Effects of water-emulsified fuel on a diesel engine generator’s thermal efficiency and exhaust

Water-emulsified diesel has proven itself as a technically sufficient improvement fuel to improve diesel engine fuel combustion emissions and engine performance. However, it has seldom been used in light-duty diesel engines. Therefore, this paper focuses on an investigation into the thermal efficiency and pollution emission analysis of a light-duty diesel engine generator fueled with different water content emulsified diesel fuels (WD, including WD-0, WD-5, WD-10, and WD-15). In this study, nitric oxide, carbon monoxide, hydrocarbons, and carbon dioxide were analyzed by a vehicle emission gas analyzer, and the particle size and number concentration were measured by an electrical low-pressure impactor. In addition, engine loading and fuel consumption were also measured to calculate the thermal efficiency. Measurement results suggested that water-emulsified diesel was useful to improve the thermal efficiency and the exhaust emission of a diesel engine. Obviously, the thermal efficiency was increased about 1.2 to 19.9%. In addition, water-emulsified diesel leads to a significant reduction of nitric oxide emission (less by about 18.3 to 45.4%). However, the particle number concentration emission might be increased if the loading of the generator becomes lower than or equal to 1800 W. In addition, exhaust particle size distributions were shifted toward larger particles at high loading. The consequence of this research proposed that the water-emulsified diesel was useful to improve the engine performance and some of exhaust emissions, especially the NO emission reduction.

Implications:The accumulated test results provide a good basis to resolve the corresponding pollutants emitted from a light-duty diesel engine generator. By measuring and analyzing transforms of exhaust pollutant from this engine generator, the effects of water-emulsified diesel fuel and loading on emission characteristics might be more clear. Understanding reduction of pollutant emissions during the use of water-emulsified diesel helps improve the effectiveness of the testing program. The analyzed consequences provide useful information to the government for setting policies to curb pollutant emissions from a light-duty diesel engine generator more effectively.     

共存物质对重金属絮凝剂 MCC 除镉性能的影响简

为进一步拓展天然高分子絮凝剂壳聚糖的应用范围,以壳聚糖、L-半胱氨酸为原料,通过酰胺化反应制备一种具有重金属捕集功能的高分子重金属絮凝剂-2-氨基-3-巯基丙酰壳聚糖（MCC）,研究了水体中常见的阴阳离子、有机配位剂及浊度对MCC除镉性能的影响,探讨了絮体形貌与絮体分形维数及絮凝除镉效果间的关系。结果表明,Na⁺、Cl^-、NO₃^-、F^-、SO₄^2-的存在对MCC除Cd²⁺均有促进作用,Ca²⁺表现为明显的抑制作用;低浓度的EDTA对除镉有促进作用,随着EDTA浓度的增大,逐渐转为抑制作用;低浓度的腐殖酸对MCC去除Cd²⁺有显著的促进作用;在一定范围内,浊度可促进 MCC对Cd²⁺的去除;絮体间空隙越多,絮体分形维数越小,除镉效果越好。     

湖库型水体总氮总量控制目标的区域分配研究

基于层次分析法原理,以资源禀赋、社会经济、农业生产生活、污染治理水平为主要考虑因素设计指标体系和层次结构,建立了湖库型水体总氮总量控制目标分配方法,并在石头口门水库流域进行了应用,为湖库型水体总氮总量控制目标分配及石头口门水库流域总氮总量控制提供借鉴。     

广东某大型城市生活垃圾焚烧厂9种重金属的迁移特征

采集广东某大型城市生活垃圾焚烧厂一期(WI-A)和二期(WI-B)的进厂垃圾、渗滤液、飞灰、底渣和烟气样品,分析了各样品中砷、镉、钴、铬、铜、汞、镍、铅、锌共9种重金属含量,研究重金属的迁移特征。结果显示,9种重金属呈现4类不同的迁移特征,钴、铜、镍、铬主要迁移至底渣中,锌、砷、铅主要迁移至底渣和飞灰中,镉主要迁移至飞灰中,汞主要迁移至飞灰和烟气中。活性炭吸附和布袋除尘器的组合对除汞以外的重金属治理效果明显。WI-A和WI-B垃圾中的汞分别约有28%、37%随烟气排到环境中。     

“十二五”畜禽养殖污染减排问题及防治对策

对中国"十二五"前3年畜禽养殖业污染减排实践中存在的问题和面临的困境进行了分析和梳理,针对问题依据各地养殖现状核算了各区域耕地粪污承载负荷。据此提出种养结合是区域适宜的粪污治理思路,为地方政府与环境主管部门推进畜禽养殖污染防治和粪污资源化利用提出了建议。     

添加炭基材料对蔬菜废物好氧堆肥进程和腐熟度的影响

以蔬菜废弃物辣椒秸秆和树叶为堆肥原料(CK),采用密闭式好氧堆肥工艺,研究了添加5%木本泥炭(T1)、5%活性炭(T2)和10%木本泥炭(T3)等炭基材料对堆肥p H、EC、CO2累积量、物料损失率、T值、C/N和发芽率指数的影响。结果显示,T2处理的p H在60 d后维持在8~9之间;EC值随着堆肥进行呈现先下降后升高再下降的趋势,最终CK、T1、T2和T3处理的EC值(m S/cm)分别降低了1.02、0.76、0.33和0.48;T2和T3处理的CO2累积量一直高于其他处理;所有处理的物料损失率均在20%以上;4个处理堆肥产品的T值分别为0.56、0.65、0.68和0.69;堆肥产品的发芽率指数分别为63.2%、69.3%、93.5%和86.1%。T值和发芽率指数显示T2和T3处理达到了腐熟阶段。结果表明,在蔬菜堆肥处理中添加炭基材料可改善堆肥产品的理化性质,加速堆肥物料的分解,有效地缩短堆肥周期和提高堆肥产品的腐熟度。     

试论国有矿山企业档案管理的特征

以国有矿山企业档案建设为依托,系统分析了企业档案管理的现状与特征,提出了档案管理与建设的发展方向,进一步加快矿山企业档案管理与建设步伐,以促进矿山企业现代化建设.     

Congener-specific accumulation and environmental risk assessment of polybrominated diphenyl ethers in diverse Korean sewage sludge types

Industrial, domestic wastewater, and livestock sludge samples were collected from 23 wastewater treatment plants in Korea and analyzed for polybrominated diphenyl ethers (PBDEs). The concentrations of Σ₁₉PBDE ranged from 4.01 to 10,400 ng/g dry weight. The average Σ₁₉PBDE concentrations in industrial, domestic wastewater, and livestock sludge were 1,560?±?3,610, 402?±?148, and 27.6?±?50.4 ng/g dry weight, respectively. The composition of PBDEs differed according to the type of sludge. Among the PBDE congeners, BDE 209 was dominant in all sludge samples. After BDE 209, relatively high levels were found for BDE 28 and 47 from industrial sludge, BDE 47 and 99 from domestic wastewater sludge, and BDE 206, 207, and 208 from livestock sludge. Using hierarchical cluster analysis, sludges were divided into three groups according to PBDE congener composition. A risk assessment of PBDEs in sludge used for soil amendment was carried out. Preliminary results indicated that the potential risk of soil exposed to PBDEs in sludge was relatively low.     

西北干旱地区农宅雨水转化为可饮水技术

雨水集流工程对于解决干旱地区人民生活用水问题起着重要作用,甘肃省兰州市榆中县北山地区处于严重缺水的地区,人畜的饮用水为雨水、雪水直接沉淀后的水窖水。经过对北山饮用水进行水质检测,发现水中浊度、锰含量、微生物数量均超过《生活饮用水卫生标准》(GB5749-2006)的规定值。通过对传统滤池进行改造并结合阳光消毒研制出了一种新型水处理器——阳光消毒-生物砂滤池(SBF)家庭水处理设备,通过生物砂滤池中微生物对雨水中污染物的氧化分解及河砂的过滤使水浊度及锰得到有效地去除,日光高温灭活和光氧化降解综合作用杀灭水中致病微生物。用SBF家庭水处理设备对雨水进行处理,水中浊度、锰含量、微生物数量均达到标准的规定值。     

石英砂滤料表面润湿改性

采用硅烷偶联剂、钛酸酯偶联剂和铝酸酯偶联剂对石英砂进行表面改性,以制备亲油疏水性滤料。研究得出,钛酸酯偶联剂改性石英砂的最佳工艺条件为:偶联剂用量15%,反应温度90℃,搅拌时间15 min;硅烷偶联剂和铝酸酯偶联剂改性石英砂的最佳工艺条件均为:偶联剂用量15%,反应温度110℃,搅拌时间15 min。水对钛酸酯偶联剂改性石英砂滤料的润湿重量由改性前的1.5589 g降低到0.0282 g,水对硅烷偶联剂改性石英砂滤料的润湿重量降低到0.0607 g,水对铝酸酯改性石英砂滤料的润湿重量降低到0.2664 g。静态吸附实验表明,硅烷偶联剂、钛酸酯偶联剂和铝酸酯偶联剂改性石英砂滤料对油的吸附容量分别增加了33.67%、42.87%和22.30%。XPS和FT-IR分析表明,偶联剂均以化学键的方式包覆在石英砂滤料表面,结合稳定。