Water chemistry controlled aggregation and photo-transformation of silver nanoparticles in environmental waters

The inevitable release of engineered silver nanoparticles (AgNPs) into aquatic environments has drawn great concerns about its environmental toxicity and safety. Although aggregation and transformation play crucial roles in the transport and toxicity of AgNPs, how the water chemistry of environmental waters influences the aggregation and transformation of engineered AgNPs is still not well understood. In this study, the aggregation of polyvinylpyrrolidone (PVP) coated AgNPs was investigated in eight typical environmental water samples (with different ionic strengths, hardness, and dissolved organic matter (DOM) concentrations) by using UV–visible spectroscopy and dynamic light scattering. Raman spectroscopy was applied to probe the interaction of DOM with the surface of AgNPs. Further, the photo-transformation and morphology changes of AgNPs in environmental waters were studied by UV–visible spectroscopy, inductively coupled plasma mass spectrometry, and transmission electron microscopy. The results suggested that both electrolytes (especially Ca^2 + and Mg^2 +) and DOM in the surface waters are key parameters for AgNP aggregation, and sunlight could accelerate the morphology change, aggregation, and further sedimentation of AgNPs. This water chemistry controlled aggregation and photo-transformation should have significant environmental impacts on the transport and toxicity of AgNPs in the aquatic environments.     

Remarkable promotion effect of trace sulfation on OMS-2 nanorod catalysts for the catalytic combustion of ethanol

OMS-2 nanorod catalysts were synthesized by a hydrothermal redox reaction method using MnSO₄ (OMS-2-SO₄) and Mn(CH₃COO)₂ (OMS-2-AC) as precursors. SO₄^2 −-doped OMS-2-AC catalysts with different SO₄^2 − concentrations were prepared next by adding (NH₄)₂SO₄ solution into OMS-2-AC samples to investigate the effect of the anion SO₄^2 − on the OMS-2-AC catalyst. All catalysts were then tested for the catalytic oxidation of ethanol. The OMS-2-SO₄ catalyst synthesized demonstrated much better activity than OMS-2-AC. The SO₄^2 − doping greatly influenced the activity of the OMS-2-AC catalyst, with a dramatic promotion of activity for suitable concentration of SO₄^2 − (SO₄/catalyst = 0.5% W/W). The samples were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), inductively coupled plasma optical emission spectroscopy (ICP-OES), NH₃-TPD and H₂-TPR techniques. The results showed that the presence of a suitable amount of SO₄^2 − species in the OMS-2-AC catalyst could decrease the Mn–O bond strength and also enhance the lattice oxygen and acid site concentrations, which then effectively promoted the catalytic activity of OMS-2-AC toward ethanol oxidation. Thus it was confirmed that the better catalytic performance of OMS-2-SO₄ compared to OMS-2-AC is due to the presence of some residual SO₄^2 − species in OMS-2-SO₄ samples.     

The relationship between light intensity and nutrient uptake kinetics in six freshwater diatoms

In order to find effective measures to control diatom blooms, a better understanding of the physiological characteristics of nutrient uptake in diatoms is needed. A study of P and Si-uptake kinetics for diatom species from two light regimes was conducted at low (LL), moderate (ML) and high light intensities (HL) (2, 25 and 80 μmol photons/(m²·sec)), respectively. The results showed that P uptake of diatoms was heavily influenced by historic light regimes. P affinity changed with growth and photosynthetic activity. The lowest half saturation constant for P uptake (K_m(P)) was under HL for high-light adapted diatoms while the lowest half-saturation constant for low-light adapted diatoms was observed under LL. The Si half-saturation constant (K_m(Si)) increased with increasing light intensities for pennate diatoms but decreased for centric diatoms. Diatom volumes were correlated with the maximum Si uptake rates (V_m(Si)) at HL and K_m(Si) at ML and HL for six diatom species. Our results imply that when we assess the development of diatom blooms we should consider light intensity and cell volume in addition to ambient Si or P concentration. The relationship between light intensity and P-uptake suggests that we can find suitable methods to control diatom blooms on the basis of reducing phytoplankton activity of P-uptake and photosynthesis simultaneously.     

Responses of soil ammonia oxidizers to a short-term severe mercury stress

The responses of soil ammonia-oxidizing archaea(AOA) and ammonia-oxidizing bacteria(AOB) to mercury(Hg) stress were investigated through a short-term incubation experiment.Treated with four different concentrations of Hg(CK,Hg25,Hg50,and Hg100,denoting 0,25,50,and 100 mg Hg/kg dry soil,respectively),samples were harvested after 3,7,and 28 day incubation.Results showed that the soil potential nitrification rate(PNR) was significantly inhibited by Hg stress during the incubation.However,lower abundances of AOA(the highest in CK: 9.20 × 10~7 copies/g dry soil; the lowest in Hg50: 2.68 × 10~7 copies/g dry soil) and AOB(the highest in CK: 2.68 × 10~7 copies/g dry soil; the lowest in Hg50:7.49 × 10~6 copies/g dry soil) were observed only at day 28 of incubation(P 0.05).Moreover,only the community structure of soil AOB obviously shifted under Hg stress as seen through DGGE profiles,which revealed that 2–3 distinct AOB bands emerged in the Hg treatments at day 28.In summary,soil PNR might be a very useful parameter to assess acute Hg stress on soil ecosystems,and the community structure of soil AOB might be a realistic biological indicator for the assessment of heavy metal stress on soil ecosystems in the future.     

Sulfide elimination by intermittent nitrate dosing in sewer sediments

The formation of hydrogen sulfide in biofilms and sediments in sewer systems can cause severe pipe corrosions and health hazards, and requires expensive programs for its prevention. The aim of this study is to propose a new control strategy and the optimal condition for sulfide elimination by intermittent nitrate dosing in sewer sediments. The study was carried out based on lab-scale experiments and batch tests using real sewer sediments. The intermittent nitrate dosing mode and the optimal control condition were investigated. The results indicated that the sulfide-intermittent-elimination strategy by nitrate dosing is advantageous for controlling sulfide accumulation in sewer sediment. The oxidation–reduction potential is a sensitive indicator parameter that can reflect the control effect and the minimum N/S(nitrate/sulfide)ratio with slight excess nitrate is necessary for optimal conditions of efficient sulfide control with lower carbon source loss. The optimal control condition is feasible for the sulfide elimination in sewer systems.     

膨润土负载纳米铁的改性及对水中As(Ⅴ)的吸附

用十六烷基三甲基溴化铵(CTMAB)对膨润土负载纳米零价铁(Bent-n ZVI)进行表面改性,得到表面改性膨润土负载纳米铁(Bent-n ZVI)/CTMAB。通过SEM、Zeta电位和中位径d(50)分析,与膨润土(Bent)、改性膨润土(CTMAB-Bent)、Bent-n ZVI进行了对比,结果表明:相比Bent-n ZVI,(Bent-n ZVI)/CTMAB中的纳米铁颗粒更为分散且呈链状分布,d(50)仅为5.21μm,并且Zeta电位为+0.65 m V,更易静电吸引和吸附阴离子As O43-。4种材料的除砷结果亦表明其中(Bent-n ZVI)/CTMAB去除率最高,达到了93.9%。光电子能谱(XPS)分析表明(Bent-n ZVI)/CTMAB的除砷产物中只有As(Ⅴ),并不存在其还原态As(Ⅲ),说明(Bent-n ZVI)/CTMAB是通过吸附作用去除As(Ⅴ)。     

裂隙对雾龙洞岩溶发育及地下径流的影响分析

尝试利用裂隙测量结果探究区域岩溶发育规律。采用统计窗口法对湖北鄂西地区雾龙洞岩溶流域的碳酸盐岩地层进行了大量的裂隙测量,分析了流域内裂隙发育的情况,研究了裂隙的几何参数——倾向、倾角、隙宽、线密度、面裂隙率等在不同层位、不同裂隙分组内的变化情况;结合构造、岩溶洼地发育方向、洞穴野外探测结果,综合分析了裂隙发育对本区岩溶发育的影响;运用渗透张量理论对岩溶流域裂隙的各向异性和非均质性进行了研究,并分析了雾龙洞岩溶流域地下水的主要渗流方向形成的原因,对查明雾龙洞岩溶流域岩溶发育规律以及地下水的运移、赋存规律具有一定的指导作用。     

东江流域表层土中全氟化合物的空间分布及来源解析

为探究东江流域土壤中全氟化合物(perfluorinated compounds,PFCs)分布特征和潜在来源,2013年8月采集东江流域19份表层土样品,利用高效液相色谱-串联质谱联用(HPLC-MS/MS)技术分析了16种PFCs的含量。结果表明,东江流域表层土总PFCs(∑PFCs)含量范围在2.15~5.49μg/kg dw。所采集的表层土样品中,东江东莞段土壤∑PFCs含量明显高于惠州段,全氟辛烷磺酸(0.65~1.28μg/kg dw)为最主要的污染物。与国内相关研究数据相比,东江流域土壤PFCs含量水平整体较高,这可能与流域产业结构和经济活动有关。主成分分析结果表明,电镀防雾剂、食品包装和全氟羧酸的生产过程、大气沉降、电化学氟化过程为东江流域土壤中PFCs的主要来源。与土壤有机质含量相关性研究表明,PFCs更容易分配到有机质含量高的土壤中,且随着PFCs分子碳链的增加,这种趋势更加显著。     

密封充氢环境条件下固态电化学氢气传感器效应试验研究

目的研究密闭充氢环境下固态电化学氢气传感器效应。方法设计能模拟低氧、低氢和压力变化的密闭充氢环境,并在此环境中进行一系列氢气传感器效应试验,分析、评定试验数据。结果得到了不同环境下氢气、氧气浓度随时间变化的规律,提出固态电化学氢气传感器的有效工作环境,并预测了其在不同贮存环境下的工作寿命。结论密闭充氢环境内压力和温度的变化对固态电化学氢气传感器影响较大,湿度影响较小,注气检定合格的氢气传感器,在密封容器内扩散式检定,不合格率高,检定数据误差大于±5%FS。