等效温度曲线的数值拟合

通风空调工程中,等效温度是衡量气候舒适程度的主要指标.传统的查图法求解等效温度不仅繁琐,而且不准确.本文以等效温度为基础,在等效温度图中取值,运用Matlab拟合数据,并进行坐标变换,求解出干球温度、湿球温度及风速之间的规律,推导出等效温度的数值求解方法.经实例计算和误差分析证明,此数值解法较为准确.     

Application of SO(4)(2-)/TiO2 solid superacid in decontaminating radioactive pollutants

Polyaniline doped with SO(4)(2-)/TiO(2) superacid shows good conductive ability. When used in a strippable coating film for decontaminating radioactive pollutants, the SO(4)(2-)/TiO(2) solid superacid replacing HCl exhibits higher electrical conductivity (7.01 s/cm) and a decontamination ratio higher than 97%. Coating and electrolyzing the film in solution or in dry medium were effective methods, the latter was more promising for decontaminating radioactive pollutants which were attached to the surface or within the body of equipments used in nuclear industry.     

浅谈质量/环境/职业健康安全一体化管理体系的建立与实施

介绍了运用管理的系统方法,策划、推进及实施质量/环境/职业健康安全一体化管理体系的做法,并对各阶段体系建立的方法与措施进行了阐述.     

地震灾害紧急救援可支配交通链路选择研究

如何通过科学的算法提前获取决定路网通达性的关键链路,即可支配链路,从而可通过各方面养护措施提高可支配链路的抗震能力,保证震后救援运输的顺利进行。提出可支配链路的相关概念,基于矩阵结构的计算方法与原理,并应用算例进行验证。通过选取云南省保山市隆阳区的部分目标区域来进行震后救援路网的支配性链路计算,同时针对地震发生后的特点,综合考虑医疗救援、火灾救援及紧急物资救援3方面的综合救援需求,获得该区域路网的可支配链路。研究结果表明:结合震后实际救援需求,将需求点扩展为多个需求点,能够进一步获得在多个需求点基础上的可支配链路。因此,利用矩阵结构获得可支配链路的方法,能够综合需求点数量和概率临界值的进一步调整,进一步优化计算结果。     

特警战训服面料开发技术研究

本文介绍了以芳纶纤维为主要材料的我国新一代特警战训服面料的技术研发及达到的主要性能指标。通过试验研究,开发了具有高强防撕裂、永久阻燃、耐高温、防静电、防油拒水、防酸碱等具有集成防护功能的特警战训服系列面料。     

防护鞋靴有害物质限量值研究

本文对防护鞋靴有害物质限量值研究进行了阐述。参考国内外标准,设定防护鞋靴有害物质限制项目和限量值。在检测分析我国具有市场代表性的16个防护鞋靴产品中有害物质含量数据基础上,判断设定限制项目及限量值的可行性。检测结果表明我国防护鞋靴生产技术水平基本能够达到限量要求,设定的限量值可以作为制定国家标准的参考依据。     

Influence of low molecular weight anionic ligands on the sorption of heavy metals by soil constituents: a review

Environmental Chemistry Letters - The sorption of heavy metals by soil constituents reduces the absorption of these pollutants by crops and vegetables, and thus limit food contamination. Low...     

Male reproductive toxicity involved in spermatogenesis induced by perfluorooctane sulfonate and perfluorooctanoic acid in Caenorhabditis elegans

Environmental Science and Pollution Research - As a persistent organic pollutant, perfluorooctane sulfonate (PFOS) and perfluorooctanoic acid (PFOA) have gained increasing research attention over...     

Adsorption of Ammonium by Graphene Oxide-Based Composites Prepared by UV Irradiation and Using as Slow-Release Fertilizer

A novel sodium alginate-grafted poly(acrylic acid)/graphene oxide (NaAlg-g-PAA/GO) composite hydrogel was prepared via ultraviolet irradiation, and characterized by infrared spectroscopy spectrometer. X-ray diffraction, X-ray photoelectron spectroscopy and scanning electron microscopy. It was employed to adsorb NH₄⁺ from aqueous solution and used as slow-release nitrogen fertilizers (SNFs). Result indicated that the adsorption process for NH₄⁺ reached equilibrium within 50 min, with the adsorption capacity of 6.6 mmol g^?1 even if 30 wt% GO was incorporated. The results of adsorption kinetic and isotherm were well described by the pseudo-second-order and Freundlich model. The thermodynamics analysis showed the adsorption process was spontaneous. The study indicated excellent water-holding ratio of soil with 2 wt% SNFs was 81.2%, and nitrogen release was up to 55.1% within 40 days in soil. Overall, NaAlg-g-PAA/GO could be considered as an efficient adsorbent for the recovery of nitrogen with the agronomic reuse as a fertilizer.