烧结烟气应用电子束脱硫脱硝技术之利弊

介绍了电子束辐照烟气脱硫技术的原理、工艺流程、主要设备及其作用;中国工程物理研究院1.2万m^3/h电子束脱硫脱硝试验装置及试验结论;成都热电厂30万m^3/h脱硫示范装置的设计参数、运行情况;综合分析了烧结烟气脱硫应用电子束辐照烟气脱硫脱硝技术之利弊,认为烧结烟气脱硫应用电子束辐照烟气脱硫技术不失为一个可供选择且可行的技术.     

延边地区公路沿线边坡失稳试验分析

延边地区公路沿线分布着大量软岩，其岩性具有强膨胀性，致使这一地区公路边坡出现了多处滑坡现象。为了合理地处理这一工程地质问题，需要认真研究该种软岩的膨胀特性。选取滑坡体软岩为研究对象，定量分析了其自由膨胀率、无荷膨胀率和有荷膨胀率，并具体测定了其膨胀力，探讨了其膨胀率和膨胀力的变化规律，揭示了研究区软岩的膨胀特性，为公路建设中软岩边坡加固参数的选取提供了科学的依据。     

德国环境统计概述及启示

本文介绍了德国环境统计的基本情况,并指出了值得我们学习和借鉴的经验。     

树脂相分光光度法测定水中痕量苦味酸

建立了树脂相分光光度法测定水中痕量苦味酸的新方法。该法灵敏度高,表观摩尔吸光系数为1.08×105L/(mol·cm);精密度理想(测定苦味酸质量浓度为5μg/mL的实验5次,相对标准偏差为1.0%);线性范围为0～7.0μg/mL;以3σ衡量,检出限为0.14μg/mL;加标回收率为97%～103%。采用该法直接测定水样中的苦味酸、间接测定烟草中的烟碱,结果令人满意。     

BaO/γ-Al2O3同时吸附脱除一氧化氮和二氧化硫

利用固定床连续流动反应器研究了BaO／γ—Al2O，同时吸附模拟烟气中NO和SO2的工艺条件和再生循环使用性能，对BaO／γ—Al2O3进行了比表面积和程序升温表面反应（TPSR）等表征分析。结果表明，BaO／γ—Al2O3的适宜工艺条件是SO2与NO体积比为2．9～8．4、原料气中O2体积分数大于4．5％、吸附温度448～523K。BaO／γ—Al2O3在循环使用过程中吸附能力下降。与NOXSO吸附催化剂Na2CO3／γ—Al2O3相比，BaO／γ-Al2O3同时吸附SO2和NO的能力大、再生循环使用性能好、适宜的SO2与NO体积比范围宽、热稳定性好。将BaO／γ—Al2O3应用于NOXSO工艺可望提高该工艺的脱硫、脱氮效率。     

Use of Microbial Community to Evaluate Performance of a Wetland System in Treating Pb/Zn Mine Drainage

The performance of a wetland system in treating lead (Pb)/zinc (Zn) mine drainage was evaluated by using the polyurethane foam unit (PFU) microbial community (method), which has been adopted by China as a standardized procedure for monitoring water quality. The wetland system consisted of four cells with three dominant plants: Typha latifolia, Phragmites australis and Paspalum distichum. Physicochemical characteristics [pH, EC, content of total suspended solid (TSS) and metals (Pb, Zn, Cd, and Cu)] and PFU microbial community in water samples had been investigated from seven sampling sites. The results indicated that the concentrations of Pb, Zn, Cd, Cu, and TSS in the mine drainage were gradually reduced from the inlet to the outlet of the wetland system and 99%, 98%, 75%, 83%, and 68% of these metals and TSS respectively, had been reduced in concentration after the drainage passed through the wetland system. A total of 105 protozoan species were identified, the number of protozoa species and the diversity index (DI) gradually increased, while the heterotrophic index (HI) gradually decreased from the inlet to the outlet of the wetland system. The results indicated that DI, HI, and total number species of protozoa could be used as biological indicators indicating the improvement of water quality.     

Study on NOx removal from simulated flue gas by an electrobiofilm reactor: EDTA-ferrous regeneration and biological kinetics mechanism

Environmental Science and Pollution Research - The regeneration of EDTA-FeII is a key step in electrobiofilm reduction-integrated systems for NOx removal from industrial boiler flue gas. The...     

Research status,challenges and future prospects of renewable synthetic fuel catalysts for CO2 photocatalytic reduction conversion

Environmental Science and Pollution Research - In recent years, with global climate change, the utilization of carbon dioxide as a resource has become an important goal of human society to achieve...     

Pyrolysis technologies for municipal solid waste: A review

Pyrolysis has been examined as an attractive alternative to incineration for municipal solid waste (MSW) disposal that allows energy and resource recovery; however, it has seldom been applied independently with the output of pyrolysis products as end products. This review addresses the state-of-the-art of MSW pyrolysis in regards to its technologies and reactors, products and environmental impacts. In this review, first, the influence of important operating parameters such as final temperature, heating rate (HR) and residence time in the reaction zone on the pyrolysis behaviours and products is reviewed; then the pyrolysis technologies and reactors adopted in literatures and scale-up plants are evaluated. Third, the yields and main properties of the pyrolytic products from individual MSW components, refuse-derived fuel (RDF) made from MSW, and MSW are summarised. In the fourth section, in addition to emissions from pyrolysis processes, such as HCl, SO₂ and NH₃, contaminants in the products, including PCDD/F and heavy metals, are also reviewed, and available measures for improving the environmental impacts of pyrolysis are surveyed. It can be concluded that the single pyrolysis process is an effective waste-to-energy convertor but is not a guaranteed clean solution for MSW disposal. Based on this information, the prospects of applying pyrolysis technologies to dealing with MSW are evaluated and suggested.