水葫芦厌氧发酵工程化应用研究

在实验室进行了接种率、破碎程度和温度等对水葫芦厌氧发酵产气率的影响研究.结果表明:水葫芦在中温35℃下,水葫芦和接种污泥的最佳接种率为1:1(总固体物质比),经简单切分后产气率最高,原料产气率为0.540 m3/d(以每千克固体含量计,下同);高温消化与中温消化相比,产气率无明显优势.在实验室研究基础上,对中国农村地区原有的沼气发酵工艺进行适当的改进,设计构建了5 m3 15 m3(酸化池 产气池)两级反应池,该反应池在夏季常温条件下运行良好,80 d的平均原料产气率达0.305 m3/d.     

生物质废弃物快速热解制取富氢气体的实验研究

采用管式炉对红松锯屑快速热解制取富氢气体进行了实验研究,分析了反应器温度、物料粒径和催化剂对热解产物组成的影响.结果表明高温能加快生物质快速热解进程,减少炭和焦油生成量,利于富氢气体的生成,800℃时气态产物比例可达56.9 wt.%,气态产物中H2体积分数由4.3%(500℃下)上升至17.2%,H2 CO体积分数达68.3%.小粒径能增大热解气态产物的比例,但对气态产物组成的影响很小,这可能与红松锯屑本身质地疏松有关.以与生物质直接混合方式添加的煅烧白云石能使热解产物中H2含量增加,但造成产气过程变缓,炭生成量增多,富氢气体总产量未能得到提高.     

蒽醌化合物的光解动力学及定量结构-性质关系

以高压汞灯为光源, 测定了15 种蒽醌化合物(ATQs)的光解速率常数(k), 讨论了取代基位置、数目及种类对ATQs 光解速率的影响.另外,选取9 种氨基蒽醌, 应用偏最小二乘(PLS)算法, 建立了关于k的定量结构-性质关系(QSPR)模型. 根据该模型, 决定k值大小的主要因素包括:分子生成热、H 原子所带最大正电荷、C 原子所带最大负电荷,以及分子最低未占据轨道与最高占据轨道能量差.     

CDM Project Activities in China＇s Iron and Steel Industry：Current Status,Barriers and Development Strategies

China is now facing huge pressure from both the domestic concern of energy security and the global community's call for emission reduction commitment. As one of the major energy consumers and greenhouse gas emitters, China's iron and steel industry has a huge clean development mechanism (CDM) potential. This article both quantitatively and qualitatively analyzes the current status of CDM project activities in the iron and steel industry in China, including characteristics of approved project types, applicable methodologies, and potential technology fields. From the perspective of project implementation, the article summarizes development barriers such as high investment risk, difficulty in project identification, strict requirements on PPDs, long registration waiting time, and etc. Policy suggestions are also put forwarded to help better promote the development of CDM projects in the iron and steel industry.     

中国水泥行业节能减排的潜力与成本分析

全球水泥的温室气体排放约占人类活动排放的5%,其中中国的水泥产量就占到世界总量的50%,连续25年居世界第一位,2010年中国水泥总产量达到18.8亿t。水泥行业是我国排放和耗能的大户,其产业特点是总体产量高,企业平均规模小、技术水平低和产品结构落后,因而,水泥行业节能减排行动是我国应对气候变化的重要措施和基本内容,也是实现我国水泥工业可持续发展的重要保证。本文通过大量的实地调研和数据收集,在识别了18种水泥行业节能减排的典型技术基础上,以日产5 000 t的生产线作为基准,通过边际减排成本的测算,定量分析了我国水泥行业节能减排技术的减排潜力和成本,并最终得到这些技术的边际减排成本曲线,按照减排成本由低到高的排序,主要的减排技术分为能源利用效率、替代能源、混合水泥和CCS技术。最后通过分析我国水泥行业节能减排的技术现状及相关的政策障碍,给出了相应的应对措施和政策建议。     

滇池流域水资源综合平衡管理研究

随着滇池治理的进展,在今后一个时期内,恢复滇池饮用水环境功能,成为滇池治理的首要目标和任务。围绕滇池流域水资源供求平衡,采用水资源全要素配置框架下的三次平衡分析理论,从整体上分析了滇池流域水资源供求平衡关系及存在的主要问题,提出了以需求为导向,建立滇池流域水资源综合平衡管理目标和措施。分析表明：在滇池治理的基础上,通过建立滇池流域水资源综合平衡管理体系,落实管理措施,从总量平衡的理论上能够充分发挥引水工程的作用,恢复滇池饮用水环境功能,实现水量、水质供求的综合平衡。建议进一步开展量化分析和模拟实验研究,为在滇池流域实施综合平衡管理提供可靠依据和建议     

The determination and matching analysis of pinch point temperature difference in evaporator and condenser of organic rankine cycle for mixed working fluid

Exergo-economic analysis of the pinch point temperature difference (PPTD) in both evaporator and condenser of sub-critical organic Rankine cycle system (ORCs) are performed based on the first and second laws of thermodynamics. Taking mixture R13I1/R601a as a working fluid and the annual total cost per net output power Z as exergo-economic performance evaluation criterion, the effects of PPTD in evaporator ΔT_e, and the PPTD ratio of condenser to evaporator y, on the exergo-economic performance of ORCs are analyzed. Moreover, how some other parameters influence the optimal PPTD in evaporator ΔT_e,opt and the optimal PPTD ratio of condenser to evaporator y_opt are also discussed. It has been found that the exergo-economic performance of ORCs is remarkably influenced by ΔT_e and y, and there exists ΔT_e,opt and y_opt. In addition, ΔT_e,opt and y_opt are affected by heat transfer coefficient ratio of condenser to evaporator ß, the temperature of working fluid at dew point in condenser T_1a, and composition of R13I1/R601a: larger ß and T_1a lead to lower ΔT_e,opt and y_opt; by contraries, larger mass fraction of R13I1 makes ΔT_e,opt and y_opt increase, and y_opt increases linearly. The effects of the temperature of working fluid at bubble point in evaporator T_3a, mass flow rate of exhaust flue gas m_g, and inlet temperature of exhaust flue gas T_gi on ΔT_e,opt and y_opt are very slight. For comparison, three additional working fluids, namely R601a, R245fa, and 0.32R245fa/0.68R601a, are also taken into account.     

A comparison of the low frequency electrical signatures of iron oxide versus calcite precipitation in granular zero valent iron columns

Geophysical methods have been proposed as technologies for non-invasively monitoring geochemical alteration in permeable reactive barriers (PRBs). We conducted column experiments to investigate the effect of mineralogy on the electrical signatures resulting from iron corrosion and mineral precipitation in Fe0 columns using (a) Na2SO4, and (b) NaHCO3 plus CaCl2 mixture, solutions. At the influent interface where the reactions were most severe, a contrasting time-lapse electrical response was observed between the two columns. Solid phase analysis confirmed the formation of corrosion halos and increased mineralogical complexity in the corroded sections of the columns compared to the minimal/non-corroded sections. We attribute the contrasting time-lapse signatures to the differences in the electrical properties of the mineral phases formed within the two columns. While newly precipitated/transformed polarizable and semi-conductive iron oxides (mostly magnetite and green rust) increase the polarization and conductivity of the sulfate column, the decrease of both parameters in the bicarbonate column is attributed to the precipitation of non-polarizable and non-conductive calcite. Our results show that precipitate mineralogy is an important factor influencing the electrical properties of the corroded iron cores and must be considered if electrical geophysical methods are to be developed to monitor PRB barrier corrosion processes in situ.     

Characteristics and assessment of phthalate esters in urban dusts in Guangzhou city, China

Phthalate esters (PAEs) were examined in indoor and outdoor dust samples from the subtropical city of Guangzhou, China. The ∑(16)PAEs concentrations ranged from 121 to 3,223 μg g(-1) dust, with the median concentration of 840 μg g(-1) dust. Significantly higher concentrations of PAEs in dust samples were found in offices where electrical and electronic devices, carpet pads, and office furniture were widely used. Of the 16 PAEs, diisobutyl phthalate (DiBP), di-n-butyl phthalate (DnBP), and di(2-ethylhexyl) phthalate (DEHP) dominated the PAEs in indoor and outdoor dust samples, and accounted for >96.8% and >93.1% of the ∑(16)PAEs concentrations, respectively. The median daily inhalation exposure of ∑(16)PAEs were 3.53 and 0.247 μg kg(-1) body weight day(-1), and at the 95(th) percentile were 7.62 and 0.530 μg kg(-1) body weight day(-1), up on the measured concentrations and estimated dust ingestion rates, respectively, for toddles and adults. The ubiquitous distribution of PAEs as noted in this study suggests the need for detailed assessment of PAEs concentrations using more sites and to further investigate the factors influencing PAEs exposure in China.     

Characteristic, composition, and sources of TSP investigated by HRTEM/EDS and ESEM/EDS

Total suspended particle (TSP) collected at the fifth floor of House Dust in Hunan University, China, was analyzed in terms of microscopic morphology and chemical composition. The fine particles (50?nm-2?μm) in the TSP were analyzed by a high-resolution transmission electron microscope equipped with an energy-dispersive X-ray analyzer (HRTEM/EDS). Results showed that the particles were in shapes of plate, irregular and agglomerate. Based on EDS results, these fine particulate matter was primarily composed of Fe-rich (35.82-61.29%), Ca-rich (30.18-36.77%) and Si-rich (18.95-32.28%) particles. Other elements mainly including Mg (0.47-4.97%), Al (0.45-14.57%), S (0.45-4.73%), K (1.13-2.13%) and Zn (0.67-3.85%) were also observed. The sources analysis indicated that the HRTEM particles mainly originated from coal combustion, traffic emission, vehicles exhaust emission and fugitive soil or cement particulate matter. The coarse particles (4-50?μm) were detected by environmental scanning electron microscopy coupled with energy-dispersive X-ray detector (ESEM/EDS). Based on a simple algorithm, ESEM particles were categorized into five groups: C-bearing (46.15%, 67% and 86.98%), Si + Ca-bearing (21.48?+?11.80%, 16.51?+?10.81% and 16.32?+?10.62%), Si + Al-bearing (20.06?+?12.40%, 20.16?+?11.22% and 15.31?+?11.25%), Si-bearing (34.40%, 26.92% and 27.15%) particles and aggregates, most of which exhibit obvious crystalline structure, and these ESEM particles mainly derived from vehicles exhaust emission, coal combustion, soil, and biomass burning, while the aggregates are indicative of atmospheric reaction progress. HRTEM/EDS and ESEM/EDS are mutual complementary in analyzing the characteristic and determining the sources of TSP.