Quantitative method to determine the regional drinking water odorant regulation goals based on odor sensitivity distribution：Illustrated using 2-MIB

Taste and odor （T/O） in drinking water often cause consumer complaints and are thus regulated in many countries. However, people in different regions may exhibit different sensitivities toward WO. This study proposed a method to determine the regional drinking water odorant regulation goals （ORGs） based on the odor sensitivity distribution of the local population. The distribution of odor sensitivity to 2-methylisobomeol （2-MIB） by the local population in Beijing, China was revealed by using a normal distribution function/model to describe the odor complaint response to a 2-MIB episode in 2005, and a 2-MIB concentration of 12.9 ng/L and FPA （flavor profile analysis） intensity of 2.5 was found to be the critical point to cause odor complaints. Thus the Beijing ORG for 2-MIB was determined to be 12.9 ng/L. Based on the assumption that the local FPA panel can represent the local population in terms of sensitivity to odor, and that the critical FPA intensity causing odor complaints was 2.5, this study tried to determine the ORGs for seven other cities of China by performing FPA tests using an FPA panel from the corresponding city. ORG values between 12.9 and 31.6 ng/L were determined, showing that a unified ORG may not be suitable for drinking water odor regulations. This study presents a novel approach for setting drinking water odor regulations.     

Characteristics of atmospheric particles and heavy metals in winter in Chang-Zhu-Tan city clusters, China

To understand the pollution characteristics of atmospheric particles and heavy metals in winter in Chang-Zhu-Tan city clusters, China, total suspended particulate(TSP) and PM10samples were collected in cities of Changsha, Zhuzhou and Xiangtan from December 2011 to January 2012, and heavy metals of Cd, Pb, Cr, and As were analyzed. It shows that the average TSP concentration in Changsha, Zhuzhou and Xiangtan were(183 ± 73),(201 ± 84) and(190 ± 66) μg/m3respectively, and the average PM10 were(171 ± 82),(178 ± 65) and(179 ± 55) μg/m3respectively. The lowest TSP and PM10concentrations occurred at the background Shaping site of Changsha. The average ratio of ρ(PM10)/ρ(TSP) was 91.9%, ranging from 81.3% to 98.9%. Concerning heavy metals, in TSP samples, the concentration of Cr, As, Cd and Pb were 28.8–56.5, 18.1–76.3, 3.9–26.1 and 148.0–460.9 ng/m3, respectively, while in PM10samples, were 16.4–42.1, 15.5–67.9, 3.3–22.2 and 127.9–389.3 ng/m3, respectively. The enrichment factor of Cd was the highest, followed by Pb and As, while that of Cr was the lowest.     

南京市黑臭河流水体中细菌多样性的研究

以南京市城南河为研究对象,分别提取上中下游的水体样本,分析水质中的氮、磷、COD等水质指标,并利用变性梯度凝胶电泳技术(DGGE)分析了城南河不同位置的细菌多样性。结果表明:城南河水体中的平均总氮为30.06 mg/L,总磷为6.14 mg/L,COD为42.03 mg/L,均超过国家V类水质标准。结合外观,城南河属于严重污染的典型黑臭河流。DGGE分析的结果表明:城南河具有较高的细菌多样性,优势菌群主要是变形菌门和拟杆菌门2大类群,且不同取样点细菌种类差别不大。     

电厂燃煤锅炉颗粒物分段去除效率及成因分析

选取某大型发电企业进行实测,根据测试数据计算颗粒物去除装置对颗粒物的分段去除效率。结果表明:静电除尘器除尘效率为99.91%、湿法脱硫装置除尘效率为60.51%、湿法脱硫装置出口相对静电除尘器进口的颗粒物去除效率为99.61%、湿法脱硫装置出口颗粒物浓度是静电除尘器出口颗粒物浓度的4.18倍。此外,也依据计算结果并结合实际情况分析了影响各除尘段颗粒物去除效率的主要成因,这些成因主要包括各除尘段功能、脱硫剂与脱硫副产品的颗粒物、脱硫装置运行平稳性等,期望本研究成果能对电厂燃煤锅炉大气污染控制设施关系调整、重新设计及大气环境污染治理思路调整提供重要科学依据与指导。     

便携β射线法手工监测PM_(2.5)的可行性研究

提出利用自动射线原理结合重量法的简捷便携特点的便携射线仪手工监测PM2.5的思路,平行比对了便携射线法和手工重量法所测60组PM2.5浓度的监测结果,采用线性回归及T检验、F检验等理论分析了两者数据结果间的有效性和可比性。结果表明,便携式射线仪监测结果与重量法监测结果之间有效可比且得到了两者间的线性回归方程;此外进行了20组数据的实样验证,换算值和真值之间相对误差在8%以内,因而确定了便携射线仪手工监测PM2.5的可行性。     

影响实验室检测结果准确性的因素分析

环境监测实验室的检测结果直接为环境管理、污染治理等环保部门提供服务,因此检测数据的准确性十分重要。本文通过对影响环境监测实验室检测结果的因素人、机、料、法、环五个方面入手,详尽地研究这五个方面对检测结果的影响。     

储油罐区防火堤受力情况分析

利用ANSYS有限元分析软件,对防火堤受液态物质冲击时受力状况进行模拟,并对防火堤在冲击载荷下的受力情况进行了分析,指出防火堤在事故状态下的脆弱部分,对油库的安全设计、评价和日常维护具有参考价值。     

燃煤电厂锅炉PM2.5排放危害度评价模型建立及案例分析

为评价燃煤电厂锅炉PM2.5排放的危害度,根据颗粒的形成机制及对环境和人体健康的影响程度,将PM2.5进行了粒径分段,综合考虑不同粒径段颗粒物的质量浓度、粒数浓度、汞相对富集因子及汞元素在煤灰分中含量,建立了燃煤锅炉PM2.5排放危害度综合评价模型,最后利用已有文献现场实验测得的数据对评价模型进行了案例分析,并提出了危害度削减系数概念,可用于对除尘装置进行评价.     

春节期间南京市大气气溶胶粒径分布特征

为研究春节期间燃放烟花爆竹对城市大气气溶胶数浓度粒径谱分布的影响,对2012年1月19~31日南京大气气溶胶数浓度、污染气体浓度和质量浓度进行了观测分析.结果表明,烟花爆竹的燃放期间10~20 nm气溶胶浓度远低于非燃放期,50~100、100~200和200~500 nm数浓度有较大增加,20~50 nm和0.5~10μm气溶胶数浓度变化不大.烟花爆竹的燃放对气溶胶数浓度谱影响较大,非燃放期数浓度谱为双峰型分布;在燃放期数浓度谱为单峰性分布,且峰值向大粒径段偏移.烟花爆竹燃放期间质量浓度谱为双峰型分布,对细粒子的质量浓度影响较大,燃放期间PM2.5/PM10和PM1.0/PM10的值可升高10%.烟花爆竹的大量燃放对1.0~2.1μm粒径段气溶胶密度影响最大,对其他粒径段密度影响较小.     

基于GLUE法的多指标水质模型参数率定方法

目前对水质模型进行参数率定通常利用计算机算法来实现,但由于水质模型日趋复杂的非线性结构往往会导致"异参同效"现象,无法通过单个似然度判断参数的取值是否能够取得真值.为避免这一情况,本文提出了一套基于GLUE法的多目标模型参数率定方法,并以WASP水质模型的应用为例,通过Sobol方法确定模型的敏感参数,并利用DO、CBOD、氨氮、硝态氮4项指标的似然函数对参数同时进行率定.结果表明,该方法既可以有效地避免因追求"过拟合"而造成模型参数取值不当,也可以减小模型参数的不确定性,为具有"异参同效"现象的复杂模型的参数率定工作提供了一个更为可靠的方法.