Antimony smelting process generating solid wastes and dust：Characterization and leaching behaviors

A large amount of solid waste has been produced by the antimony smelting process in the＂World Capital of Antimony＂, Xikuangshan area in China. This study comprehensively investigated the physical and chemical characteristics of the various solid wastes, as well as the leaching behavior of the solid wastes, which included water-quenched slag,arsenic-alkali residue, desulfurized slag and blast furnace dust. These four types of waste were enriched in a variety of heavy metals and metalloids and more specifically with As and Sb levels up to 8.6 × 104 and 3.16 × 105mg/kg, respectively, in arsenic-alkali residue. For desulfurized slag and water-quenched slag, the leaching concentration of Sb significantly exceeded the acceptable limits during the leaching tests using the toxicity characteristic leaching procedure and the synthetic precipitation leaching procedure. In addition, As leaching in arsenic-alkali residue was extraordinarily hazardous, being three orders of magnitude higher than the regulatory level of As. According to the results of the extraction tests, all the tested wastes were classified as hazardous waste.     

Photocatalytic activity of Fe-doped CaTiO3 under UV-visible light

The photocatalytic degradation of methylene blue（MB） over Fe-doped CaTiO3 under UV-visible light was investigated. The as-prepared samples were characterized using X-ray diffraction（XRD）, scanning electron microscope（SEM） equipped with an energy dispersive spectrometer（EDS） system, Fourier transform infrared spectra（FT-IR）, and UV-visible diffuse reflectance spectroscopy（DRS）. The results show that the doping with Fe significantly promoted the light absorption ability of CaTiO3 in the visible light region. The Fe-doped CaTiO3 exhibited higher photocatalytic activity than CaTiO3 for the degradation of MB.However, the photocatalytic activity of the Fe-doped CaTiO3 was greatly influenced by the calcination temperature during the preparation process. The Fe-doped CaTiO3 prepared at500°C exhibited the best photocatalytic activity, with degradation of almost 100% MB（10 ppm）under UV-visible light for 180 min.     

Quantitative method to determine the regional drinking water odorant regulation goals based on odor sensitivity distribution：Illustrated using 2-MIB

Taste and odor （T/O） in drinking water often cause consumer complaints and are thus regulated in many countries. However, people in different regions may exhibit different sensitivities toward WO. This study proposed a method to determine the regional drinking water odorant regulation goals （ORGs） based on the odor sensitivity distribution of the local population. The distribution of odor sensitivity to 2-methylisobomeol （2-MIB） by the local population in Beijing, China was revealed by using a normal distribution function/model to describe the odor complaint response to a 2-MIB episode in 2005, and a 2-MIB concentration of 12.9 ng/L and FPA （flavor profile analysis） intensity of 2.5 was found to be the critical point to cause odor complaints. Thus the Beijing ORG for 2-MIB was determined to be 12.9 ng/L. Based on the assumption that the local FPA panel can represent the local population in terms of sensitivity to odor, and that the critical FPA intensity causing odor complaints was 2.5, this study tried to determine the ORGs for seven other cities of China by performing FPA tests using an FPA panel from the corresponding city. ORG values between 12.9 and 31.6 ng/L were determined, showing that a unified ORG may not be suitable for drinking water odor regulations. This study presents a novel approach for setting drinking water odor regulations.     

Characteristics of atmospheric particles and heavy metals in winter in Chang-Zhu-Tan city clusters, China

To understand the pollution characteristics of atmospheric particles and heavy metals in winter in Chang-Zhu-Tan city clusters, China, total suspended particulate(TSP) and PM10samples were collected in cities of Changsha, Zhuzhou and Xiangtan from December 2011 to January 2012, and heavy metals of Cd, Pb, Cr, and As were analyzed. It shows that the average TSP concentration in Changsha, Zhuzhou and Xiangtan were(183 ± 73),(201 ± 84) and(190 ± 66) μg/m3respectively, and the average PM10 were(171 ± 82),(178 ± 65) and(179 ± 55) μg/m3respectively. The lowest TSP and PM10concentrations occurred at the background Shaping site of Changsha. The average ratio of ρ(PM10)/ρ(TSP) was 91.9%, ranging from 81.3% to 98.9%. Concerning heavy metals, in TSP samples, the concentration of Cr, As, Cd and Pb were 28.8–56.5, 18.1–76.3, 3.9–26.1 and 148.0–460.9 ng/m3, respectively, while in PM10samples, were 16.4–42.1, 15.5–67.9, 3.3–22.2 and 127.9–389.3 ng/m3, respectively. The enrichment factor of Cd was the highest, followed by Pb and As, while that of Cr was the lowest.     

南京市黑臭河流水体中细菌多样性的研究

以南京市城南河为研究对象,分别提取上中下游的水体样本,分析水质中的氮、磷、COD等水质指标,并利用变性梯度凝胶电泳技术(DGGE)分析了城南河不同位置的细菌多样性。结果表明:城南河水体中的平均总氮为30.06 mg/L,总磷为6.14 mg/L,COD为42.03 mg/L,均超过国家V类水质标准。结合外观,城南河属于严重污染的典型黑臭河流。DGGE分析的结果表明:城南河具有较高的细菌多样性,优势菌群主要是变形菌门和拟杆菌门2大类群,且不同取样点细菌种类差别不大。     

电厂燃煤锅炉颗粒物分段去除效率及成因分析

选取某大型发电企业进行实测,根据测试数据计算颗粒物去除装置对颗粒物的分段去除效率。结果表明:静电除尘器除尘效率为99.91%、湿法脱硫装置除尘效率为60.51%、湿法脱硫装置出口相对静电除尘器进口的颗粒物去除效率为99.61%、湿法脱硫装置出口颗粒物浓度是静电除尘器出口颗粒物浓度的4.18倍。此外,也依据计算结果并结合实际情况分析了影响各除尘段颗粒物去除效率的主要成因,这些成因主要包括各除尘段功能、脱硫剂与脱硫副产品的颗粒物、脱硫装置运行平稳性等,期望本研究成果能对电厂燃煤锅炉大气污染控制设施关系调整、重新设计及大气环境污染治理思路调整提供重要科学依据与指导。     

便携β射线法手工监测PM_(2.5)的可行性研究

提出利用自动射线原理结合重量法的简捷便携特点的便携射线仪手工监测PM2.5的思路,平行比对了便携射线法和手工重量法所测60组PM2.5浓度的监测结果,采用线性回归及T检验、F检验等理论分析了两者数据结果间的有效性和可比性。结果表明,便携式射线仪监测结果与重量法监测结果之间有效可比且得到了两者间的线性回归方程;此外进行了20组数据的实样验证,换算值和真值之间相对误差在8%以内,因而确定了便携射线仪手工监测PM2.5的可行性。     

影响实验室检测结果准确性的因素分析

环境监测实验室的检测结果直接为环境管理、污染治理等环保部门提供服务,因此检测数据的准确性十分重要。本文通过对影响环境监测实验室检测结果的因素人、机、料、法、环五个方面入手,详尽地研究这五个方面对检测结果的影响。     

储油罐区防火堤受力情况分析

利用ANSYS有限元分析软件,对防火堤受液态物质冲击时受力状况进行模拟,并对防火堤在冲击载荷下的受力情况进行了分析,指出防火堤在事故状态下的脆弱部分,对油库的安全设计、评价和日常维护具有参考价值。     

燃煤电厂锅炉PM2.5排放危害度评价模型建立及案例分析

为评价燃煤电厂锅炉PM2.5排放的危害度,根据颗粒的形成机制及对环境和人体健康的影响程度,将PM2.5进行了粒径分段,综合考虑不同粒径段颗粒物的质量浓度、粒数浓度、汞相对富集因子及汞元素在煤灰分中含量,建立了燃煤锅炉PM2.5排放危害度综合评价模型,最后利用已有文献现场实验测得的数据对评价模型进行了案例分析,并提出了危害度削减系数概念,可用于对除尘装置进行评价.