Statistical regression modeling for energy consumption in wastewater treatment

Wastewater treatment is one of critical issues faced by water utilities, and receives more and more attentions recently. The energy consumption modeling in biochemical wastewater treatment was investigated in the study via a general and robust approach based on Bayesian semi-parametric quantile regression. The dataset was derived from a municipal wastewater treatment plant, where the energy consumption of unit chemical oxygen demand (COD) reduction was the response variable of interest. Via the proposed approach, the comprehensive regression pictures of the energy consumption and truly influencing factors, i.e., the regression relationships at lower, median and higher energy consumption levels were characterized respectively. Meanwhile, the proposals for energy saving in different cases were also facilitated specifically. First, the lower level of energy consumption was closely associated with the temperature of influent wastewater, and the chroma-rich wastewater also showed helpful in the execution of energy saving. Second, at median energy consumption level, the COD-rich wastewater played a determinative role in the reduction of energy consumption, while the higher quality of treated water led to slightly energy intensive. Third, the higher level of energy consumption was most likely to be attributed to the relatively high temperature of wastewater and total nitrogen (TN)-rich wastewater, and both of the factors were preferably to be avoided to alleviate the burden of energy consumption. The study provided an efficient approach to controlling the energy consumption of wastewater treatment in the perspective of statistical regression modeling, and offered valuable suggestions for the future energy saving.     

膜电解技术处理含氯及重金属的废酸

采用离子交换膜电解技术处理铜冶炼过程产生的含氯及重金属的废酸。考察了废酸处理工艺、电解温度、电解时间、电流密度和催化剂的添加等条件对处理效果的影响。实验结果表明：采用先沉淀重金属后脱氯的废酸处理工艺,氯离子和铜离子的去除效果均较好;当以钛盐为催化剂时,在电解温度为40 ℃、电解时间为2.0 h、电流密度为825 A/m²的最佳工艺条件下,处理后废酸中的氯离子质量浓度为0.22 g/L,氯离子去除率为98.59%,铜离子质量浓度为0.45 g/L,铜离子去除率为95.08%,其他重金属大部分也得到有效去除。净化后的废酸可回用至铜冶炼的生产过程中。     

长江中下游稀土元素的水环境地球化学特征

采用中子活化分析技术同步研究了稀土元素在长江干流中下游水体各要素中的含量分布及其赋存形态。结果表明，稀土元素在河水中以悬浮态为主，溶解态含量极微。溶解态在中下游各河段呈均匀分布，与不同地带的河流也基本一致。而悬浮态含量较高，变幅较大。各河段的悬浮物或沉积物中稀土元素含量相近，悬浮物与沉积物中相应各稀土元素含量也基本一致。各河段悬浮物与沉积物的稀土元素分布模式均为轻稀土富集、铕亏损型，各稀土元素赋存形态特征相似，均以结晶态为主，各形态所占比例的排序均为结晶态》有机结合态、铁锰氧化物态＞碳酸盐结合态＞＞可交换态。各稀土元素相对比较，中稀土元素Ｅｕ、Ｓｍ、Ｔｂ的结晶态较轻、重稀土的结晶态所占比例低、而其它态相反。     

低温等离子体氧化水中难降解有机物研究

实验将介质阻挡放电与电晕放电组合在同一个反应器内,实验废水为直接大红染料溶液,将高压电极上通人50 Hz交流高压电,介质阻挡放电系统的电极间距为30 mm、电晕放电系统电极间距为25 mm、电源电压20 kV,利用常压空气中形成的雾化水电极介质阻挡放电/电晕放电低温等离子体及其活性基团作用于难降解有机物分子.实验分析了...     

螯合树脂去除丙烯酸丁酯废水中的二价阳离子

采用氨基膦酸螯合树脂C-900去除丙烯酸丁酯废水中的二价阳离子,考察了吸附温度和废水流量对树脂动态吸附性能的影响,并用Thomas模型进行动态吸附数据的拟合分析。实验结果表明,在吸附温度为35℃、废水流量为15SV的条件下,处理后出水中3种二价阳离子总质量浓度为1.0mg/L时的穿透体积为240BV,达到穿透体积时树脂对Ca²⁺,Mg²⁺,Cu²⁺的去除率分别为100%,99.2%,99.8%。     

Formation and speciation of disinfection byproducts during chlor(am)ination of aquarium seawater

The chemistry associated with the disinfection of aquarium seawater is more complicated than that of freshwater, therefore limited information is available on the formation and speciation of disinfection byproducts(DBPs) in marine aquaria. In this study, the effects of organic precursors, bromide(Br-) and pre-ozonation on the formation and speciation of several typical classes of DBPs, including trihalomethanes(THM4), haloacetic acids(HAAs),iodinated trihalomethanes(I-THMs), and haloacetamides(HAc Ams), were investigated during the chlorination/chloramination of aquarium seawater. Results indicate that with an increase in dissolved organic carbon concentration from 4.5 to 9.4 mg/L, the concentrations of THM4 and HAAs increased by 3.2–7.8 times under chlorination and by 1.1–2.3 times under chloramination. An increase in Br-concentration from 3 to 68 mg/L generally enhanced the formation of THM4, I-THMs and HAc Ams and increased the bromine substitution factors of all studied DBPs as well, whereas it impacted insignificantly on the yield of HAAs. Pre-ozonation with 1 mg/L O3 dose substantially reduced the formation of all studied DBPs in the subsequent chlorination and I-THMs in the subsequent chloramination. Because chloramination produces much lower amounts of DBPs than chlorination, it tends to be more suitable for disinfection of aquarium seawater.     

两级氧化法处理油田压裂返排液

采用两级氧化法处理油田压裂返排液。在次氯酸钠、次氯酸钙、过氧化氢、高锰酸钾4种氧化剂中,次氯酸钠的氧化效果最好。以次氯酸钠作为一级氧化剂,进行一级氧化处理;再分别采用次氯酸钙、过氧化氢、高锰酸钾进行二级氧化处理。在次氯酸钠加入量为40mL/L、一级氧化反应时间为30min、二级氧化反应时间为30min、初始废水COD为3976mg/L的条件下,二级氧化剂过氧化氢、次氯酸钙、高锰酸钾的最佳加入量分别为80,40,40mL/L,对应的COD去除率分别为82.60%,71.50%,83.50%。     

新形势下河北省农村可再生能源管理与政策研究

我国农村可再生能源发展面临生态文明建设、能源安全趋紧、大气污染严重等新的形势变化。作为农业大省,河北省近年来农村可再生能源发展与管理成绩显著,为改善农民生活、保护生态环境、增加能源供应、促进经济社会发展等做出了积极贡献。但新形势下,其农村可再生能源管理也暴露出了思想认识不足、部分法规政策滞后、缺乏宏观科学规划、资金筹措机制单一、后续监督管理不够等问题,需要从加强宣传教育、提高认识水平,完善规章制度、形成法律体系,制定科学规划、明确目标计划,拓宽融资渠道、稳定资金支持、完善服务体系、加强后续管理等方面完善管理与政策,以推进其健康持续发展。     

利用钢铁盐酸酸洗废液在填料塔中制备FeCl3

以钢铁盐酸酸洗废液为原料,亚硝酸钠为催化剂,氧气为氧化剂,在填料塔中催化氧化制备三氯化铁。考察了反应温度、催化剂加入量和添加方式、循环流量等对制备三氯化铁的影响。实验结果表明,在优化的工艺条件为料液预热温度为60 ℃、催化剂加入量为钢铁盐酸酸洗废液总质量的0.30%、料液循环流量6.0 m³/h的条件下,反应80~120 min,酸洗废液中的Fe²⁺完全氧化为Fe³⁺。     

丙烯腈生产废水中聚合物的资源化利用

以丙烯腈生产废水中的丙烯腈低聚物为原料制备聚丙烯酰胺。通过正交实验考察了水解反应条件和交联反应条件对反应的影响。FTIR表征结果显示,丙烯腈低聚物中的氰基已完全水解为酰胺基,产物聚丙烯酰胺中含有酰胺基和羧基。实验结果表明,在自来水加入量100 m L、水解反应温度95℃、m(Na OH)∶m(丙烯腈低聚物)=2.0、水解反应时间3 h的最佳水解反应条件,交联反应温度60℃、质量分数37%~40%的甲醛加入量6 m L、交联反应时间2 h的最佳交联反应条件下,处理20 g丙烯腈低聚物,可得到产物聚丙烯酰胺14.50 g,聚丙烯酰胺的水解度为21.1%、相对分子质量为2.7×106。产品性能满足Q/SH 0046—2007《钻井液用聚丙烯酰胺技术要求》中部分水解聚丙烯酰胺的性能要求。