Influences of chemical activators on incinerator bottom ash

This research has applied different chemical activators to mechanically and thermally treated fine fraction (<14 mm) of incinerator bottom ash (IBA), in order to investigate the influences of chemical activators on this new pozzolanic material. IBA has been milled and thermally treated at 800 degrees C (TIBA). The TIBA produced was blended with Ca(OH)(2) and evaluated for setting time, reactivity and compressive strength after the addition of 0.0565 mole of Na(2)SO(4), K(2)SO(4), Na(2)CO(3), K(2)CO(3), NaOH, KOH and CaCl(2) into 100g of binder (TIBA+Ca(OH)(2)). The microstructures of activated IBA and hydrated samples have been characterized by X-ray diffraction (XRD) and thermogravimetry (TG) analysis. Thermal treatment is found to produce gehlenite (Ca(2)Al(2)SiO(7)), wollastonite (CaSiO(3)) and mayenite (Ca(12)Al(14)O(33)) phases. The thermally treated IBA samples are significantly more reactive than the milled IBA. The addition of Na(2)CO(3) can increase the compressive strength and calcium hydroxide consumption at 28-day curing ages. However, the addition of Na(2)SO(4), K(2)SO(4), K(2)CO(3), NaOH and KOH reduces the strength and hydration reaction. Moreover, these chemicals produce more porous samples due to increased generation of hydrogen gas. The addition of CaCl(2) has a negative effect on the hydration of TIBA samples. Calcium aluminium oxide carbonate sulphide hydrate (Ca(4)Al(2)O(6)(CO(3))(0.67)(SO(3))(0.33)(H(2)O)(11)) is the main hydration product in the samples with activated IBA, except for the sample containing CaCl(2).     

分光光度法测定COD_(Cr)的试验条件选择

用分光光度法测定水中化学需氧量ＣＯＤＣｒ,通过正交试验选择氧化的最佳选择。试验结果表明对ＣＯＤＣｒ值为５０～１０００ｍｇ／Ｌ的水样：氧化剂Ｋ２Ｃｒ２Ｏ７用量为０．２０～０．４０ｍｏｌ／Ｌ,催化剂Ａｇ２ＳＯ４用量为１０ｇ／ＬＨ２ＳＯ４,消解时间１０ｍｉｎ,加热温度１８０℃。用ＣＯＤＣｒ为１３８ｍｇ／Ｌ的质控标样进行验证试验,其绝对误差为０．５～３．０ｍｇ／Ｌ。与标准方法相比用分光光度法测定ＣＯＤＣｒ具有分析误差小,省时、省力,节约药剂的特点。     

Modeling the fate of benzo[a]pyrene in the wastewater-irrigated areas of Tianjin with a fugacity model

A Level III fugacity model was applied to characterize the transfer processes and environmental fate of benzo[a]pyrene in wastewater-irrigated areas of Tianjin, China. The physical-chemical properties and transfer parameters of benzo[a]pyrene were used in the model and the concentration distribution of benzo[a]pyrene in sediment, soil, water, air, fish, and crop compartments, as well as transfer fluxes across the compartments, were then derived under steady-state assumptions. The calculated results were compared with monitoring data for air, soil, water, and sediment collected from the literature. The results indicate that there was generally good agreement and the differences were within an order of magnitude for air, soil, and sediment. The concentration of benzo[a]pyrene in the ambient air in the area was very low with a majority present sorbed to aerosol. In the water compartment, approximately 70% of benzo[a]pyrene dissolved in water phase. Relatively high concentrations of the compound were found in the soil and sediment, with the soil serving as the dominant sink in the area. Benzo[a]pyrene, with a slow metabolic rate, was found to accumulate in fish in the area.     

低盐度对EGSB厌氧氨氧化反应器启动和运行的影响

考察了低盐度(以NaCl计,w/v)对厌氧氨氧化反应器启动和运行的影响。在水力停留时间为11 h的条件下,以普通活性污泥为接种污泥,分别以进水盐度为8 g/L和进水不含盐度启动并运行厌氧氨氧化反应器。结果表明,进水含有盐度和进水不含盐反应器启动时间分别为125 d和107 d,总氮去除率分别为(73.0±13.9)%和(78.4±3.7)%。运行阶段,进水含有盐度反应器总氮去除率始终低于进水不含盐度反应器。随回流比提升,两反应器颗粒污泥中值粒径增大。在不同回流比条件下,进水含有盐度反应器颗粒污泥中值粒径均小于进水不含盐度反应器。当回流比为7时,进水含有盐度反应器颗粒污泥EPS中多糖、蛋白质和腐殖质的含量均低于进水不含盐度反应器。两反应器EPS多糖与蛋白质的比值分别为2.8和3.1。低盐度对EGSB厌氧氨氧化反应器的启动、运行和颗粒污泥的形成有一定的影响。     

碳酸钙和海泡石组配对水稻中Pb和Cd迁移转运的影响

为研究组配改良剂LS(碳酸钙+海泡石)对农田土壤重金属Pb和Cd的固化效果以及水稻各部位吸收累积Pb和Cd的影响,在湘南2个矿区(矿区A和矿区B)附近污染稻田中施用了不同添加量的LS (0、2、4和8 g/kg),并进行了水稻种植的田间实验。结果表明,(1)施用2~8 g/kg的LS能使矿区A和矿区B土壤pH值分别增加1.11~1.95和1.61~2.31个单位,能使矿区A和矿区B土壤中Pb和Cd的TCLP提取态含量分别降低18.6%~62.7%、15.7%~37.1%和38.6%~66.7%、0~76.6%。(2)LS能不同程度地降低水稻各部位重金属含量。矿区A糙米中Pb和Cd含量降低9.4%~35.6%、56.1%~66.8%;矿区B糙米中Pb含量降低14.4%~36.6%,而Cd含量变化不明显。(3)LS对水稻中Pb和Cd在各部位之间的转运系数均有不同程度的影响,其中Pb和Cd从茎叶到谷壳的转运系数最大,说明水稻茎叶对重金属的转运能力最强。(4)LS添加量为8 g/kg时,Pb和Cd从谷壳到糙米的转运系数最小,且糙米中Pb和Cd含量最低。     

Inexact fuzzy-stochastic constraint-softened programming – A case study for waste management

In this study, an inexact fuzzy-stochastic constraint-softened programming method is developed for municipal solid waste (MSW) management under uncertainty. The developed method can deal with multiple uncertainties presented in terms of fuzzy sets, interval values and random variables. Moreover, a number of violation levels for the system constraints are allowed. This is realized through introduction of violation variables to soften system constraints, such that the model’s decision space can be expanded under demanding conditions. This can help generate a range of decision alternatives under various conditions, allowing in-depth analyses of tradeoffs among economic objective, satisfaction degree, and constraint-violation risk. The developed method is applied to a case study of planning a MSW management system. The uncertain and dynamic information can be incorporated within a multi-layer scenario tree; revised decisions are permitted in each time period based on the realized values of uncertain events. Solutions associated with different satisfaction degree levels have been generated, corresponding to different constraint-violation risks. They are useful for supporting decisions of waste flow allocation and system-capacity expansion within a multistage context.     

Environmentally Friendly Polyurethane Composites: Preparation, Characterization and Mechanical Properties

The waterborne polyurethane (PU) prepolymer was prepared based on isophorone diisocyanate (IPDI), polyester polyol (N220), dimethylol propionic acid (DMPA) and hydroxyethyl methyl acrylate (HEMA). The modified waterborne polyurethane–acrylate (PUA) emulsions were obtained with different proportions of acrylate (butyl acrylate and methyl methacrylate) and initiating agent by in situ dispersion technique. The structures and thermal properties of prepared PU and PUA were analyzed and characterized with FT-IR, UV–Vis spectroscopy and DSC. The PUA hybrid samples had lower glass transition temperature of hard segment and higher decomposition temperatures than PU sample. Performances of the emulsion and film were studied by means of apparent viscidity, particle size and polydispersity, surface tension and mechanical properties. The results indicated that the particle sizes of the PUA dispersions were larger than those of the pure PU and the solvent resistance, mechanical properties of PUA films was improved compare with the unmodified polyurethane film. The film had the biggest hardness and the least water absorption when the BA/MMA mass ratio 5:5 modified PU. The obtained PUA have great potential application such as coatings, leather finishing, adhesives, sealants, plastic coatings and wood finishes.     

Monitoring method for airborne glymes and its application in fuel exhaust emission measurement.

A monitoring method based on solvent extraction of adsorbed target glymes followed by gas chromatograph-mass spectrometry GC-MS analysis was developed for seven glymes, namely ethylene glycol dimethyl ether, propylene glycol dimethyl ether, ethylene glycol diethyl ether, diethylene glycol dimethyl ether, diethylene glycol diethyl ether, triethylene glycol dimethyl ether, and tetraethylene glycol dimethyl ether. The best recoveries of target glymes were achieved when using a combination of sample collection medium of graphitised carbon black (GCB) with a solvent mixture of methylene chloride and methanol (95/5, v/v). Method detection limits ranged from 1.5 microg/m3 for diethylene glycol diethyl ether to 13.2 microg/m3 for ethylene glycol diethyl ether based on a sample volume of 3.4 1. Using this method, diethylene glycol dimethyl ether and diethylene glycol diethyl ether were detected and measured successfully in diluted vehicle exhausts in diesel fuel engine tests.     

Feeding and respiration rates of a planktonic copepod (<Emphasis Type="Italic">Calanus sinicus</Emphasis>) oversummering in Yellow Sea Cold Bottom Waters

The distribution, feeding and oxygen consumption of Calanus sinicus were studied in August 2001 on a transect across Yellow Sea Cold Bottom Waters (YSCBW) and two additional transects nearby. The distribution of C. sinicus adults and copepodites stage CV appeared to be well correlated with water temperature. They tended to concentrate in the YSCBW (>10,000 ind. m^–2) to avoid high surface temperature. Gut pigment contents varied from 0.44 to 2.53 ng chlorophyll a equivalents (chl a equiv.) ind.^–1 for adults, and from 0.24 to 2.24 ng chl a equiv. ind.^–1 for CV copepodites. We found no relationship between gut pigment contents and the ambient chl a concentrations. Although the gut evacuation rate constants are consistent with those measured for other copepods, their low gut pigment contents meant an estimated daily herbivorous ingestion of <3% of body carbon in the YSCBW and <10% outside the YSCBW. However, based on estimates of clearance rates, C. sinicus feeds actively whether in the YSCBW or not, so the low ingestion rates probably reflect shortage of food. Oxygen consumption rates of C. sinicus ranged from 0.21 to 0.84 l O₂ ind.^–1 h^–1, with high rates often associated with high temperature. From the oxygen consumption rates, daily loss of body carbon was estimated to be 4.0–13.7%, which exceeds our estimates of their carbon ingestion rates. C. sinicus was probably not in diapause, either within or outside the YSCBW, but this cold-water layer provides C. sinicus with a refuge to live through the hot, low-food summer.Communicated by T. Ikeda, Hakodate