UK interpretation and implementation of the EEC Shellfish directive

The EEC Shellfish Directive is a policy designed to protect and, where necessary, improve the quality of designated shellfish waters. Its implementation within the UK, however, has had no effect upon water quality for two reasons. First, the policy has important defects, having ambiguities concerning public health provisions and lacking designation criteria. Second, UK government has sought to achieve formal compliance, while at the same time ensuring that its full financial impact on public expenditure has been contained. Consequently, only those fisheries which already comply with water quality standards have been designated. Within Wales, one fishery has been designated, while other, commercially more important, but grossly contaminated shellfisheries have not.     

Miscibility and Biodegradability of Poly(Butylene Succinate)/Poly(Butylene Terephthalate) Blends

As one of the biodegradable polymers, the blend of poly(butylene succinate) and poly(butylene terephthalate) is dealt with in this study. In our previous work, it was demonstrated that PBS and PBT are immiscible not only from the changes of T _g but also from logG–log G plots. It is expected that the biodegradability of the blends could be improved by enhancing the miscibility. We tried to induce the transesterification reaction between two polyesters with various time intervals to enhance the miscibility of the blends. The extent of transesterification reaction was examined by ¹H-NMR. We utilized a dynamic mechanical thermal analyzer and a rotational rheometer to investigate the changes in miscibility. We also verified the biodegradability of PBS/PBT blends after the transesterification reaction by the composting method.     

Linking rights and standards: the process of developing "rights-based" minimum standards on food security, nutrition and food aid

This article examines the recent revision of the Sphere Minimum Standards in disaster response relating to food security, nutrition and food aid. It describes how the revision attempted to incorporate the principles of the Humanitarian Charter, as well as relevant human rights principles and values into the Sphere Minimum Standards. The initial aim of the revision was to ensure that the Sphere Minimum Standards better reflected the principles embodied in the Humanitarian Charter. This was later broadened to ensure that key legal standards and principles from human rights and humanitarian law were considered and also incorporated, in part to fill the "protection gap" within the existing standards. In relation to the food security, nutrition and food aid standards, it was agreed by participants in the process that the human right to adequate food and freedom from hunger should be incorporated. In relation to more general principles underlying the Humanitarian Charter, itself drawn largely from human rights and humanitarian law, it was agreed that there was a need to strengthen "protection" elements within the standards and a need to incorporate the basic principles of the right to life with dignity, non-discrimination, impartiality and participation, as well as to explore the relevance of the concept of the progressive realisation of the right to food. The questions raised in linking rights to operational standards required thought, on the one hand, about whether the technical standards reflected a deep understanding of the values expressed within the legal instruments, and whether the existing standards were adequate in relation to those legal rights. On the other hand, it also required reflection on how operational standards like Sphere could give concrete content to human rights, such as the right to food and the right to be free from hunger. However, there remain challenges in examining what a rights-based approach will mean in terms of the role of humanitarian agencies as duty-bearers of rights, given that the primary responsibility rests with state governments. It will also require reflection on the modes and mechanisms of accountability that are brought to bear in ensuring the implementation of the Minimum Standards.     

Pilot‐scale evaluation using bioaugmentation to enhance PCE dissolution at dover AFB national test site

An Interstate Technology and Regulatory Council (ITRC) forum was recently held that focused on six case studies in which bioremediation of dense nonaqueous‐phase liquids (DNAPLs) was performed; the objective was to demonstrate that there is credible evidence for bioremediation as a viable environmental remediation technology. The first two case studies from the forum have been previously published; this third case study involves a pilot‐scale demonstration that investigated the effects of biological activity on enhancing dissolution of an emplaced tetrachloroethene (PCE) DNAPL source. It used a controlled‐release test cell with PCE as the primary DNAPL in a porous media groundwater system. Both laboratory tests and a field‐scale pilot test demonstrated that bioaugmentation can stimulate complete dechlorination to a nontoxic end product and that the mass flux from a source zone increases when biological dehalorespiration activity is enhanced through nutrient (electron donor) addition and bioaugmentation. All project goals were met. Important achievements include demonstrating the ability to degrade a PCE DNAPL source to ethene and obtaining significant information on the impacts to the microbial populations and corresponding isotope enrichments during biodegradation of a source area. © 2007 Wiley Periodicals, Inc.     

COST REDUCTIONS DUE TO SEASONAL VARIATION IN MUNICIPAL WASTE WATER TREATMENT LEVELS1

ABSTRACT: Varying treatment levels to meet seasonal variation in assimilative capacity of streams can reduce total costs of treatment. A mathematical model of a Pennsylvania stream based on a theoretically sound approximation of the physical relationships underlying the distribution of DO in a river system was used to determine discharge constraints for an economic optimization model which produced estimates of sewage treatment cost savings. Increasing the number of flow periods during the year enhances cost reducing opportunities even when land application processes are considered. Also, the least cost treatment process for year around operation may not be the least costly under multiple flow period management.     

Seasonal characteristics of chemically apportioned aerosol optical properties at Seoul and Gosan,Korea

Seasonal variations of aerosol optical properties in Seoul (polluted urban site) and Gosan (coastal background site), Korea, with an emphasis on the relative humidity were investigated using ground-based aerosol measurements and optical model calculations. The mass fraction of elemental carbon was 9–20%, but the optical contribution of these particles to light extinction was higher, up to 33–55% in Seoul. In Gosan, the contribution of non-sea-salt water-soluble aerosols on extinction was 81–93% due to the high mass fraction of these particles. Based on daily MODIS datasets, our analysis showed that the aerosol optical depths at Seoul and Gosan were highest in spring due to the influence of dust particles. The aerosol water content at Gosan, calculated using a thermodynamic equilibrium model, was higher than that at Seoul; this was attributed to the high relative humidity and high fraction of water-soluble aerosols at Gosan. At Seoul, despite abundant water vapors in summer, the possibility of hygroscopic growth of water-soluble aerosols was not more significant than that at Gosan.     

Process design for the environment: A multi-objective framework under uncertainty

Designing chemical processes for the environment requires consideration of several indexes of environmental impact including ozone depletion, global warming potentials, human and aquatic toxicity, photochemical oxidation, and acid rain potentials. Current methodologies, such as the generalized waste reduction algorithm (WAR), provide a first step towards evaluating these impacts. However, to address the issues of accuracy and the relative weights of these impact indexes, one must consider the problem of uncertainties. Environmental impacts must also be weighted and balanced against other concerns, such as their cost and long-term sustainability. These multiple, often conflicting, goals pose a challenging and complex optimization problem, requiring multi-objective optimization under uncertainty. This paper will address the problem of quantifying and analyzing the various objectives involved in process design for the environment. Towards this goal, we proposed a novel multi-objective optimization framework under uncertainty. This framework is based on new and efficient algorithms for multi-objective optimization and for uncertainty analysis. This approach finds a set of potentially optimal designs where trade-offs can be explicitly identified, unlike cost-benefit analysis, which deals with multiple objectives by identifying a single fundamental objective and then converting all the other objectives into this single currency. A benchmark process for hydrodealkylation (HDA) of toluene to produce benzene modeled in the ASPEN simulator is used to illustrate the usefulness of the approach in finding environmentally friendly and cost-effective designs under uncertainty.     

A new approach to characterize biodegradation of organics by molecular mass distribution in landfill leachate

This study provides biodegradability of organics in leachate according to their molecular mass distributions (<0.5, 0.5 to 1, 1 to 3, 10, and >10 KDa). Organics with molecular mass values lower than 0.5 KDa were the predominant species in the raw leachate filtrate, and the aerated lagoon process was very effective in treating these highly biodegradable organics; the Fenton's oxidation process was very effective in treating not-so-biodegradable organics with molecular mass values higher than 0.5 KDa, but a portion of these organics were converted into organics <0.5 KDa after Fenton's oxidation. An oxygen uptake measurement using a respirometer was more sensitive than a conventional biochemical oxygen demand measurement to evaluate bioactivities, especially when bioactivities were low.     

Prediction of effluent concentration in a wastewater treatment plant using machine learning models

Of growing amount of food waste, the integrated food waste and waste water treatment was regarded as one of the efficient modeling method. However, the load of food waste to the conventional waste treatment process might lead to the high concentration of total nitrogen(T-N) impact on the effluent water quality. The objective of this study is to establish two machine learning models—artificial neural networks(ANNs) and support vector machines(SVMs), in order to predict 1-day interval T-N concentration of effluent from a wastewater treatment plant in Ulsan, Korea. Daily water quality data and meteorological data were used and the performance of both models was evaluated in terms of the coefficient of determination(R~2), Nash–Sutcliff efficiency(NSE), relative efficiency criteria(d rel). Additionally, Latin-Hypercube one-factor-at-a-time(LH-OAT) and a pattern search algorithm were applied to sensitivity analysis and model parameter optimization, respectively. Results showed that both models could be effectively applied to the 1-day interval prediction of T-N concentration of effluent. SVM model showed a higher prediction accuracy in the training stage and similar result in the validation stage.However, the sensitivity analysis demonstrated that the ANN model was a superior model for 1-day interval T-N concentration prediction in terms of the cause-and-effect relationship between T-N concentration and modeling input values to integrated food waste and waste water treatment. This study suggested the efficient and robust nonlinear time-series modeling method for an early prediction of the water quality of integrated food waste and waste water treatment process.