-9) to 4.47 x 10(-9) mol l(-1) h(-1)) were in direct proportion to the initial concentrations of congener 138 which confirmed the pseudo-first-order reaction of PCB photodegradation. The apparent quantum yields (phi) of congener 138 using diethylamine in xenon photoreactor were ranged between 2.08 x 10(-2) and 9.8 x 10(-4). PCB congeners 123, 97, 70, 67, 33, 29, 17, 12, and 9 were detected as the descendants of the photodegradation of congener 138 through dechlorination. The major pathway of congener 138 photodegradation in this study was via para-dechlorination.     

Manganese uptake and accumulation by the hyperaccumulator plant Phytolacca acinosa Roxb. (Phytolaccaceae)

The perennial herb Phytolacca acinosa Roxb. (Phytolaccaceae), which occurs in Southern China, has been found to be a new manganese hyperaccumulator by means of field surveys on Mn-rich soils and by glasshouse experiments. This species not only has remarkable tolerance to Mn but also has extraordinary uptake and accumulation capacity for this element. The maximum Mn concentration in the leaf dry matter was 19,300 microg/g on Xiangtan Mn tailings wastelands, with a mean of 14,480 microg/g. Under nutrient solution culture conditions, P. acinosa could grow normally with Mn supplied at a concentration of 8000 micromol/l, although with less biomass than in control samples supplied with Mn at 5 micromol/l. Manganese concentration in the shoots increased with increasing external Mn levels, but the total mass of Mn accumulated in the shoots first increased and then decreased. At an Mn concentration of 5000 micromol/l in the culture solution, the Mn accumulation in the shoot dry matter was highest (258 mg/plant). However, the Mn concentration in the leaves reached its highest value (36,380 microg/g) at an Mn supply level of 12,000 micromol/l. These results confirm that P. acinosa is an Mn hyperaccumulator which grows rapidly, has substantial biomass, wide distribution and a broad ecological amplitude. This species provides a new plant resource for exploring the mechanism of Mn hyperaccumulation, and has potential for use in the phytoremediation of Mn-contaminated soils.     

农药污染地下水的微生物治理及含水层渗透性变化研究

采用了从农药厂阿特拉津生产车间排污口污泥中分离出的菌种AT菌 ,进行了农药阿特拉津污染地下水微生物治理的模拟实验研究 ,在实验条件 (T =10℃ ,pH =7.5 )与野外含水层的条件基本一致情况下 ,难于生物降解的污染质阿特拉津的一次投菌降解率可达 3 1.0 8% ;设计了两种有效细菌的投放方式以模拟野外条件下的菌种投加条件。另外 ,AT菌的作用会造成被治理含水层的渗透性能降低 ,两种投菌方式下 ,实验后含水层的渗透系数分别下降 60 .5 4%和 3 4 5 6%。清水冲洗 10d的渗透性恢复率分别为 48.96%及 81.3 6% ,说明清水渗透恢复的方法效果明显     

Wet air oxidation of a reactive dye solution using CoAlPO(4)-5 and CeO(2) catalysts

Wet air oxidation of a prepared reactive dye solution was performed to assess the efficacy of CoAlPO(4)-5 and CeO(2) as catalysts in the reaction. Via adsorption and oxidation of dye, CoAlPO(4)-5 effectively decreased American Dye Manufacturers Institute and chemical oxygen demand (COD) values in the dye solution. At a reaction temperature of 135 degrees C and an applied pressure of 1.0 MPa, color and COD removal were as high as 95% and 90%, respectively, after 2 h. Active sites on the outer surface of CoAlPO(4)-5 are responsible for adsorption and decomposition of dye while active sites in the pores dominate further destruction and oxidation of intermediate products. Since the outer surface only represents a minor part of the total surface, the color removal does not increase appreciably with loading of CoAlPO(4)-5. The CeO(2) catalyst, calcined from cerium chloride under high thermal impact (type A CeO(2)) was very effective in removing color and COD from the solution. This catalyst demonstrated near 100% color removal at temperatures above 135 degrees C and the COD removal could be above 95% at 165 degrees C. With both CoAlPO(4)-5 and CeO(2) catalysts, COD rose and then fell back during the reaction, a feature typical of a consecutive reaction. In contrast to prepared CeO(2), a commercial CeO(2) did not exhibit any catalytic ability for the removal of color and COD. The durability of both CoAlPO(4)-5 and prepared CeO(2) is considered to be fair.     

大量三价铬中微量六价铬的分离和测定

研究了大量 Cr( )中微量 Cr( )的分离和测定方法 ,该方法灵敏度高 ,干扰少 ,摩尔吸光系数为 1.6× 10 5L /( m ol·cm )。最佳线性范围 0～ 1.0 m g/L ,检出限为 0 .0 0 2 m g/L。     

球团竖炉烟尘除尘脱硫净化技术设备

本文介绍了球团竖炉的烟尘排放特性 ,分析了烟尘回收效益及脱硫、除尘、除雾一体化技术设备 ,该技术设备是一种紧凑合理、高效耐用、性价比高、管理方便、适合国情的大气环境净化技术设备     

生态农业园区废弃物资源化处理利用研究

本文介绍了蟹岛生态园区农业废气物及生活污水的资源化处理工艺方案 ,通过对沼气池和生活污水厌氧 -好氧 -生态塘处理系统进行综合设计 ,实现了节能环保和废弃物无害化综合处理利用。形成了种植业、养殖业、肥料加工、能源利用和休闲度假有机结合的生态农业经济 ,为实现农村经济可持续发展提供了一种新模式     

白腐菌对芳香族化合物的降解途径

白腐菌 (Whiterotfungi)是目前所发现的对芳香族化合物有很强降解能力的一类微生物。本文探讨了降解芳香族化合物的白腐菌种及其代谢化合物的主要类型 ,分析了对不同化合物的不同代谢途径 ,同时展望了其应用前景     

添加剂升温烧蚀法在制备新型介孔水环境净化材料中的应用

首次探索了一种破坏式造孔与有机复合相结合的新方法以制备介孔复合水环境净化材料,使最终产品成为一种具有广谱孔结构分布的复合环境材料。详细介绍了该方法的第二步工艺即添加剂升温烧蚀法,在优化后的最佳条件下,产品的孔径得到了进一步扩大,其中部分孔道直径可达至介孔级,同时材料的表面得到了进一步活化。经此步工艺后,所制备的中间产品染料吸附量是原材料的194倍,是酸洗刻蚀后产品的122倍;24h吸湿率是原材料的38倍,是酸洗刻蚀后产品的19倍。     

黄磷废水处理技术

黄磷废水成分复杂,含P4、F-和CN-等多种有毒有害物质,污染严重,须经过处理达标后方可排放.目前国内黄磷废水处理通常采用物化法,其又可分为沉淀氧化法和闭路循环法.分别就这2种技术方法的处理过程及优缺点进行了探讨,并对其存在问题的解决提供了思路.