复合膜生物反应器处理环氧氯丙烷废水

实验利用复合膜生物反应器处理以甘油为原料制备环氧氯丙烷产生的废水,考察了不同进水COD、水力停留时间以及盐度对处理能力的影响,并进行盐度冲击实验。生物处理后出水进行了深度处理的研究。结果表明:进水COD对处理能力影响较小;适当延长水力停留时间能优化出水水质;废水盐度高于22g/L时会对微生物产生抑制作用;深度处理能进一步降低出水COD;微生物通过一定时间的驯化期能适应并处理高盐度废水。     

不同石化污泥配比的堆肥处理对青梗菜生长的影响

试验针对石化污泥生物堆肥,开展了五种不同物料配比和是否添加微生物菌剂的对比试验。试验结果表明:随着堆肥物料中石化污泥配比的提高,堆肥的含水率增大,种植青梗菜的平均单株株高、株重减小,单位面积产量也降低。堆肥物料配比相同的处理Ⅱ与处理Ⅴ对比发现,堆肥处理过程中未添加微生物菌剂的处理Ⅴ的青梗菜的平均单株株高、株重、单位面积产量显著低于添加微生物菌剂的处理Ⅱ,甚至低于石化污泥配比为100%并添加微生物菌剂的处理Ⅳ,试验表明,堆肥过程中添加微生物菌剂,其作用不仅可以提高石化污泥生物堆肥的堆体温度,缩短堆肥周期,而且可提高堆肥在农业种植应用中的效果。     

Effects of physical and chemical characteristics of surface sediments in the formation of shallow lake algae-induced black bloom

Surface sediments are closely related to lake black blooms. The dissolved oxygen （DO） distribution and its penetration depth in surface sediments as well as the migration and transformation of redox sensitive elements such as Fe and S at the sediment-water interface are important factors that could influence the formation of the black bloom. In this study, dredged and undredged sediment cores with different surface properties were used to simulate black blooms in the laboratory. The Micro Profiling System was employed to explore features of the DO and ∑H2S distribution at the sediment-water interface. Physical and chemical characteristics in sediments and pore waters were also analyzed. The results showed that sediment dredging effectively suppressed the black blooms. In the undredged treatment, DO penetration depth was only 50 μm. Fe^2＋ concentrations, ∑H2S concentrations, and ∑H2S production rates were remarkably higher in surface sediments and pore waters compared to control and dredged treatments. Furthermore, depletion of DO and accumulation of Fe^2＋ and ∑H2S in surface sediments and pore waters provided favorable redox environments and necessary material sources for the blooms. The study results proved that physical and chemical characteristics in surface sediments are important factors in the formation of the black bloom, and could provide scientific guidance for emergency treatment and long-term pre-control of black blooms.     

Preparation of MgO/B2O3 coatings by plasma spraying on SUS304 surface and effects of heat-resistant

This study mainly deals with the preparation of MgO/B₂O₃ coatings by plasma spraying on the SUS304 surface and the effects of heatresistant. The power materials of low thermal conductivity were selected to control the heat divergent performance of high temperature parts. The reticular micro-structure between the cover thermal layer and the substrate was prepared by using the plasma spraying method. The powder mixture of MgO and B₂O₃ were selected as spraying materials and the SUS304 was used as the substrate material. The MgO/B₂O₃ coating was prepared on the surface of the SUS304 to provide better cover thermal performance. The properties of the microstructures and the morphologies were studied by Optical Microscope, Scanning Electron Microscope, Electron Probe Microanalyzer, and X-ray Diffraction. The results showed that the cover thermal performance has been improved.     

Numerical simulation of alga growth and control in Dalian Bay

WAHMO model was used to simulate the distribution of pollutants in Dalian Bay, China as to predict well as the growth and control of alga. The observed and predicted values of main pollutants showed a good trend at all study locations and the different between them can be ignored. Simulation results illustrated that phosphate was one of limited factors to control algal growth at the location near the sewage outfall, meanwhile, away from the sewage outfall, the synergy of ammonium nitrogen and phosphate was the limited factor.     

Photocatalytic degradation of carbofuran in TiO2 aqueous solution：Kinetics using design of experiments and mechanism by HPLC/MS/MS

The photocatalytic degradation kinetics of carbofuran was optimized by central composite design based on response surface methodology for the first time. Three variables, TiO2 concentration, initial pH value and the concentration of carbofuran, were selected to determine the dependence of degradation efficiencies on independent variables. Response surface methodology modeling results indicated that the degradation efficiency of carbofuran was highly affected by the initial pH value and the concentration of carbofuran. Then nine degradation intermediates were detected by HPLC/MS/MS. The Frontier Electron Densities of carbofuran were calculated to predict the active sites on carbofuran attacked by hydroxyl radicals and photoholes. Point charges were used to elucidate the chemisorption pattern on TiO2 catalysts during the photocatalytic process. By combining the experimental results and calculation data, the photocatalytic degradation pathways of carbofuran were proposed, including the addition of hydroxyl radicals and the cleavage of the carbamate side chain.     

Electrochemical and spectroscopic characteristics of dissolved organic matter in a forest soil profile

Dissolved organic matter （DOM） represents one of the most mobile and reactive organic compounds in ecosystem and plays an important role in the fate and transport of soil organic pollutants, nutrient cycling and more importantly global climate change. Electrochemical methods were first employed to evaluate DOM redox properties, and spectroscopic approaches were utilized to obtain information concerning its composition and structure. DOM was extracted from a forest soil profile with five horizons. Differential pulse voltammetry indicated that there were more redox-active moieties in the DOM from upper horizons than in that from lower horizons. Cyclic voltammetry further showed that these moieties were reversible in electron transfer. Chronoamperometry was employed to quantify the electron transfer capacity of DOM, including electron acceptor capacity and electron donor capacity, both of which decreased sharply with increasing depth. FT-IR, UV-Vis and fluorescence spectra results suggested that DOM from the upper horizons was enriched with aromatic and humic structures while that from the lower horizons was rich in aliphatic carbon, which supported the findings obtained by electrochemical approaches. Electrochemical approaches combined with spectroscopic methods were applied to evaluate the characteristics of DOM extracted along a forest soil profile. The electrochemical properties of DOM, which can be rapidly and simply obtained, provide insight into the migration and transformation of DOM along a soil profile and will aid in better understanding of the biogeochemical role of DOM in natural environments.     

潜流人工湿地处理农村生活污水动力学研究

考察潜流人工湿地处理农村生活污水的运行效果,并探寻一级动力学常数的空间变化情况,采用"厌氧调节池+二级串联潜流式人工湿地"工艺处理农村生活污水。结果表明,经过3个月运行后人工湿地对污水中COD、TP、TN和NH3-N的去除率分别达到了79.13%,71.54%,57.26%和60.01%。通过湿地原位检测显示以上各类污染物在生物床内都有较明显的沿程下降趋势,在床体的前半部分污染物的降解较快,后半部分相对缓慢。农村生活污水中污染物去除动力学符合一级动力学模型,一级生物床中COD、TP、TN和NH3-N的去除,Kv均值分别为3.048、2.469、1.625和1.695;二级生物床中Kv均值分别为2.542、1.946、1.383和1.453。生物床Kv呈现出减小的趋势说明生物床前端对各类污染物的降解速率比后端快。生物床间的跌水池的复氧,增加了二级生物床前端的Kv,提高了对污染物的降解速率。     

基于单颗粒质谱信息气溶胶分类方法的研究进展

气溶胶质谱仪在对气溶胶颗粒的监测过程中会产生大量单颗粒的化学成分和粒径信息,基于这些质谱数据能够推测颗粒的来源。而对气溶胶来源的分析,很大程度上是由颗粒的种类决定的,故对海量数据的分类就成为不可忽略的步骤。针对气溶胶质谱仪采集到的数据,概述了用于气溶胶分类的多种方法的理论核心、分类步骤及各自的优缺点等。据此可为今后气溶胶分类方法的研究提供建设性意见。     

曝气生物滤池去除邻苯二甲酸丁基苄酯的效果

采用陶粒滤料曝气生物滤池(BAF)处理邻苯二甲酸丁基苄酯(BBP)模拟废水,考察了空床接触时间(EBCT)、温度对BBP的去除效果的影响;运用气质联用仪(GC-MS)分析了BBP在曝气生物滤池内降解的中间产物并推测其可能的降解途径。结果表明,当温度为25℃,空床接触时间(EBCT)为8 h时,BAF对BBP的降解效果良好,去除率达到95.7%;BAF对BBP的去除率随着温度的升高和EBCT的增加而增大,EBCT为去除效果的主要影响因素。BAF出水中检测到邻苯二甲酸二丁酯(DBP)、邻苯二甲酸二甲酯(DMP)以及邻苯二甲酸(PA)等降解产物,据此推测邻苯二甲酸丁基苄酯的生物降解途径可能为BBP的苯环先断裂生成邻苯二甲酸二丁酯,而后断裂一个酯键形成单酯,接着再断裂另一酯键形成邻苯二甲酸,最终分解成二氧化碳和水。