负载型催化剂光催化氧化五氯苯酚钠的效果

研究以TiO₂ 为基本活性组分、空心玻璃珠为载体、硅酸钠为粘合剂的负载型催化剂的制备技术 .选取五氯苯酚钠 (PCP-Na)为处理对象 ,结合对催化剂比表面和晶型结构的表征 ,对制备的催化剂进行筛选评价 .实验结果表明 :在适当的条件下 (二氧化钛、空心玻璃珠、40%硅酸钠溶液重量比为 4∶20∶2,650℃下烧 3h)所制备的C3型催化剂不仅光催化活性高 ,且负载牢固 ,易与水分离 .对初始COD_Cr=400mg·L^-1,PCP-Na=10mg·L^-1的反应液 ,在光照强度为 30kW·m^-2下 2hCOD_Cr去除率大于 65% ,PCP-Na去除率大于 92%.试验进一步探讨C3型催化剂投加量、反应液初始浓度、供氧量对催化反应的影响 .     

Variations in global temperature and precipitation for the period of 1948 to 2010

Climate change has impacts on both natural and human systems. Accurate information regarding variations in precipitation and temperature is essential for identifying and understanding these potential impacts. This research applied Mann–Kendall, rescaled range analysis and wave transform methods to analyze the trends and periodic properties of global and regional surface air temperature (SAT) and precipitation (PR) over the period of 1948 to 2010. The results show that 65.34 % of the area studied exhibits significant warming trends (p?<?0.05) while only 3.18 % of the area exhibits significant cooling trends. The greatest warming trends are observed in Antarctica (0.32 °C per decade) and Middle Africa (0.21 °C per decade). Notably, 62.26 % of the area became wetter, while 22.01 % of the area shows drying trends. Northern Europe shows the largest precipitation increase, 12.49 mm per decade. Western Africa shows the fastest drying, ?21.05 mm per decade. The rescaled range analysis reveals large areas that show persistent warming trends; this behavior in SAT is more obvious than that in PR. Wave transform results show that a 1-year period of SAT variation dominates in all regions, while inconsistent 0.5-year bands are observed in East Asia, Middle Africa, and Southeast Asia. In PR, significant power in the wavelet power spectrum at a 1-year period was observed in 17 regions, i.e., in all regions studied except Western Europe, where precipitation is instead characterized by 0.5-year and 0.25-year periods. Overall, the variations in SAT and PR can be consistent with the combined impacts of natural and anthropogenic factors, such as atmospheric concentrations of greenhouse gases, the internal variability of climate system, and volcanic eruptions.     

Coupling urban 3-D information and circuit theory to advance the development of urban ecological networks

Ongoing, rapid urban growth accompanied by habitat fragmentation and loss challenges biodiversity conservation and leads to decreases in ecosystem services. Application of the concept of ecological networks in the preservation and restoration of connections among isolated patches of natural areas is a powerful conservation strategy. However, previous approaches often failed to objectively consider the impacts of complex 3-D city environments on ecological niches. We used airborne lidar-derived information on the 3-D structure of the built environment and vegetation and detailed land use and cover data to characterize habitat quality, niche diversity, and human disturbance and to predict habitat connectivity among 38 identified habitat core areas (HCAs) in Nanjing, China. We used circuit theory and Linkage Mapper to create a landscape resistance layer, simulate habitat connectivity, and identify and prioritize important corridors. We mapped 64 links by using current flow centrality to evaluate each HCA's contribution and the links that facilitate intact connectivity. Values were highest for HCA links located in the west, south, and northeast of the study area, where natural forests with complex 3-D structures predominate. Two smaller HCA areas had high centrality scores relative to their extents, which means they could act as important stepping stones in connectivity planning. The mapped pinch-point regions had narrow and fragile links among the HCAs, suggesting they require special protection. The barriers with the highest impact scores were mainly located at the HCA connections to Purple Mountain and, based on these high scores, are more likely to indicate important locations that can be restored to improve potential connections. Our novel framework allowed us to sufficiently convey spatially explicit information to identify targets for habitat restoration and potential pathways for species movement and dispersal. Such information is critical for assessing existing or potential habitats and corridors and developing strategic plans to balance habitat conservation and other land uses based on scientifically informed connectivity planning and implementation.     

长江山区航道剖面能见度分析及局地影响因素初探

为了分析三峡航道不同区域能见度基本特征,比较不同垂直剖面、沿江距离对局地能见度的影响,基于中国气象局沿江、剖面布设的12个能见度监测点近3 a观测资料,对比分析了三峡航道涪陵、万州、宜昌3组区域12个监测点的能见度时空分布特征,并对能见度的局地差异做了初步讨论。结果表明：涪陵区雾情对航运安全影响最大,万州和宜昌区其次。涪陵区和万州区雾日的月际变化趋势一致,5、6月和11、12月为大雾高发时期。不同剖面能见度的日变化分析表明早晨至上午时间为大雾高发时段,午后至傍晚前为大雾低发时段。通过能见度与局地因子的关系模型验证,三峡航道能见度局地差异大部分源于监测点的海拔高度及可能的水体影响等,同组区域内,高海拔点、临近水域点平均能见度明显偏低,雾情频次也相对较高     

Growth characteristics of algae during early stages of phytoplankton bloom in Lake Taihu, China

Three treatments, sediment plus lake water (S+W), sterilized sediment plus lake water (SS+W), and sediment plus filtered lake water (S+FW), were recruited to investigate the growth characteristics of algae during pre-bloom and the importance of algal inocula in the water column and sediment. The results showed that in the water column, biomass of all algae increased in all treatments when recruitment was initiated, whereas this tendency differed among treatments with further increment of temperature. The process of algal growth consisted of two stages: Stage I, the onset of recruitment and Stage II, the subsequent growth of algae. Compared with S+W, in Stage I, SS+W significantly increased the biomass of cyanophytes by 178.70%, and decreased the biomass of non-cyanophytes by 43.40%; In Stage II, SS+W notably stimulated the growth of all algae, thus incurring the occurrence of phytoplankton bloom. Further analyses revealed that both metabolic activity and photochemical activity of algae were enhanced in SS+W, which resulted from the releasing of nutrients from sediment. These results suggest that algal growth in Stage II and algal inocula in the water column can be important factors for the formation of phytoplankton bloom. In addition, possible mechanisms promoting algal recruitment and subsequent growth of algae were explored.     

Joint effects of heavy metal binary mixtures on seed germination, root and shoot growth, bacterial bioluminescence, and gene mutation

This investigation was to assess the joint effects of metal binary mixtures on seed germination,root and shoot growth,bacterial bioluminescence,and gene mutation based on the one toxic unit(1 TU)approach.Different sensitivities and orders of toxicity of metal mixtures were observed among the bioassays.In general,mostly additive or antagonistic effects were observed,while almost no synergistic effects by the binary metal mixtures in all bioassays.Therefore,the combined effects of heavy metals in the different bioassays were difficult to generalize since they were dependent on both chemical type and the organism used in each bioassay.However, these results indicate that a battery of bioassays with mixture chemicals as opposed to just a single assay with single metal is a better strategy for the bioassessment of environmental pollutants.     

Machining efficiency of powder mixed near dry electrical discharge machining based on different material combinations of tool electrode and workpiece electrode

Powder mixed near dry electrical discharge machining (PMND-EDM) is a novel electrical discharge machining (EDM) process. It is proposed to further improve the machining efficiency of dry EDM. The principle of material removal in PMND-EDM is illustrated and its deionization principle is proposed. The influence of residual heat on MRR is analyzed. The concept of superfluous residual heat is proposed. The material removal rate (MRR), the main index of machining efficiency for PMND-EDM process, is researched. Single factor experiments are performed to get effect of peak current, pulse on time, pulse off time, flow rate, tool rotational speed, air pressure and powder concentration on MRR under different material combinations of tool electrode and workpiece electrode. Thermal phenomena in PMND-EDM are illustrated. Effect of each process parameter on MRR of PMND-EDM is gotten and analyzed based on the deionization principle of PMND-EDM. Differences in MRR under different material combinations are found out. Brass tool electrode and W18Cr4V workpiece gain higher MRR under most of discharge conditions, while the superiority of copper tool electrode and 45 carbon steel workpiece in MRR arise when there is improper heat dissipation. The difference is analyzed based on the deionization principle of PMND-EDM.     

Nitrated and parent PAHs in the surface water of Lake Taihu, China: Occurrence, distribution, source, and human health risk assessment

Nitrated polycyclic aromatic hydrocarbons (NPAHs) have toxic potentials that are higher than those of their corresponding parent polycyclic aromatic hydrocarbons (PAHs) and thus have received increasing attention in recent years. In this study, the occurrence, distribution, source, and human health risk assessment of 15 NPAHs and 16 PAHs were investigated in the surface water from 20 sampling sites of Lake Taihu during the dry, normal, and flood seasons of 2018. The ΣPAH concentrations ranged from 255 to 7298 ng/L and the ΣNPAH concentrations ranged from not-detected (ND) to 212 ng/L. Among the target analytes, 2-nitrofluorene (2-nFlu) was the predominant NPAH, with a detection frequency ranging from 85% to 90% and a maximum concentration of 56.2 ng/L. The three-ringed and four-ringed NPAHs and PAHs comprised the majority of the detected compounds. In terms of seasonal variation, the highest levels of the ΣNPAHs and ΣPAHs were in the dry season and flood season, respectively. Diagnostic ratio analysis indicated that the prime source of NPAHs was direct combustion, whereas in the case of PAHs the contribution was predominantly from a mixed pattern including pollution from unburned petroleum and petroleum combustion. The human health risk of NPAHs and PAHs was evaluated using a lifetime carcinogenic risk assessment model. The carcinogenic risk level of the targets ranged from 2.09 × 10^?7 to 5.75 × 10^?5 and some surface water samples posed a potential health risk.     

Comparison of inorganic chemical compositions of atmospheric TSP, PM10 and PM2.5 in northern and southern Chinese coastal cities

To compare the inorganic chemical compositions of TSP(total suspended paniculate),PM_(10)(particulate matter with an aerodynamic diameter less than 10 μm) and PM_(2.5)(particulate matter with an aerodynamic diameter less than 2.5 μm) in southern and northern cities in China,atmospheric particles were synchronously collected in Dalian(the northern city)and Xiamen(the southern city) in spring and autumn of 2004.The mass concentrations,twenty-three elements and nine soluble ions were assessed.The results show that in Dalian,the mass concentrations of Mg,Al,Ca,Mn and Fe in spring were 4.0-10.1,2.6-8.0,4.1-12,1.2-3.6 and 2.9-7.9 times higher,respectively,than those in Xiamen.The dust storm influence is more obvious in Dalian in spring.However,in Xiamen,heavy metals accounted for 13.9%-17.9%of TSP,while heavy metals contributed to 5.5%-9.3%of TSP in Dalian.These concentrations suggest that heavy metal pollution in Xiamen was more serious.In addition,the concentrations of Na~+,Cl~-,Ca~(2+) and Mg~(2+) were higher in Dalian due to the influence of marine aerosol,construction activities and soil dust.The NO~(3-)/SO_4~(2-) ratios in Dalian(0.25-0.49) were lower than those in Xiamen(0.51-0.62),indicating that the contributions of vehicle emission to particles in Xiamen were higher.Coefficient of divergence values was higher than 0.40,implying that the inorganic chemical composition profiles for the particles of Dalian and Xiamen were quite different from each other.