煤矿人为事故发生可能性预测数学模型研究

研究发现，煤矿工人的冒险行为主要可以由生产条件、个人表现、工作状况及用工方式等影响因素预测，煤矿人为事故的发生可能性主要由煤矿工人的冒险行为表现预测。据此，便可建立预测煤矿人为事故发生可能性的数学模型     

江苏省水质全要素代表性监测体系的设计

为了评价并进行城市水环境质量考核排名,介绍了江苏省组织开展涵盖地表水、饮用水、地下水、近岸海域和城市内河5种类型"全要素、代表性"水质监测断面(点位)体系建设工作的情况以及全要素断面设置的基本原则和做法。分苏南、苏北、苏中3个区域,对全省地表水监测代表性进行了量化计算,结果表明,调整后全省水质综合指数极差从41.07降至7.17,标准差从3.16降为0.49;采用德尔斐层次分析法分析,设计了水质代表性指数,含1项一级指标、5项二级指标、12项三级指标,计算表明,调整前全省水质代表性指数得分为69.1分,调整后为88.7分。将调整结果进行论证后再与各市环保主管部门交换意见,取得最终一致后正式实施。     

Path analysis of factors influencing household solid waste generation: a case study of Xiamen Island,China

Comprehensive study of the factors influencing household solid waste (HSW) generation is crucial and fundamental for exploring the generation mechanism and forecasting future dynamics of HSW. A case study of Xiamen Island, China was employed to reveal the direct and indirect effects of demographic/socioeconomic factors on solid waste generation at the urban household scale. Based on a face-to-face questionnaire and two-stage survey of solid waste generation, a path analysis model was built. Results showed that the proposed path model exhibited good fit indices. Family size and dinning-at-home rate (DR), whose coefficients were ?0.40 and 0.43, respectively, were the two major factors influencing HSW directly. Moreover, family size, education level, employment rate and age structure played different degrees of indirect effects on HSW generation through respective paths, which should not be ignored. In terms of total effects, coefficients of family size, DR and employment rate were ?0.46, 0.43 and ?0.37, respectively, which were three most dominant factors influencing HSW generation. As for waste composition, organic waste was the most representative of HSW dynamics, and was the most sensitive to impact by the factors studied. Quantitative results of this study have important policy implications for sustainable municipal solid waste management.     

The application and evaluation research of coffee residue ash into mortar

Coffee residue is usually regarded as a kind of agriculture waste; as its quantity increases the treatment of coffee residue will become an environmental problem. This research is innovative in that it derives the possibility of recycle application using coffee residue ash for cement replacement. In this research, coffee residue is burned in an electronic oven to three kinds of coffee residue ash at 500, 600 and 700 °C, and then appropriate apparatus is used to check the chemical and physical properties of these three types of coffee residue ash. After a general comparison, this study selected 500 and 600 °C coffee residue ashes with 2, 3, 5, 10 and 15 % cement replacements to make 5 cm³ cube mortar specimen to test different curing ages’ compressive strength. Through measurement and experiment, this research found that the compressive strength decreased by adding 500 or 600 °C coffee residue ash into the mortar. By considering waste reduction and practice application, this research derives that using the 600 °C coffee residue ash with 10 % replacement is better than others application, such using result also can get valuable efficiencies of financial and CO₂ reduction.     

基于数值模拟的城市中心区风环境研究

利用CFD软件对长沙市中心区典型区域的风环境进行了三维数值模拟研究。结果表明,城市建筑群布局不当会造成多方面不利影响:如建筑群内局部地区气流不畅,污染物难以扩散,影响市民身体健康;街道峡谷风使得行人行动不便,冬季热舒适感差;复杂的风环境可能造成建筑构件的损坏乃至脱落,对地面行人的安全造成威胁;建筑围护结构渗透风增加造成建筑能耗的增加。在城市规划和建设中,中心区风环境状况要引起足够的重视,在建设之前要进行风环境模拟与评估。     

可燃气体燃爆特性综合试验装置构建与甲烷试验

为研究半开敞空间内可燃气体爆炸过程,设计带有泄压面的气体爆炸室,并在此基础上构建一套可燃气体燃爆特性综合试验装置。运用该试验装置,研究预混塔内甲烷气体分层现象以及甲烷爆炸浓度与最小点火能之间的变化规律。甲烷分层试验结果表明:静置一段时间后,预混塔中甲烷浓度随高度的增加而增大。最小点火能试验结果显示,当甲烷的试验爆炸体积分数在10%～13%时,其浓度与点火能之间呈现比较平缓的变化关系,而当其体积分数小于10%或大于13%时,浓度稍微变化,其点火能将发生明显变化。     

Quantitative indicator of homeostatic risk perception in car following

Driving behavior is largely affected by the risk perception of drivers. On the basis of risk homeostasis theory, we regard that drivers may adjust car movement according to the perceived risks fluctuating around a target level. However, the manner by which risk perception is quantified remains unclear. We propose assumptions on the quantitative indicators of risk perception and identify a suitable quantitative indicator of risk perception in car-following process. Three risk indicators are discussed, i.e. time-to-collision (TTC), time headway (TH), and safety margin (SM). Using homeostatic features as bases, we found that SM more suitably quantifies homeostatic risk perception than TTC or TH does. Data collected from video drive recorders installed in taxis operating in Beijing are used to analyze the target risk level of SM (desired SM, or DSM) of professional drivers during the car-following process. The data collected by Ahn et al. (2004) to verify Newell’s model are converted into DSM data to further analyze the target risk level of general drivers. The DSM histogram of professional drivers shows that the standard deviation of the DSM value is 0.115, with a mean value of 0.862 and a total distribution close to the normal distribution. For a general driver, the mean value of DSM is 0.896, which is higher than that of professional drivers. This research may shed lights on the understanding of driving behavior.     

Biohydrogen production using waste activated sludge as a substrate from fructose-processing wastewater treatment

Biohydrogen production by dark fermentation in a series of batch tests under different environmental control conditions was evaluated to determine the optimal initial cultivation pH and temperature for a continuous-flow kinetic test to validate the kinetic model system. The waste activated sludge (WAS) from fructose-processing manufacturing was used as the model substrate for biohydrogen production. The batch experiments for biohydrogen production were conducted in a 6 l bioreactor. Fifteen batch kinetic tests were investigated when pH was controlled at 6, 7, 8 and 9 as well as the temperature was controlled at 37 °C, 45 °C and 55 °C, respectively. The experimental results indicated that the optimal operational condition for hydrogen production occurred while pH was 7 and temperature was 55 °C with the highest hydrogen production of 7.8 mmol. The optimal recovery time for hydrogen was 25 h in the batch experiments. Furthermore, the kinetic test of biohydrogen production was performed by anaerobic mixed microbial culture in the continuous-flow experiment when pH and temperature was maintained at 7 and 55 °C. Approximately 60% and 7% of substrate solution was converted into acetate and hydrogen, respectively, at the steady state. Roughly only 0.77% and 2.7% of substrate solution was converted into propionate and butyrate, respectively, at a steady-state condition. The experimental and modeling approaches presented in this study could be employed for the design of pilot-scale and full-scale anaerobic biohydrogen fermentors using food-processing waste activated sludge (WAS) as a substrate solution.     

基于满意度的热风炉变论域模糊控制

针对热风炉具有参数时变、强干扰、非线性等特点,其最佳空燃比难以确定的问题,提出一种基于模糊满意度的变论域模糊控制方法。首先通过在线获得加热过程的状态参数,采用满意度函数对空燃比进行评价,并将该评价结果和炉温变化作为变论域模糊控制方法的输入来实时获取最优的空燃比值,从而保证热风炉炉温的温度控制。实际运行结果证实了该系统的有效性。     

Fermentative hydrogen production from beet sugar factory wastewater treatment in a continuous stirred tank reactor using anaerobic mixed consortia

A low pH, ethanol-type fermentation process was evaluated for wastewater treatment and bio-hydrogen production from acidic beet sugar factory wastewater in a continuous stirred tank reactor (CSTR) with an effective volume of 9.6 L by anaerobic mixed cultures in this present study. After inoculating with aerobic activated sludge and operating at organic loading rate (OLR) of 12 kgCOD?m^-3·d^-1, HRT of 8h, and temperature of 35°C for 28 days, the CSTR achieved stable ethanol-type fermentation. When OLR was further increased to 18 kgCOD?m^-3·d^-1 on the 53rd day, ethanol-type fermentation dominant microflora was enhanced. The liquid fermentation products, including volatile fatty acids (VFAs) and ethanol, stabilized at 1493 mg·L^-1 in the bioreactor. Effluent pH, oxidation-reduction potential (ORP), and alkalinity ranged at 4.1–4.5, -250–(-290) mV, and 230–260 mgCaCO₃?L^-1. The specific hydrogen production rate of anaerobic activated sludge was 0.1 L?gMLVSS^-1·d^-1 and the COD removal efficiency was 45%. The experimental results showed that the CSTR system had good operation stability and microbial activity, which led to high substrate conversion rate and hydrogen production ability.