水稻生产气象灾害危险性分析：—以湖南省常德市水稻生产为例

本文通过对研究区水稻气象灾害规律的研究和危险性评价,计算了不同等级的水稻综合风险率,为保险部门制定水稻保险费率提供了科学依据.     

地震科技人员开发能力的灰色关联分析

应用灰色系统理论，根据江苏省地震工程研究院的地震科技开发资料，分别以项目负责人的年龄、学历、职称、职务、学科作为比较数列，对年度内完成的实际合同额进行了多因素灰色关联分析，排出了关联序。研究结果客观地揭示了开发能力与人的各种因素——年龄、学历、职称、职务、学科之间的相互关系，为市场经济条件下，地震科技人才的开发、培养和应用，提供了科学依据。     

Thermogravimetric analysis and kinetic study on pyrolysis of representative medical waste composition

To obtain detailed information on the pyrolysis characteristics, a thermogravimetric study on the pyrolysis of 14 typical medical waste compositions was carried out in thermogravimetric analysis (TGA) equipment using dynamic techniques in a stream of N(2). An index representing pyrolysis reactivity of waste was presented. Kinetic parameters were obtained by Coats-Redfern method and used to model the TG curve. The results showed that: (a) Plastic, protein, cellulosic material, synthetic fibre, and rubber entered pyrolysis process in succession. (b) There was one decomposition stage in the pyrolysis of one-off medical glove, operating glove, cellulosic waste, absorbable catgut suture and adhesive plaster, while other components had two obvious weight loss stages. (c) The obtained apparent activation energy for second stage pyrolysis was comparably higher than that for first stage. (d) Each stage was controlled by only one kinetic mechanism, in which kinetic parameters were constant. (e) The degradation kinetics of medical waste may be affected by special physical and chemical treatment in the product manufacturing process. (f) Among 13 waste samples, the pyrolysis index of cellulosic matter was the highest, which indicated cellulosic matter had strong pyrolysis reactivity. (g) With increasing heating rate, TG curve and DTG peak shifted to high temperatures and main reaction interval of the sample became longer.     

Influence of clay minerals on the reduction of Cr6+ by citric acid

The influence of clay minerals on the reduction of Cr6+ by citric acid was investigated at pH values 4.0, 4.5 and 5.0 at 25 degrees C. The results indicate that montmorillonite and illite greatly accelerate the reduction reactions at pH 4.0 and 4.5, but their effects are dramatically reduced at pH 5.0. The role of clay minerals in accelerating the reactions is in the order: illite>montmorillonite>kaolinite, which has a positive correlation with the amount of Mn2+ adsorbed on the surfaces of these minerals. With light, Fe(3+) also significantly increases reaction rates. Ethylenediaminetetraacetic acid (EDTA) greatly suppresses the acceleration of the reduction reactions by these minerals, indicating that EDTA competes with citric acid for Mn2+. Thus, the formation of complexes between Mn(2+) and citric acid could be a prerequisite for the acceleration of the reductions of Cr6+ by clay minerals. In addition, there is no relationship between the specific surface area of clay minerals and the reduction rate of Cr6+ by citric acid.     

Assessing the Geographic Representativeness of Genebank Collections: the Case of Bolivian Wild Potatoes

Abstract: Genebank collection databases can be used for ecogeographical studies under the assumption that the accessions are a geographically unbiased sample. We evaluated the representativeness of a collection of wild potatoes from Bolivia and defined and assessed four types of bias: species, species-area, hotspot, and infrastructure. Species bias is the sampling of some species more often than others. Species-area bias is a sampling that is disproportionate to the total area in which a species is found. Hotspot bias is the disproportionate sampling of areas with high levels of diversity. Infrastructure bias is the disproportionate sampling of areas near roads and towns. Each of these biases is present in the Bolivian wild potato collection. The infrastructure bias was strong: 60% of all wild potato accessions were collected within 2 km of a road, as opposed to 22%, if collections had been made randomly. This analysis can serve as a guide for future collecting trips. It can also provide baseline information for the application of genebank data in studies based on geographic information systems.     

应用D412螯合树脂治理含镍电镀废水的研究

本文研究了Ｄ４１２螯合树脂对Ｎｉ（Ⅱ）离子静态和动态的吸收性能,并且研究了使用Ｄ４１２树脂除去和回收电镀废水中镍的最佳条件。     

Sorption of polar and nonpolar aromatic compounds to four surface soils of eastern China

Improved predictions on the fate of organic pollutants in surface environments require a better understanding of the underlying sorption mechanisms that control their uptake by soils. In this study, we monitored sorption of nine aromatic compounds with varying physicochemical properties (hydrophobicity, electron-donor/acceptor ability and polarity), including two polycyclic aromatic hydrocarbons, two chlorobenzenes, two nitroaromatic compounds, dichlobenil, carbaryl and 2,4-dichlorophenol in aqueous suspension of four surface soils of eastern China. The tested soils were characterized with respect to organic carbon (OC) content, black carbon content, mineralogy, morphology and size fraction to assess the role of the diverse soil characteristics in sorption. The results of this study show that not only the solute hydrophobicity and the OC content of soil are important to the retention of organic pollutants, but also the solute molecular structure and the soil nature.     

基于Arrhenius模型和Peck模型的分段非线性加速模型

目的 解决Arrhenius模型无法估计湿度应力敏感产品和Peck模型试验时间较长的问题。方法 考虑温度应力和湿度应力对产品贮存寿命的综合影响,在产品激活能不变的假设下,将Arrhenius模型对产品激活能的估计和Peck模型对湿度应力参数的估计相结合,建立Arrhenius&Peck分段非线性加速寿命估计模型。基于此模型,在双应力恒加试验条件下,得到产品的寿命估计方程。结果 以弹上电子产品的恒定应力加速贮存试验为例,进行仿真分析,得到产品寿命的估计,并对比产品实际寿命。Arrhenius&Peck模型的寿命误差和失效率误差均控制在5%以内,准确度高于Arrhenius模型和Peck模型。结论 构建的Arrhenius&Peck分段非线性加速寿命模型可以充分利用温度和湿度条件下的试验数据,对温湿敏感产品的寿命估计有较好的应用效果,为导弹产品的寿命估计提供一种可选方法。     

天津地区鱼塘水、悬浮物、沉积物和鱼体中的DDT

采样测定了天津地区2典型鱼塘鲫鱼、鲢鱼、水、悬浮物、沉积物和鱼塘周边表土中的DDT及其代谢产物含量。结果发现,2鱼塘各主要介质以及鱼体肌肉和器官中都富集了较高浓度的DDT。鲫鱼和鲢鱼肌肉中DDT的含量分别为(66.4±2.7)ng·g-1和(24.3±23.4)ng·g-1。肝胰脏、肠和鱼鳃中DDT含量一般高于肌肉,其中肠的富集量最大,是肌肉的3倍以上。生物富集系数(lgBCF)分别为3.7和3.3。2鱼塘鱼体和各相含量有较大差别,鱼塘介质中悬浮物富集浓度最高。表土污染相对严重地区的鱼塘中各介质和鱼体DDT含量均高于另一污染较轻的鱼塘。污染严重鱼塘的DDE/ΣDDT含量比值也相对较高,反映早期污染残留的重要特征。尽管如此,仍然较高的DDT含量以及悬浮物中很低的DDE/ΣDDT含量比值说明很可能还有污染源存在。     

2010—2019年成都市机动车排污特征分析及防控措施减排效果评估

为评估2010—2019年成都市机动车防控措施的减排效果,以2010年为基准年,采用排放清单法计算了各减排措施下2019年的减排量,对比分析了4种控制措施的减排效益。结果表明：成都市机动车排污总量逐年下降,2019年PM_2.5、NO_x、VOCs、CO、SO₂和NH₃的排放量分别为0.27×10⁴、4.63×10⁴、1.70×10⁴、28.99×10⁴、0.21×10⁴和0.45×10⁴ t,主要分布在中心城区,其中重型货车对PM_2.5和NO_x贡献最大,小型客车对VOCs、CO、SO₂和NH₃贡献最大;措施中加严标准的综合减排量最大,重点减排车型为小型客车、轻型货车、公交车等,2019年6种污染物减排量分别为0.14×10⁴、2.27×10⁴、1.29×10⁴、6.77×10⁴、0.07×10⁴和0.38×10⁴ t;优化城市交通管理对小型客车和摩托车的减排效果显著,2019年6种污染物减排量分别为0.04×10⁴、0.81×10⁴、0.38×10⁴、2.55×10⁴、0.05×10⁴和0.04×10⁴ t;淘汰高排放车辆对小型客车、轻型货车等的减排较明显,2019年6种污染物减排放量分别为0.13×10⁴、0.98×10⁴、0.34×10⁴、2.62×10⁴、0.01×10⁴和0.007×10⁴ t;推广清洁能源汽车的重点减排车型为出租车和公交车,虽然可有效减少PM_2.5、NO_x的排放,但VOCs却有小幅增加,2019年6种污染物减排放量分别为0.12×10⁴、0.62×10⁴、−0.13×10⁴、0.30×10⁴、0.004×10⁴和0.000 5×10⁴ t。