投加聚氨酯泡沫微生物固定化载体的SBBR脱氮除磷实验研究

研究投加聚氨酯泡沫微生物固定化载体的SBBR脱氮除磷效果及机理.在SBR中填充聚氨酯泡沫微生物固定化载体,形成序批式生物膜反应器(SBBR).SBBR以实际生活污水为处理对象,在A/O运行工况下对微生物进行培养驯化,并在SBBR运行稳定时研究其脱氮除磷效果.研究结果表明,SBBR中的聚氨酯泡沫微生物固定化载体在空间上形...     

汉江流域水污染现状及污染源调查

评价了汉江流域水质污染现状：汉江流域干流水质好于支流,从上游至下游污染状况逐渐上升,主要污染物为COD、TP、NH3-N,污染特征为有机污染型。对汉江流域污染源进行了调查：汉江流域面源污染大于点源,排放负荷较大的是农业地表径流、城镇生活污水、畜禽养殖。     

3,4-二氯苯胺与取代芳烃联合毒性的定量构效关系研究

采用细菌生长抑制实验测定了取代芳烃及其混合物对长江水中混合细菌的急性毒性,得到17种单一化合物的半数抑制浓度(IC50)及22组混合物的半数抑制浓度(IC50mix).采用毒性单位法和混合毒性指数法对联合毒性效应进行了定性评价,3,4-二氯苯胺与胺类化合物的联合效应以简单相加或部分相加作用为主,而3,4-二氯苯胺与酚类化合物的联合效应则多表现为协同作用.以化合物的辛醇/水分配系数(lgP)和分子最低空轨道能(ELUMO)为结构描述符,分别建立了单一毒性和联合毒性的定量构效关系(QSAR)模型.所得模型对极性麻醉型化合物和反应性化合物的毒性都具有较强的预测能力,不仅能预测3,4-二氯苯胺与取代芳烃不同配比的二元混合物的联合毒性,也能预测三元和四元混合物的联合毒性.     

化工企业风险可接受标准研究

分析归纳了一些国家和地区个体风险和社会风险,首次提出以人群自然死亡率为基础,确定个体风险制定的基础,把化工企业个体风险分为三类,分别为单个或少量暴露人员场所、居住类高密度场所和特别敏感的目标对应的个体风险,与国家安全生产监督管理总局规定危险化学品重大危险源产生的个体风险基本吻合.采用ALARP原则,合理确定社会风险并划分为不可接受区、尽可能降低区和风险可容许区.风险标准值的制定为企业风险管理和风险决策提供更加有意义的参考,也为化工企业开展定量风险评估提供技术支撑.     

氯氰菊酯降解菌的筛选鉴定及其降解特性研究

从农药厂废水排放口附近的污泥中分离到1株能降解氯氰菊酯的细菌LQ-3.根据其形态、生理生化特征和16S rDNA(GenBank Accession No.FJ222585)序列分析,将该菌株鉴定为Starkeya sp..LQ-3菌株只能以共代谢方式降解氯氰菊酯,在有酵母粉、蛋白胨、葡萄糖等营养物质存在的条件下,5 d内对20 mg·L-1氯氰菊酯的降解率达到72.1%.LQ-3菌株降解氯氰菊酯的最适温度为30 ℃左右,pH值为7～8.LQ-3菌株还能降解功夫菊酯、甲氰菊酯、联苯菊酯和溴氰菊酯.酶的定域试验表明,LQ-3菌株降解氯氰菊酯的酶属于胞外酶.     

东北地区降水年内分配的不均匀性

利用东北地区93个台站1961-2005年的逐日降水资料,通过降水集中度和降水集中期,讨论了该地区降水的年内分配不均匀分布特征.结果表明,东北地区的降水集中度自东南向西北逐渐递减;集中期具有南北高中问低的变化特点.从长期趋势上看,降水集中度的减小趋势显著,在该地区的东北部和西北部各有一个趋势明显的区域(通过0.05的显著性检验),但集中期的减小趋势不显著,只有2个台站通过显著性检验.年降水量与降水集中度和降水集中期的相关系数表明:东北地区年降水量与降水集中度呈显著的正相关,即年降水量越多(少)的地区,年内降水越集中(均匀);年降水量与降水集中期的关系并不显著.     

Sulfamethoxazole sorption by sediment fractions in comparison to pyrene and bisphenol A

The environmental behavior of antibiotics has attracted great research attention. However, their sorption mechanisms in soils/sediments are still unknown. Comparison of the sorption properties between the widely-studied hydrophobic organic contaminants (HOCs) and antibiotics may provide valuable insight to antibiotic sorption mechanisms. Thus, in this study batch experiments for pyrene (PYR), bisphenol A (BPA), and sulfamethoxazole (SMX) sorption were conducted on a sediment sample and its separated fractions. Our results showed the high sorption of PYR on black carbon and organic matter. Although high sorption of SMX was observed for both separated organic fractions (humic acids) and inorganic mineral particles, the original sediment particles showed relatively low sorption. Competitive sorption between SMX and dissolved humic acid on mineral particles was observed in this study. This competitive interaction is a unique process for antibiotic sorption in soils/sediments compared with apolar HOCs and may be one of the important factors controlling the antibiotic sorption.     

Water Remediation: PVA-Based Magnetic Gels as Efficient Devices to Heavy Metal Removal

Scientific and technological researches are devoted to obtain materials capable of retaining different kinds of pollutants, contributing to contamination solutions. In this context, hydrogels have emerged as great candidates because of their excellent absorption properties as well as good mechanical, thermal and chemical properties. More specifically, ferrogels (magnetic gels) present the extra advantage of being easily manipulated by a permanent magnet. Here, we present the results derived from the application of ferrogels as efficient tools to extract heavy metal pollutants from wastewater samples. The gels were prepared following the method of freezing and thawing of a polyvinyl alcohol aqueous solution with magnetic nanoparticles coated with polyacrylic acid. Ferrogels were fully characterized and their ability to retain Cu²⁺ and Cd²⁺, as model heavy metals, was studied. Thus kinetics and mechanisms of adsorption were evaluated and modeled. The concentration of MNPs on the PVA matrix was key to improve the adsorption capability (approximately the double of retention is improved by the MNPs addition). The adsorption kinetics was determined as pseudo-second order model, whereas the Langmuir model was the most appropriate to explain the behavior of the gels. Finally reuse ability was evaluated to determine the real potential of these materials, the ferrogels demonstrated high efficiency up to about five cycles, retaining about 80–90% of their initial adsorption capability. All the results indicated that the materials are promising candidates able to compete with the commercial technology regarding to water remediation.     

Effects of Natural and Artificial Weathering on the Physical Properties of Recycled Poly(ethylene terephthalate)

In accelerated weathering tests, specimens are exposed to higher radiation intensity, temperature and humidity than is likely under natural weathering in order to achieve rapid degradation of the polymer in a convenient short time. In the current work, a correlation between the two environments is attempted so that a prediction of lifetimes in the natural environment can be achieved. During aging, surface flaws are created due to the chain scission process. This is initiated by the absorption of ultra-violet light and directly affects visual appearance and impact strength. After natural weathering, the material shows only plastic deformation in an impact test. However, after artificial weathering to 5000 h of UV exposure, there is a decrease of 85% in impact strength. Colour change occurs at a high rate in the early stages of UV exposure. Beyond 2000 h of exposure, the colour change approaches a steady state and a correlation between the changes under natural and artificial weathering becomes apparent for a potential prediction of lifetimes. From the analysis including the specular component (SCI), taking surface roughening into account, 1 year under natural weathering was found to be equivalent to 25 days under accelerated weathering.     

Enhanced degradation of the antibiotic tetracycline by heterogeneous electro-Fenton with pyrite catalysis

There is actually increasing concern about the accumulation of antibiotics, such as tetracycline, in soil and water bodies. There is therefore a need for efficient methods to degrade antibiotics and thus clean waters. Here we tested the degradation of tetracycline using the heterogeneous electro-Fenton-pyrite method and compared the results with the conventional electro-Fenton method. The reaction was performed with a boron-doped diamond or Pt anode and carbon-felt cathode allowing electrogeneration of H₂O₂ from O₂ reduction. Results show an increasing tetracycline mineralization using the following methods: anodic oxidation with electrogenerated H₂O₂, electro-Fenton and then electro-Fenton-pyrite using boron-doped diamond. Ion-exclusion HPLC revealed the complete removal of malic malonic, succinic, acetic, oxalic and oxamic acids. Nitrogen present in tetracycline was mainly mineralized in NH₄ ⁺. The higher efficiency of electro-Fenton-pyrite is explained by self-regulation of soluble Fe²⁺ and pH to 3.0 from pyrite catalyst favoring larger ^·OH generation from Fenton’s reaction.