Characterization on the toxic mechanism of two fluoroquinolones to trypsin by spectroscopic and computational methods

Abstract

Ciprofloxacin (CPFX) and enrofloxacin (ENFX), two of the most widely used fluoroquinolones (FQs), pose a great threat to humans and the ecosystem. In this study, the toxic mechanisms between the two FQs and trypsin were evaluated by means of multiple spectroscopic methods, as well as molecular docking. During the fluorescence investigations, both FQs quenched the intrinsic fluorescence of trypsin effectively, which was due to the formation of moderately strong complexes (mainly through van der Waals forces and hydrogen bonds). The binding of two FQs not only caused the conformational and micro-environmental changes of trypsin, but also changed its molecular activity; shown by the UV–Visible absorption spectroscopy, synchronous fluorescence spectroscopy, and functional tests. The established methods in this work can help to comprehensively understand the transport of FQs in the human body.     

水解酸化-A~2O污泥减量工艺的运行性能研究

生物处理单元采用水解酸化、多级串联接触曝气、连续流的除磷脱氮A2/O工艺,并辅以外排厌氧富磷污水侧流除磷,开发了一个新型的具有强化除磷脱氮功能的污泥减量HA-A/A-MCO工艺。用该工艺处理校园生活污水发现,在SRT60 d、进水COD 316~407 mg/L、NH4+-N30~40 mg/L、TN35~53 mg/L、TP 8~12 mg/L的条件下,出水COD≤18 mg/L、NH4+-N≤2.1 mg/L、TN≤10.3 mg/L、TP≤0.44 mg/L。研究还发现,水解酸化池处理产生的VFA能有效促进生物除磷脱氮,导致厌氧释磷量达57 mg/L,进入化学除磷池的侧流液量仅相当于进水量的13%;系统最主要的脱氮形式是SND和缺氧反硝化,SND脱氮占脱氮总量的50%,缺氧反硝化占26%;HA-A/A-MCO系统有效实现了生物相分离,并利用生物捕食作用获得较低的污泥产率,0.1 g MLSS/g COD。     

印染废水处理工艺改造及其效益分析

通过实验数据分析,对本源微生物菌剂处理印染废水的有效性进行了检验。在此基础上,确定了先生物处理后絮凝的处理方式。进而分析了印染废水原处理工艺中存在的问题,并对其进行了改造,即:以本源微生物菌剂为母菌接种于印染废水中,并结合生物铁填料对其进行处理。工艺改造成功启动后,稳定运行结果显示:复合生化池和接触氧化池的处理工艺对色度和COD的平均去除率分别为:55.69%、55.63%和78.53%、78.21%;出水pH、色度和COD的平均值分别为6.6、13倍和93 mg/L,全部满足标准要求。该工艺大大减少了污泥量,且降低了处理费用。     

类氧化硅气凝胶吸附材料的制备及其吸附性能

以有机硅高沸物和Na₂SiO₃·9H₂O为原料,采用溶胶-凝胶法制备出疏水性的类氧化硅气凝胶吸附材料。采用透射电子显微镜、傅里叶变换红外分析仪和比表面与空隙度分析仪对该吸附材料的结构进行表征。表征结果显示,该吸附材料呈海绵状多孔结构,比表面积为294.48 m²/g,孔径分布较宽（为2 ~140 nm）,平均孔径为8.95 nm。实验结果表明：采用该吸附材料常温下静态吸附处理质量浓度为10 mg/L的罗丹明B（RhB）溶液,在类氧化硅气凝胶吸附材料加入量50 g/L、静态吸附时间5 h的最佳静态吸附工艺条件下,RhB去除率为98.8%,吸附后RhB质量浓度为0.124 mg/L;采用该吸附材料常温下动态吸附处理质量浓度为15 mg/L的RhB溶液,吸附4 h后开始穿透,吸附7 h后完全穿透。穿透时间较长,表明该吸附材料具有较大的吸附容量。     

GC和HPLC测定水中苦味酸的比较

建立了气相色谱法(GC)和高效液相色谱法(HPLC)测定水中苦味酸的分析方法,并对2种方法进行比较。GC法检出限为0.000 4 mg/L,线性范围为0.0~0.050 mg/L,加标回收率为92.3%~94.1%,相对标准偏差为4.6%~8.9%。HPLC法检出限为0.02 mg/L,线性范围为0.10~5.00 mg/L,加标回收率为93.7%~96.5%,相对标准偏差为1.3%~2.0%。2种方法相比,GC法灵敏度较高,可用于痕量分析,但操作烦琐,不能有效地将苦味酸与硝基酚类干扰物分离;而HPLC法虽然灵敏度较差些,但简单、快速、稳定性好、准确度高,可有效地将苦味酸与硝基酚类干扰物分离。     

纳米材料在痕量重金属离子测定中的应用

介绍了纳米材料的吸附性能,评述了影响其分离富集重金属离子效果的主要因素,综述了纳米金属氧化物、碳纳米管及其他纳米材料在痕量重金属离子测定中的应用进展,提出提高纳米吸附材料的选择性和稳定性,开发便携式商品化的纳米材料萃取小柱是今后的发展方向.     

柳州市大气环境质量及其环境容量测算初探

在研究近年柳州市大气环境质量状况的基础上,结合气象资料确定容量控制系数为3．5,应用宏观总量控制A值法对理想大气容量进行测算,得出SO2排放严重超出理想排放总量的结论,并结合节能减排、能源结构优化、机动车尾气污染防治等提出了相关建议。     

污水再生处理絮凝工艺去除病原性原虫的机制分析

通过考察在不同的絮凝剂种类、投加量、pH和温度等操作条件下隐孢子虫和贾第鞭毛虫(以下简称"两虫")的去除特性,探讨了污水深度处理絮凝工艺去除病原性原虫的作用机制.研究发现,污水经絮凝处理后,水样中胶体的平均ζ电位与2种荧光微球(两虫替代物)去除率和剩余浊度的线性相关度不高(R:0.49、0.48、0.65);而2种荧光微球之间的去除率线性相关性较高(R=0.99),并且与水样剩余浊度的变化趋势呈一定的指数相关关系(R=0.92、0.95).因此,在本研究的各种絮凝工况下.卷扫网捕是去除病原性原虫和浊度的重要作用机制.在相同操作条件下,贾第鞭毛虫的去除率大于隐孢子虫.     

不同种类有机肥施用对稻田CH4和N2O排放的综合影响

以麦茬稻田为对象,研究基肥施用不同有机肥对稻田CH₄和N₂O排放的综合影响.结果表明:有机肥施用对稻田CH₄和N₂O排放的季节变化模式无明显影响,但影响其排放量.与施用化肥(化肥处理)相比,施用菜饼+化肥(菜饼处理)促进CH₄和N₂O的排放,其季节排放总量分别增加了252%和22%;施用小麦秸秆+化肥(秸秆处理)和牛厩肥+化肥(牛厩肥处理)明显增加CH₄排放,增加量分别为250%和45%,同时却减少N₂O排放,分别减少18%和21%;施用猪厩肥+化肥(猪厩肥处理)降低CH₄和N₂O的排放,分别降低4%和18%.对CH4和N₂O排放的综合温室效应分析表明,菜饼和秸秆处理的全球增温潜势(GWP)约为化肥处理的2.5倍,牛厩肥和化肥处理基本持平,但施用猪厩肥可减少10%～15%.各处理的GWP从高到低依次为菜饼、秸秆、牛厩肥、化肥和猪厩肥.单位产量的GWP以秸秆处理最高,菜饼次之,牛厩肥比化肥处理略高,猪厩肥处理最低.从本生长季来看,猪厩肥的施用对于实现环境效益与生产效益的协调发展具有一定作用.     

Strong ozone production at a rural site in theNorth China Plain: Mixed effects of urban plumesand biogenic emissions

Regional ozone (O₃) pollution has drawn increasing attention in China over the recent decade, but the contributions from urban pollution and biogenic emissions have not been clearly elucidated. To better understand the formation of the regional O₃ problem in the North China Plain (NCP), intensive field measurements of O₃ and related parameters were conducted at a rural site downwind of Ji'nan, the capital city of Shandong province, in the summer of 2013. Markedly severe O₃ pollution was recorded, with the O₃ mixing ratios exceeding the Chinese national ambient air quality standard on 28?days (a frequency of 78%) and with a maximum hourly value of 198 ppbv. Extensive regional transport of well-processed urban plumes to the site was identified. An observation-constrained chemical box model was deployed to evaluate in situ photochemical O₃ production on two episodes. The results show that the in situ formation accounted for approximately 46% of the observed O₃ accumulation, while the remainder (~ 54%) was contributed by regional transport of the O₃-laden urban plumes. The in situ ozone production was in a mixed controlled regime that reducing either NOx or VOCs would lead to a reduction of ozone formation. Biogenic VOCs played an important role in the local ozone formation. This study demonstrates the significant mixed effects of both anthropogenic pollution from urban zones and biogenic emission in rural areas on the regional O₃ pollution in the NCP region, and may have general applicability in facilitating the understanding of the formation of secondary pollution over China.